Question about Zebra Z4000 BARCODE LABEL PRINTER, 203DPI SERIAL/PARALLEL

1 Answer

Z-4000, print error unless I continue to push down on print head

How can I adjust the downward pressure on the print head? It seems if I do that it prints fine. I've misplaced the manual for it.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,090 Answers

Look at either end of the printer head rails and you should find a lever with +plus and - minus move lever to + plus till you are happy with the quality

Posted on Jul 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Clarke scrubbers


If you attach a picture of the scrubber, and give the model number, I can help. I retired from repairing these floor machines after 30 years. I like Clarke machines.

Mar 11, 2017 | Clarke Vacuums

1 Answer

Epson 4000


The error relates to a carriage movement error detected by the printer. This means the printer has detected too much power is required ti move the print head. Reason : All these Service Requests (Service Requests 00010004 , 00010005, 00010006, 00010007, 0001000A, 0001000F, 0001001D) are related to a Carriage movement error that is not automatically due to a Hardware fault. The reasons can be : - The carriage is lock not completely released. - The carriage lock has been partially pushed in after a paper jam or maintenance (for example). Reminder : The carriage lock must be released after unpacking the printer (see setup instructions) as follow : Points to check : In case such an error appears: - Power off the printer. - Ensure the Carriage lock is released (pulled to the left side) - Pushing down the cutter blade, slide the carriage to the left ? At the same time, please check if there is any foreign materials / dust / paper jam in the carriage path. If so, remove them. - Also, make sure that the carriage encoder (T-Fence) isn?t dirty and is correctly set and centered. Let me know how you get on with this info.

Aug 17, 2007 | Epson Stylus Pro 4000-PS InkJet Printer

1 Answer

I have a Canon ipf 700 and am getting a code: 03800500-2F2F hardware error. Could someone please help me. Thank you.


03800500-2F2F Head management sensor error

The head management sensor detected an ink discharge error. A sensor sensitivity error was detected during head management sensor position adjustment.

Print head, head management sensor, or main controller PCB

1) Start by replacing the print head.
2) Visual check for any foreign substances around the head management sensor.
3) Replace the head management sensor.
4) If continuity of the cable between the head management sensor and the main controller PCB is abnormal, replace the cable.
5) Replace the main controller PCB.

Jul 05, 2010 | Office Equipment & Supplies

1 Answer

Lid at printing end does not seem to fit rite....must press down on right side to restore printing. As long as you retain the pressure, it continues printing.


Do you mean that you need to retain the pressure to have good print quality on the right side or you need the pressure to keep the amber status light from showing ?

There is a small optic sensor that functions to indicate if the lid is open or not. The printer will not print as long as it thinks the lid is open. If the lid won't snap down tight enough you can fool the printer by placing a small piece of label or something opaque over the sensor to make it think the lid is closed. The sensor is located on the right side just behind the green adjusting wheel used to adjust the label width guides.

Hope that helps...

Apr 15, 2010 | Zebra Eltron LP 2824 Thermal Printer

1 Answer

Can't get thespool off the head of echo 210


Nothing is wrong if it is just the head spinning. The idle is adjusted too high. Simply adjust the idle down and it should settle down for you.

The idle screw is usually large and will be located on the carburetor. Turn counter clock-wise to adjust downward.

If you need further assistance, let me know.

Jim

Oct 19, 2009 | Echo Garden

1 Answer

Printer-Genicom 2280+ Printer stopped then continued working, often on LCD Hardware error. When turn on printer- on LCD AGA Error.


The AGA Error on the 2280+ indicates the Automatic Gap adjust is not working.
This may be caused buy;
An obstruction (eg paper jam, ribbon etc) preventing the AGA from working correctly.
The AGA flag becoming detached from the printer or damaged
An incorrectly fitted print head
Fault AGA sensor.

You can overcome the AGA error by disabling the AGA and manually setting the print had gap.

To disable the AGA

Power the pritner on holding down ONLINE, keep ONLINE held down whilst the printer initializes.
When the printer displays ASCII80 ASCII136 release ONLINE
Press NEXT until you see AGA
Select AGA and set this to OFF

You can then manually adjust the print head gap in the normal menu.

Menu>Adjust>Head change the value to increase or decrease the head gap as required.

Jul 21, 2009 | Tally Matrix T2280 Printer

2 Answers

Ribbon wrinkle


Its a bit of both. Too much pressure on the printhead can cause this as well as a poorly aligned ribbon. Adjust both then adjust the darkness the same as you would position or calibration

Jul 09, 2009 | Zebra 105Se Thermal Printer

2 Answers

Continually says align print cartridges


My guess is that the color cartridge is either defective or not inserted correctly. I have a 6110 and know that inserting a print cartridge is a little tricky. If it isn't completely inserted and the top latch fastened correctly, the cartridge either won't work or produce errors.

Try reseating the color cartridge so it's inserted in exactly the same way as the black cartridge and run a print job again.

Open the following web page and go to Step three to see the instructions for cleaning the electronic contacts on the cartridge and print carriage.

Ink Cartridge Alignment Fails

Those seem the most likely causes and solutions to me. Good luck.

Oct 29, 2008 | HP OfficeJet 6110 All-In-One InkJet...

1 Answer

Canon ip4000 flashing 12 times


For 11 orange flashes (Canon doesn't list 12) Canon says its an automatic print head alignment error: -make sure ink tanks are snapped in correctly http://www.usa.canon.com/consumer/controller?act=SuprtKnowledgeBaseAct&fcategoryid=184&modelid=10438 -place 8.5 x 11 paper in the automatic sheet feeder, anything smaller will cause this error. -Remove the printer from strong light; apparently a sensor in the paper output slot can be affected. -Also you said you replaced all the cartridges with new ones, were the new from HP? If not I would definitely try replacing them all.

Jul 21, 2007 | Canon PIXMA iP4000R InkJet Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zebra Office Equipment & Supplies Experts

pkwc

Level 2 Expert

254 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you a Zebra Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...