Question about Televison & Video

Open Question

Part # is 27.045 circuit board for sharader Kobra 240 ss5

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1218 Answers

SOURCE: Our shredder is a Kobra 240 ss5. It will turn

By now you mave resolved your prob however.... yes you can order replacement PCB's.
The part # is 27.045
Before you just replace the "blown" pcb you should also check the motor; or, when you install the new pcb you will just blow the new pcb also.( if the motor is faulty.)
To check the motor you will need a multi meter.
There are 3 wires...black, red & blue wires. Using black as the common wire measure black to red..this should be approx 6 ohms, the same when you measure black to blue. Between blue and red you should get about 12 ohms. If you get a short on any of these readings then the motor will have to be replaced BEFORE YOU REPLACE THE PCB.
You don't say what country you are in..these readings and the part number are good for the USA &Canada.
The part # will be different if you have the 240 ss5 E/S model.( has a blue light on the panel.)
Hope this helps.

Posted on Jun 20, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My shredder is not shredding.


quite likely the gears have stripped off as most are plastic .

May 18, 2015 | Intimus Kobra 240 S4 Strip Cut Shredder

1 Answer

Our shredder is a Kobra 240 ss5. It will turn backward but not forward. The circuit board has a burn on it. Can I order a new circuit board for it?


By now you mave resolved your prob however.... yes you can order replacement PCB's.
The part # is 27.045
Before you just replace the "blown" pcb you should also check the motor; or, when you install the new pcb you will just blow the new pcb also.( if the motor is faulty.)
To check the motor you will need a multi meter.
There are 3 wires...black, red & blue wires. Using black as the common wire measure black to red..this should be approx 6 ohms, the same when you measure black to blue. Between blue and red you should get about 12 ohms. If you get a short on any of these readings then the motor will have to be replaced BEFORE YOU REPLACE THE PCB.
You don't say what country you are in..these readings and the part number are good for the USA &Canada.
The part # will be different if you have the 240 ss5 E/S model.( has a blue light on the panel.)
Hope this helps.

Apr 05, 2011 | Elcoman 240 SS5 Shredder

1 Answer

Kobra 240SS5 shredder. Reverse but no forward.


Prob;em will either be the "eyes" (try cleaning them) if that dosn't work they may need replacing OR it could be a defective pcb inside.

Nov 19, 2010 | Elcoman Kobra 400WB Shredder

2 Answers

1987 Volvo 240 DL...hard-wiring the brake/tail lights...


Solder to the circuit board, just in case they interact with other circuits.

Aug 03, 2009 | 1991 Volvo 240

1 Answer

CUTTER GEAR BROKEN


This is how a got my hard to fine gear!

Contact Michael Business Machines for your local dealer 1-800-223-2508

Good luck, Tom

Jan 05, 2009 | Dahle Kobra 385SS4 Shredder

2 Answers

Condensing unit won't start


Safety switch or circuit board.

Jun 01, 2008 | Goodman GMS90703BXA Heater

1 Answer

Kobra 240 paper shredder


i had one similar to this i took the cover off and cleaned the sensors in the electronic eyes also there are two relays on the main board that get hung up just tap them. i cleaned real good the machine seemed to work ok after that

Apr 21, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74118 Answers

Cindy Wells

Level 3 Expert

5101 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...