Question about Kitchen Ranges

Open Question

I have a Chrony as good as new but on my arrival at the shoorting range I received a error message that says the second eye does not see the projectile. Is there a repair service available?

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 8 Answers

SOURCE: Error message on new monitor

Hello,

I don't know for sure because I don't own nor have I ever used one of these monitors before but this error likely means that either that there is a problem with the resolution or the frequency coming from the video card on your computer. The recommended resolution is 1280x1024@60Hz.

You can hook your PC up to your old monitor and check the Display Settings. According to the manual for the LG1780U (and many others) 640x480, 800x600, 1024x768 and 1280x1024 should all be acceptable values, although 1280X1024 will give you she sharpest image for this monitor.

If you still need help LG offers 24/7 tech support @ 1-800-243-0000.

I hope this helps!

Posted on Jan 02, 2009

Ad
GetFaxing
  • 143 Answers

SOURCE: Notification when fax arrives

In the 90s, cell phone companies and pager companies use to provide a seperate phone number answered by a computer that you could dial with your computer modem which would page/text a specific device you specified.

Most cell phone companies no longer offer this service.

WinFax/TalkWorks can notify your pager or cellular phone (using SMS messaging) whenever new faxes or voice messages arrive.

WinFax/TalkWorks works with Tone Only, Numeric, Personalized Numeric, and Alphanumeric pagers. To use the pager notification feature, you must know:

1.the capabilities of your pager/cellular phone
2. the telephone numbers WinFax/TalkWorks must dial to connect to your service provider
3. your personal identification number (if your pager supports this feature)

Posted on May 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why can't I set clock?


The range may have arrived with a defective clock.

Jan 08, 2016 | Kitchen Ranges

2 Answers

I cant print it says I'm out of black link and I just replaced it and it's flashing E 1 6


From http://www.refreshcartridges.co.uk/igloo/clearing-canon-pixma-error-message-e13-e16/

Locate the STOP/RESET/RESUME button on your printer which is represented by a triangle within a circle on the body of your printer and is usually in red, white or black as pictured below. With the reset button located hold it down for at least five seconds and then release it.

Aug 02, 2015 | Canon PIXMA Office Equipment & Supplies

1 Answer

ERROR FF20 AND FF5


Hello Heather, this is JK. I understand that you received two error messages, F20 and F5. Typically, the F20 error indicates a communication failure between EOC and ESEC system and the F5 indicates that there is a runaway temperature. Based on the fact that you received both error messages, you may need to replace the EOC (Electronic Oven Control). Hope this helps!

Apr 19, 2014 | Frigidaire Kitchen Ranges

1 Answer

I have a sab error message


Hello, welcome to FixYa.

The message you are receiving is not actually an error, but rather your range has somehow been set in "sabbath" mode ( for the Jewish calendar I think...not the band, lol ) If you have the owners manual refer to the section referring to this an it should instruct how to reverse the setting.

All ranges do it somewhat differently. This example is generic, hopefully it works. If you are unsuccessful let me know and I'll see if I can locate it.
Hold Clock pad for 5 seconds to activate Sabbath mode. Hold Clock pad for 5 seconds to disable Sabbath mode.
Oven must be in BAKE mode before enabling SABBATH. "SAb" displays and flashes for 5 seconds. All pad inputs are disabled except for CANCEL and CLOCK pads.

This mode disables the normal 12 hour shutoff to allow operation of the bake mode for a maximum of 72 hours.
Good luck. Thank you for choosing FixYa. If this does resolve the issue, please take a moment to rate the assitance I provided as well as your experience here at FixYa.

Regards,

Macmarkus :)

Sep 19, 2011 | Maytag PGR5710 Performa Gas Kitchen Range

1 Answer

My son pushed on the screen of the dvd player with his foot and now the dvds wont play. An error message says bad disk. I noticed that the round thing inside that the dvd goes onto constantly spins. Can...


hello, The error message your seeing is due from a bad eye or (laser). It is unable to read the disk. Best bet would be to just buy a new one. These days they are really cheap an can find most places is the 50$ range. thanks.

Sep 07, 2011 | Philips Televison & Video

1 Answer

Self Cleaning won't work


The E1- F5 error is a door lock error.

The control (TIMER) has likely failed in this instance - BUT...

Sometimes when you disconnect power to a range and reconnect it the electronic range control gets confused.
You should disconnect power again for 15 seconds and reconnect and see if that helps.

If it doesn't cure the E1- F5 error hold the bake button in until E0- F2 appears in the display.
This is the error for a stuck button on the keypad and is the way to clear the memory of the electronic range control.

Sometimes these work, but if the control has failed it won't make any difference.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.*&^%TY

Feb 16, 2009 | Frigidaire 30" Self-Cleaning Freestanding...

1 Answer

Cannot set up the arrival alarm to a point


If you set your arrival alarm to .001 you are trying to hit a very small circle, only 6' in diameter and the odds of actually reaching that point are incredibly low so it's not likely the alarm will go off. Try setting your arrival alarm to .100 just to see if the arrival alarm works better.

When you set alarm to 15 second arrival you should see and hear an alarm, however, the slower you are going, the smaller the arrival circle gets, which means its gets harder to hit the area that triggers the alarm. 15 seconds is the default setting and I have found that it works fine at normal cruising speeds. If you are traveling very slowly, try bumping the arrival time up in 30 second increments to see if you can get an alarm.

When the alarm does go off, it is a very faint double beep which is hard to hear over the sound of wind and engines. I don't remember exactly how the visual arrival message appears but it is also very subtle. It appears either as a change to the menu bar at the bottom of the screen, or as a message box on the screen that dissappears very quickly. When I use that model I frequently miss the arrival alerts.

Jan 08, 2009 | Garmin GPSMAP 3210 GPS Receiver

1 Answer

Tray1:A4 SVC L1 ERROR


I too have just bought a 2nd hand printer (Tally T8006) that also worked well until the fuser oil seemingly has to 'swamped' everywhere and which now throws up the same error code as above. Will attempt to 'dry it out' and see if the code clears. Have also recently sourced an original installation CD, will check out fault codes when it arrives - Gazz

Aug 31, 2007 | Tally T8006e Laser Printer

1 Answer

ERROR message - CD is dirty or not put in the magazine correctly


hi for starters look carefuly if you are putting the CD's in the right side inside the magazine and the magazine itself in its right position take a air spry can and clean the laser eye of the changer while ur at it clean the whole changer from dust and dirt good luck windman

Jan 01, 2006 | Sony CDX-600DSP CD Changer

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

76682 Answers

Paul Carew

Level 3 Expert

2557 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...