Question about Echo Garden

1 Answer

Echo SRM225 line trimmer continually feeds line

I recently replaced the shield on my trimmer. Very straight forward. Now, when I operate the trimmer, the line continuously feeds, the knife does not cut the line. This is without bumping the head.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

  • Expert
  • 183 Answers

If the line feeds with out bumping it nay be the line gas been put on the wrong way

Posted on May 22, 2017

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you remove the spool on an echo srm-2100 trimmer


Most units like yours has a tap head feed spool. To get to the line spool, you need to push the spool inward and rotate it to release it. The line spool is spring loaded, hence the need to push it in and rotate it to get it to release. You return the spool to the trimmer head housing after loading new line on it the same way, in reverse. Hope this info helps.

Sep 17, 2015 | Echo Garden

1 Answer

Echo srm225 grass trimmer will not start


Search Results

    Echo String Timmer/Weed Eater Model SRM-225 Won't ...

    ? 2:50
    www.youtube.com/watch?v=uFN82KDj3a8
    Nov 1, 2013 - Uploaded by mountainbikekayak So this is Part I of showing it want start but adding prime it wants to. Part II will show replacing the fuel filter did not fix it and then replacing the ...

Sep 16, 2015 | Echo Garden

1 Answer

How to adjust carb on srm225 echo carb


Initial carb adjustment is 1 full turn out on both low and high side. if it falls on its face, then turn the low side out and additional 1/4" turn.

Sep 27, 2014 | Garden

1 Answer

Echo SRM 200 series trimmer is great. I noticed though this summer once I reel in the new string, a short time of trimming later, only 1 side of the string appears. When I open up the reel, the string is...


For your machine, make sure you are using the Manufacturer's recommended trimmer line. For your model, they recommend using Echo brand .080" Cross Fire diameter line. You also need to insure that when you load the spool with the line, that it is loaded (in the right direction) so it can feed properly.

Jul 02, 2011 | Echo Rapid Loader, Trimmer Head

1 Answer

Echo trimmer with bump feed is not feeding


Sadly, they do wear out..... but sometimes they're just stuck. The line can refuse to feed if the line is caught on itself in the spool winding, or if the head is bad. Try this: remove the spool and clean it pretty good. Check that the line isn't caught on itself in the spool. Sometimes it just locks itself in between wraps, and you have to pull it out of the groove to get it to continue to feed. Give the inside of the spool a liberal dose of graphite powder. Put the spool back on with line. Bump it against the ground as much as you feel necessary to further distribute the graphite. Now, push the spool in as if to feed line, and pull on the line. It should feed a bit and stop. If it does, you're good to go. If not, replace the spool.
Best regards. Hope this was helpful to you, --W/D-- Please feel free to rate this solution! Thanx!

Jul 30, 2009 | Echo Garden

1 Answer

Don't know how to install new string on Echo SRM 2400


Cut two separate pieces of string, about 7 ft. each.

Stick the end of the line in the hole on the inside of spool.

Wind clockwise onto spool, putting the line that is closest to the ground on first.

Once you have winded this piece on, lock the last 4 inches of line through the slits on spool.

Repeat process for second piece of line, locking the last 4 inches in slot opposite the other locked in piece.

Put the spool on the trimmer, feeding the end of lines through either hole on trimmer.

Before you push the spool all the way on, pull the strings out of the locked position.

Jim

Jun 29, 2009 | Echo Rapid Loader, Trimmer Head

1 Answer

String continuously feeds and cuts


sounds like something is out of place. try again.

Jun 23, 2009 | Black & Decker String Trimmer Cordless 12"...

1 Answer

Change feed fuel feed line craftsman string trimmer


no should be fairly straight forward! you can find the tubing at ace lowes home depot! good luck & happy trimming!!

May 31, 2009 | Craftsman 25cc Gas Line Trimmer

Not finding what you are looking for?
Garden Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Echo Garden Experts

Jim London
Jim London

Level 2 Expert

257 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

colesmowers

Level 2 Expert

38 Answers

Are you an Echo Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...