Question about Galaxy Radio Communications

Open Question

Galaxy 99v2 all dead key , no modulation - Galaxy Radio Communications

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 219 Answers

SOURCE: my galaxy 88hl has no dead key,but swings forward

It could be as simple as you need to turn up your dead key.

Posted on May 04, 2010

Ad
anymhz
  • 500 Answers

SOURCE: galaxy dx 66v off frequency

gal 66 check the 10kHz switch. or you may have a bad cap, or crystal,.. the 33hp2 check the am regulator transistor... is bad or shorted.

Posted on Jan 24, 2011

  • 15667 Answers

SOURCE: Can I install a Texas star 667 to my galaxy 99v2 without turning the modulation down

Modulation is limited in the Galaxy, you cannot over modulate a linear amplifier. There is nothing that you need to adjust except the TS 667 needs a tuning crystal .

Posted on Jan 27, 2016

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I install a Texas star 667 to my galaxy 99v2 without turning the modulation down


Modulation is limited in the Galaxy, you cannot over modulate a linear amplifier. There is nothing that you need to adjust except the TS 667 needs a tuning crystal .

Jan 27, 2016 | Computers & Internet

2 Answers

Need to find 2 or 4 watt dead key and modulation I just purchased this radio and it doesn't have any dead key or modulation


You are basically saying that the radio wont transmit, Does it power on at all? Does it have any sound coming out of the speaker when it is on?

Jul 27, 2015 | Galaxy Radios DX 77HML Base CB Radio

1 Answer

I have a galaxy dx 99v2 18 ft coax hooked directly to ball on my 102 wip and spring ,3ft jumper to swr meater all grounded to battery and power directly to battery tryed to set SWR and pegeing out


first of you have to set the SWR on the radio first . then some liniers require you to run low wattage and others high wattage . the SWR is what you have to control by keeping it low . You must take into consideration the length of the coax plus any jumpers you have . You say you have 18 ft of coax plus a 3 ft. jumper ,thats 21 ft..You should keep that jumper as short as possible ,like 12" . plus you should make sure the antenna is grounded good , like to a good spot under the vehicle . 102 " whips are supposed to be almost perfectly tuned for a good match .

Apr 07, 2015 | Radio Communications

1 Answer

How do you unlock galaxy 99v2


when you got it didn't they include a key in the box? take it to a tech and let him do it.

Nov 09, 2013 | Radio Communications

1 Answer

What is Dead Key on a CB Radio?


Deadkey is slang it is CW or Carrier wave which is RF power produced before modulation/audio is mixed in which stimulates PEP wattage slang being SWING WATTS. A Watt Meter is used to measure it which is often a combination device Wattage/SWR/Modulation meter.

May 08, 2013 | Galaxy Radios DX-949 CB Mob ssb Swr...

1 Answer

Got a connex 3300HP has a ranger board and chipset won't modulate recieves fine keys up relay clicks needle doesn't move no voice either cant find schematics


You may have a dead meter.
Modulation is audio's affect on swing wattage or pep. Notice that needle moving more with your voice.
Dead key or carrier wattage is without your voice enhancing the power only with mic keyed.
I can only assume that the chipset you are referring to is an ic chip audio or pll which must be working if you are receiving audio.
Check your mic cord................ transmit and modulation and even your receive volume can be affected by the cord/mic plug solder joints or broken wires here.
http://www.cbtricks.com/radios/galaxy/dx33hp2/graphics/dx_33hp2_sch.pdf this is a similar radio the General Lee, Connex 3300hp and Galaxy hp2 share boards i believe dont hold me to that thou.


Aug 20, 2011 | Connex 3300 240-Channels Base CB Radio

1 Answer

Galaxy dx 66v off frequency ch18 is ch19 and a galaxy 33hp2 dead key but no modulation


gal 66 check the 10kHz switch. or you may have a bad cap, or crystal,.. the 33hp2 check the am regulator transistor... is bad or shorted.

Jan 22, 2011 | Galaxy Radios DX-66V Base CB Radio

1 Answer

Galaxy 2527 all works except no dead key wattage.


if you are talking on SSB then their is never a dead key wattage.
SSB uses all modulation, no dead key.

Apr 25, 2008 | Magnum OmegaForce S45 CB Radio

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Galaxy Radio Communications Experts

Vernon Taylor

Level 3 Expert

3380 Answers

Brad Brown

Level 3 Expert

15667 Answers

Ngoro
Ngoro

Level 3 Expert

1144 Answers

Are you a Galaxy Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...