Question about Hitachi Televison & Video

1 Answer

Hi, I have a Hitachi LE49A6R9 and there is no picture but I can here the sound just fine. If I hold a flashlight to the front of the screen I can see the images on the tv. Any ideas? Thank you, Mike

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Hitachi Master
  • 12,876 Answers

Your inverter board, the one that powers the leds, is bogus and needs replacement.
TV Parts Universal TV Stands DLP Chips ShopJimmy

Posted on Apr 30, 2017

  • 2 more comments 
  • Mike Ciaramitaro May 01, 2017

    Hi Richie, any ideas where I can find that part? Thanks, Mike

  • richie46 May 01, 2017

    If you have the board part number you can look for it on ebay or go to shopjimmy.com site. Read that this tv suffers often from led strip failure.http://www.ebay.com/itm/Hitachi-LB55061-...

  • Mike Ciaramitaro May 01, 2017

    Is there a way to test the board before buying a new or used one? And I guess the same for the led strips. Thanks again

  • richie46 May 01, 2017

    Nowadays, repair is a lost art given all of the complicated electronics and un solderable parts. What they do nowadays is identify the possible bad board, replace it, cross their nutsacks, and hope that does it! And they charge a fortune for non existent labor on top of the part expense.
    That set has on going issues with the led strips responsible for lighting up the screen. So the issue has to be either with the led strips or the electronics that power the strip. U will have to do some research on google and see if that set has a separate inverter board to power the leds. Sometimes the inverter circuits are part of another board. If it were my set and I really did wanted to get it going again, I would get the best prices for the strips and electronics, and maybe go with the cheaper of the two first, and then go for the second route if plan A does not work.
    Your third alternative is to walk away and replace the set with a newer model that comes with a warranty. The TCL sets are very good sets at really good prices with built in Roku & 4K (not that you will see it since you have to be an alien or have a screen of at least 100 inches in diameter to see the difference in a pu-ic hair!) When you purchase audio/video gear, if you cannot hear or see the difference it is stoopid to pay extra.

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Sunia LTD-1510 TV/DVD-problem w/ TV signal and sound

Do you have a schematic diagram of TV mine is broken as well

I have two of them

Tracy
tracyjeffords@sbcglobal.net

Posted on Apr 02, 2009

  • 1039 Answers

SOURCE: No sound on 50 inch hitachi tv

Have you checked other inputs with a known good program source? Mute button on remote?

Posted on Apr 27, 2009

  • 21 Answers

SOURCE: we just set up our 37 in sharp and get no picture

I had this problem on my 42" Philips. Just got it yesterday and worked fine on the tv stand. As soon as I mounted the TV to the wall via wall mount system, I had the exact same issue you did. Figured it out today.

The wall mount was putting pressure against the center of the back of the tv (tv set had a slightly rounded back plate, and the mount was a flat plate). As soon as I put spacers (part of the wall mount hardware set) between the wall mount braket and the tv so there was no contact except at the mounting holes, the tv worked fine.

My theory is the pressure pushed the tv back plate against some board components which caused them to overheat (no air flow); or put pressure on internal connectors. I dont know.

Hope this helps, may not apply to your situation.

Posted on Sep 18, 2009

  • 1779 Answers

SOURCE: 47inch toshiba lcd tv (HL167) black picture, but

Best to replace both at the same time . Yes they are easy if you can find the parts.

Posted on Dec 15, 2009

  • 1 Answer

SOURCE: Hitachi tv no picture or sound.

my hitachi projection tv 53uwx10b screen is black with no sound or picture when the power button is on

Posted on Dec 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sound but no image on Hitachi 42pd5000


Two things need to be checked. The ballast board and the T-con board. Shine a flashlight on the screen with the TV on...If you see a faint picture moving, then the T-Con board is OK. The ballast board for the white backlight is bad. If you don't see a faint picture, then the T-con board is bad. You can get parts here: www.shopjimmy.com TV Parts Universal TV Stands DLP Chips ShopJimmy

May 23, 2017 | Hitachi Televison & Video

1 Answer

Hitachi led tv no picture but has sound


hi, the led or leds in the panel may shorted, thanks

shaun

Feb 12, 2017 | Hitachi Televison & Video

2 Answers

Our Hitachi tv turns on okay but the picture on comes in for 2-3 seconds and then the screen goes black. Last night the tv work just fine but this problem started today as I turned the tv on to watch...


I don't know what model you have,but... I have a 50v715 and it was doing the same thing and it turned out to be the lamp. So if you have not replaced the lamp in a while then it could just be it time. Hope this is helpful.

Oct 03, 2009 | Hitachi Televison & Video

1 Answer

Blank screen beko lcd 26" lcd tv - sound ok (model no. L5A)


While you have sound, take a flashlight and shine it on the screen, look very close and see if you can see a dark video image.
Let me know what you see.
lone99star

Jan 08, 2009 | Hitachi 50V500 50 in. HD-Ready LCD...

1 Answer

Black screen no picture got sound


if its an LCD check by holding a flashlight to the screen looking for the pic. if u see the pic the backlight/inverter has failed.

Dec 06, 2008 | Televison & Video

2 Answers

Hitachi tv no picture


It sounds like the tuner demodulator has failed. Many times I have found that it is cheaper to buy an external hi-def tuner than repair the one that is in the set. The fact that the tuner is finding channels but not displaying them is a good sign that the demodulator has failed. In one case I had with Sony rear projector, it would have been $800 to repair the internal hi-def tuner and the customer can buy an external tuner for $100-$200. Sorry if this is not the answer you wanted; if you fel this si a good response to your question, please be sure to rate me,. Thanks!

Oct 22, 2008 | Hitachi 26LD6600 26 in. HD-Ready LCD...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2318 Answers

The Knight
The Knight

Level 3 Expert

74118 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...