Question about Bosch Saws
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Here you go.
This is the ls1040
This is the ls1040f
Posted on Mar 12, 2009
SOURCE: I have a 12
The commutator is dirty. Take a light grade sand paper and slip it in the opening and turn the motor by hand while you clean the comm with the paper. Fold the sand paper or put it on a stick so you can make contact to clean the comm.
Posted on Jun 26, 2009
SOURCE: change blade miter saw
Un-plug the saw. Remove the screws holding the side saw guard in place. Look at the center of the saw blade for the nut holding it in place. Take a socket wrench that fits the nut and loosen it. You'll need to take a scrap piece of wood 2x4, and jamb the teeth of the blade into it while loosening the nut. The nut will come off first and then a washer/spacer.
Reverse the order for installing the new blade. Make sure you use the proper size diameter blade (10 inch) and mounting hole in the replacement blade. Also, use the provided washer/spacers that were on the original blade and secure the nut. Spin by hand to see if everything clears. Mount the protective guard back on. Plug in the saw and test cut .
Good luck. If you are still unsure - ask a handy neighbor to help. It takes about 5 minutes to complete this task.
Posted on Oct 05, 2009
Tips for a great answer:
Dec 29, 2013 | Makita Tools 12" Compound Miter Saw -...
Jan 16, 2013 | Makita 10" Dual Bevel Sliding Compound...
Jun 21, 2010 | Bosch 12" Compound Miter Saw 3912
Nov 17, 2009 | Bosch 12" Dual - Bevel Compound Miter Saw...
Jul 03, 2009 | Bosch 12" Dual - Bevel Compound Miter Saw...
Jan 13, 2008 | Bosch 12" Dual - Bevel Compound Miter Saw...
74 people viewed this question
Usually answered in minutes!