Very bad fixya - FixYa Computers & Internet

This model is known for having shorted transisotrs, bad fuse, poor solder joints, bad caps. You need to open it up, worst case will be bad lamp assemblies. See my pictures here:
http://s807.photobucket.com/albums/yy352/budm/DELL/Dell%20E173FPb/

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

This can be due to bad power supply DC filter caps.
Bad backlights inverter circuits, worst case will be bad lamp assemblies.
Please read my guide first before DIY repair.
Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Parts: www.interliquidparts.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series

cmurray12,

You do not have a bad fan, you have a bad optical disc drive. See my tip at http://www.fixya.com/support/r4160054-replace_color_wheel_in_dlp_projection_tv for the replacement procedure and where to get the parts.

Thanks for using FixYa and for the great rating.

hardrocko

It may have bad EEPROM or unstable 5vdc feeding the logic board, look inside for bad caps and check the 5vdc, similar to this: http://s807.photobucket.com/albums/yy352/budm/Viewsonic%20VX710_910/

http://www.fixya.com/support/r4554177-viewsonic_monitor_lock_unlock

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

Hi and welcome to FixYa!

The wheel bearing is a wear and tear thing so it tends to go bad due to old age. If the vehicle is dip prolonged on flood it can go bad. If the wheels are not aligned or has wiggle it can go bad too.

Hope this helps and thank you for using FixYa! Have a good one!

Welcome to FixYa.com
You will need to find which door jam switch is bad. This is the switch you see when door is open.
Thank you for Using FixYa.com Kind Regards, Lee Your FixYa Expert and Master Technician

Hello,

Welcome to FixYa.

Can you provide the make of washer you have and if possible the model number would be beneficial.

Most problems as you described are related to lid switches, but that may not apply to yours, hence the need for a make and model.

Thanks for choosing FixYa, I`ll watch for your reply.

Regards,

Macmarkus :)