Question about Televison & Video

1 Answer

Have visio 70 in tv .heard load pop .when in to tv it was off .will not turn on

No lights .no sound. no led lights .no on light . completely dead.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Televison & ... Master
  • 74,459 Answers

The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Posted on May 02, 2017

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Visio 1080p screen went light


Our Visio 42" flat screen TV did the same thing. It didn't happen that often but sometimes it would go darker or the sound would go off until I changed the channel or turned TV Off then back On. I contacted Visio through my warranty and they sent me a flash drive to install info on my TV. Did not fix the problems. A year later before warranty ended I contacted Visio again. They sent a huge box for me to pack my TV in to send to the warehouse where they fix everything. It took about 2 wks. to get it back. Worked fine for about 4 months and the problems continued. I will not buy another Visio TV. I found out that they had many problems with several models.

May 03, 2014 | Televison & Video

1 Answer

Visio model sv320svt will not turn on....visio logo in front flashes on and off..what could it be?


Hi after the logo flashes does it turn off completly or do you see the power light still on or any other lights?

Jun 02, 2011 | Vizio SV320XVT 32 in. TV

1 Answer

I have a Sony 50" WEGA rear projection tv. Last night it made a popping sound and then the screen went black. I could still hear audio at that time. I turned the tv off and now there is a blinking red...


It sounds lamp in tv got broken as you heard pop sound of it, replace lamp in tv to fix the issue.
Blinking light would be Lamp light at tv front that shows lamp is dead.
Lamp replacement procedure is easy and mentioned in tv user manual.
Thanks.

Sep 13, 2010 | Televison & Video

1 Answer

Power light stays red and nothing comes on on my RCA L37WD12 Flat Screen what is the problem? I guess it's getting power because of the red power light, but TV is not turning on! Please HELP


I just had my Vizio which blew up and the power light stayed on and you could not turn it off on the tv you had to unplug it and then when you plug it back in same thing all over again, no picture at all , My TV made a loud pop before this happened, paid 1700 for TV and repairs were 900, bought new TV instead, never buy a Visio, there customer service totally sucks, you get a warranty and they try to screw you with an old piece of junk refurbished TV, they tried anyway, after 2 months they finally gave me my money back and I bought a totally awesome, SAMSUMG, THE WAY TO GO!! It sounds like the same deal and if it is a Visio just do a google search and see how many people it has happened to that own a visio..steve

Jun 13, 2009 | RCA L37WD12 37 in. LCD HDTV

2 Answers

Sony KV32s45 sudden failure


heard a pop sound -- then the set went dead -- no lights, no nothing, and then there was a slight electrical burn smell coming from the back of the set :(

It's an old 32" set

Nov 19, 2007 | Sony KV-32S45 32" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...