Question about Cell Phones

2 Answers

You asked for my Radio Shack Phone serial number on the back. The problem is now how to empty the caller id box so it will take voice messages that come in while we are on the phone. The box is full atCID 100 messages. Can you help me empty the box. Theserial number is: CAT 43-143 04A07 74010106

Posted by on

  • Barry Green Jul 25, 2009

    I already said the phone is a RADIO SHACK k2 line Digital Answering machine that has 10 expandable remote units I only have two however. the CID has 100 messages..obviously full and it will not allow for voice mail messages when we are on the line. HOW DO I EMPTY THIS CID BOX SO THE PHONE WILL WORK PROPERLY!????

  • Barry Green Jul 25, 2009

    Dear Jenny:
    I have deleted voice mail messages that are in my voice mail box..no problem. the problem is with the CID 100 messages. I was told by one of your techi's that since it shows 100 or 99 CID messages that this is blocking new voice mail messages that come in WHILE WE ARE ON THE PHONE....Several people have told us they have left messages and we haven't received them and we assume when there is a call waiting signal on the phone, that it is going direct to voice mail. However, no new voice mail messages have shown up. One of your Fixya people said that is because our CID is full with 100 messages....Can't you tell us how to get rid of these 100 CID messages first. Maybe this will solve the problem..maybe not...but obviously that elment is full.

    BG


×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,037 Answers

I'm sorry, the name and model number of the phone would be better so that I can tell you how to empty your messages.



Benjamin

Posted on Jul 25, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 336 Answers

Hi there,

We could help you more if you will give us the exact model number of your answering machine. I searched for K2 model and i don't seems to find that model.

For the mean time, please try below steps to erase messages in your machine.

DELETING MESSAGES
You can delete messages individually during playback, or all at once after playback.

To delete a particular incoming message, memo, or two-way phone conversation (after listening to it), press DELETE during
playback.

To delete all messages after playback, hold down DELETE. The system sounds a tone.

Note: If you press DELETE before playback of all messages, the system sounds tones to alert you. You cannot delete all
messages until you playback all new messages

Regards,
Jeep Brainy

Posted on Jul 25, 2009

  • jessy Jul 26, 2009

    Hi there,



    Please check you phone if there is an button which can be slided to choose between "INCOMING MESSAGE" and "ANN ONLY". If there is, slide to button to select INCOMING MESSAGE. After that, you should now able yo receive messages.



    Regards,

    Jeep Brainy

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panasonic voice mail works fine except when our line is busy callers get the busy signal and are unable to leave a voice message


Yes - Afraid that is the case, certainly in the uk.
Phone will only accept a message if phone is not in use / not answered.
You do get notified that there is a call waiting so you can either switch to their call and ask them to call back.
Or when you have finished call - their number will show as last caller and you can call them back.

Nov 02, 2016 | Panasonic Lands Phones

1 Answer

I have caller id service with my phone company; Why does my Radio Shack heavy duty wall phone with caller id display all rows of 8's in the caller id area?


It's radio shack... kidding, depending upon the age of it, the lcd black/grey display may have gone bad... from dropping or age or defect.

Feb 12, 2015 | Radio Shack Lands Phones

1 Answer

I just bought a Radio Shack 43-3829 telephone answering machine. What does a caller need to do to send a message to a specific mail box? Right now all messages are going to the general mail box.


To put the message in a specific mail box, the caller needs to press *1, *2 or *3 (touch tone phone) before leaving their message. (Of course the answering system has to pick up before the key stroke.) Obviously the number corresponds to the mail box that will get the message.

So if you want to include these directions in your outgoing message, you would need to add something like "To leave a message for John press Star 1, for Sam press Star 2" when you record the ogm.

The manual for the answering system is available from Radio Shack. See http://www.radioshack.com/product/index.jsp?productId=2257360#tabsetBasic . The direct link to the English version of the manual is http://www.radioshack.com/graphics/uc/rsk/Support/ProductManuals/4303829_PM_EN.pdf .

I hope this helps.

Cindy Wells

Aug 11, 2011 | Radio Shack (43-3829) Digital Answering...

2 Answers

I am having a problem with my Panasonic KX-TG6442t. It won't store phone numbers and is not show numbers on the display when the calls come in. It just says incoming call. When I go into look at the...


Welcome to Fixya

Try to erase your phone's voice messages. Press ERASE 2 times while the phone is not in use. Caller ID is being activated by your phone provider. To use Caller ID features, you must subscribe to a Caller ID service. Contact your service provider/telephone company for details.

Thank you for using Fixya!

Jul 12, 2011 | Panasonic KX-TG6442T 1.9 GHz Twin 1-Line...

1 Answer

How do I make the phone ring/ Also how do I delete number's/


Activating Personal Ring
You can assign special ringer tones to anyone in your phonebook. When your phone gets a call, it looks up the Caller ID information in your phonebook. If you've assigned a personal ringer to that number, the phone uses it so you know who is calling. To turn the personal ringing on or off, follow these steps:
  1. Press [Menu/Select]. Select the HANDSET SETUP menu, and then the PERSONAL RING submenu.
  2. Move the cursor to select ON or OFF.
  3. Press [Menu/Select]. You will hear a confirmation tone.
Selecting a Ring Tone (Handset only)
You may choose from four melodies or three tones for your phone's primary ring tone. Each handset can use a different ring tone or melody. The available ring tones are as listed:
  1. Press [Menu/Select]. Select the HANDSET SETUP menu, and then the RINGER TONES submenu.
  2. Move the cursor to select a ring tone. As each ring tone is highlighted, you will hear a sample.
  3. When you hear the tone you want to use, press [Menu/Select]. You will hear a confirmation tone.
Adjusting the Speaker Volume
Handset Speakerphone: You can choose from six volume levels for the handset speakerphone. To adjust the speaker volume while on a speakerphone call, press the UP Arrow button (to make it louder) or the Down Arrow button (to make it softer).
Base Speaker: You can choose from ten volume levels for the base speaker. To adjust the speaker volume while call screening or playing messages, press [volume +] (to make it louder) or [volume -] (to make it softer).

Adjusting the Audio Tone
If you aren't satisfied with the audio quality of your phone, you can adjust the Audio Tone of the earpiece while on a call. Your phone gives you three audio tone options: low, natural and high; the default setting, Natural Tone, is recommended for hearing aid users. Audio tone adjustments only apply to the earpiece, not the speakerphone.
To adjust the audio tone:
  1. While on a call, press [Menu/Select].
  2. Move the cursor to select AUDIO TONE, and then press [Menu/Select].
  3. Move the cursor to select desired option (HIGH TONE, NATURAL TONE, or LOW TONE), and then press [Menu/Select]. Selected option appears in the display for two seconds, and then the display returns to normal.
Deleting Phonebook Entries
You can delete a single phonebook entry at a time or all phonebook entries at once:
To delete a single phonebook entry:
  1. When the phone is in standby, press the phonebook key.
  2. Find the entry that you want to delete and press [Menu/Select].
  3. Select DELETE. DELETE ENTRY? appears in the display.
  4. Move the cursor to select YES.
  5. Press [Menu/Select]. You will hear a confirmation tone, and DELETED! appears in the display.
Deleting Caller ID Numbers
  1. To delete only one Caller ID number, press the Caller ID button when the phone is in standby, and then find the number you want to delete.
  2. Press [Menu/Select] and select DELETE ENTRY.
  3. When the phone asks you to confirm, select YES.
  1. To delete all the Caller ID numbers, press the Caller ID button when the phone is in standby, and then press [Menu/Select].
  2. When the phone asks you to confirm, select YES.
Note: When you delete a Caller ID number, you delete it permanently.

Deleting a Redial Record
If you want to delete a phone number from the handset's redial list, follow the steps below:
  1. When the phone is in standby, press [Redial/Pause].
  2. Use the UP Arrow button and the Down Arrow button to scroll through the redial list.
  3. When you find the redial number you want to delete, press [Menu/Select] and select DELETE ENTRY.
  4. When the phone asks you to confirm, select YES. The redial number is deleted.
Resetting the Voice Message Waiting Indicator
  1. When you receive a new voice mail message, the new message LED on the top of the handset flashes and VM appears in the handset display.
  2. In the event your message alert tone gets out of sync with your phone company's voice messaging system, you can reset back to its original "no messages waiting" state.
  3. To reset, press and hold [find hs] on the base for five seconds.
  4. A beep sounds and the message alert tone is reset.

Mar 22, 2011 | Uniden DECT 2080-5 Quint Phone

1 Answer

Callers cannot leave a message when I am on the phone.


caller id does not work when you are on the phone. You have to have teh line open, caller ID is only one line and only allows you to switch back and forth, the answering machine is not hearing teh call only you are.

May 05, 2010 | Lands Phones

1 Answer

Lucent Partner 18D - Caller ID not working


The caller id information is sent from your local telco provider after the first ring and might not be able to be extended to the individual sets, try backing off the ring to answer on your voice mail from 2 to 3 rings to see if the information is then passed on. The Voice Messaging System message is being sent from the system showing who transfered the call to you. You should also notice that the ring pattern when that message is displayed is a standard ring followed by a beep meaning a transfer is taking place.

Nov 20, 2009 | Lucent PARTNER18 Corded Phone

1 Answer

UNIDEN TRU8888-CALLER ID DOES NOT WORK


Hi

Thanks for using FixYa. I think you have stored more than 100 Caller ID messages and hence the caller ID is not showing on Uniden Tru8888. In the following cases the caller ID will not be shown-

If you answer a call before the Caller ID message is received (for example, before the second ring), the Caller ID message will not appear.

When the call is received via a telephone company that does not offer Caller ID service, the caller’s phone number and name does not appear. (This includes some international calls.)

When the call is via a private branch exchange (PBX), the caller's phone number and name may not appear.

You may receive any one of the following messages:

When a private name is received; Private Name
When a private number is received; Private Number
When a unknown name is received; Unknown Name
When a unknown number is received; Unknown Number
When invalid data is received; Incomplete Data

The Caller ID list stores information for incoming calls - even unanswered calls. You can store up to 100 Caller ID messages and phonebook entries (including Speed Dials) for each handset and the base. You can view the Caller ID list through the handset or base during a call or when the phone is in standby mode.

Memory locations for Caller ID messages and Phonebook entries (including Speed Dials) are common, you can store up to all 100 entries for each handset and the base. Caller ID messages are not stored when you have 100 phonebook entries. When you have stored a total of 100 phonebook entries and Caller ID messages, the oldest Caller ID message is overwritten.

Please do rate the solution and revert for further assistance.


Thanks
Rylee

Aug 16, 2009 | Uniden Cordless Phone

1 Answer

Caller id dont work


just connect one end of the phone plug to the id caller,then connect the outlet of the caller id and fix it to phone...........even then if u hav problem, may be ur caller id doesn.t hav batteries..............otherwise u may hav some problem in the id caller socket where phone plugs r inserted................

Sep 08, 2008 | Radio Shack 433575 Cordless Phone

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

yadayada
yadayada

Level 3 Expert

76682 Answers

William Alequin

Level 3 Expert

928 Answers

Are you a Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...