Question about Heating & Cooling
What is E6 fault code in orient air conditioner 04 ton?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
your ac's compraser is getting off due to heat in that area voltage is one of the big issue 2 your thermostat is not working properly of your motor is jammed not rotating properly RPM(running per minute)
Posted on Feb 02, 2010
E-6-Indoor unit heat exchanger sensor [ThIR] defective (resistance is open circuit or closed circuit).
• Poor connection of sensor connector on the indoor PCB.Rectify or replace sensor.
Posted on Jan 05, 2011
E6 Room temperature or evaporator temperature sensor open or short circuit
The prescribed cure:
Check to make sure the room temperature sensor is connected and reads the correct resistance value. If the sensor operates correctly, replace the control board.
This unit most likely employs a NTC thermistor as a thermometer sensor. Common resistance values are 1k ohms and 10k ohms at room temperature. As the temperature goes up, the sensor decreases in resistance.
The sensing element could look like any of the above, but with portable comfort units, they usually look like the bottom row of encapsulated and cabled assemblies.
Posted on Feb 09, 2015
Tips for a great answer:
May 30, 2016 | Heating & Cooling
Apr 03, 2016 | Heating & Cooling
Jan 23, 2016 | Heating & Cooling
Jan 01, 2016 | DeLonghi Heating & Cooling
Nov 25, 2015 | Heating & Cooling
Nov 17, 2015 | Midea Westpointe, 12,000 BTU, Thru The...
Oct 09, 2013 | Comfort-Aire 9,000 BTU Mini Split Air...
Aug 01, 2011 | Mitsubishi Mr. Slim MXZ30TN Air...
45 people viewed this question
Usually answered in minutes!