Question about Kenmore Washing Machines
There was a power outage while the machine was running.. I now have a load that needs to be taken out. We get no response at all from the machine. I fear that the circuit board is toast.
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
hi thanks for the question. i think the problem is with the lid switch . lifting the lid 10 times wont help if the switch is faulty check the lid switch thanks the appliance doc
Posted on Sep 28, 2008
SOURCE: need a diagram for a lid switch
What is the exact model # ?
This was the part number!!
You said, you need a diagram of the Kenmore top loading washer, model 20432 lid switch.
This is a Kenmore part # you supplied, so here is where you can get it from Kenmore.
Part # 20432 lid switch as you supplied in our communications!.
Thank you for using Fixya.
Please remember to leave a rating
Posted on Oct 08, 2008
THERE IS TWO SCREWS IN THE REAR OF THE TOP YOU HAVE IN THE PICTURE HERE REMOVE THOSE TWO SCREWS PULL CONTROL PANEL TOWARDS YOU AND PULL UP THERE ARE TWO METAL STRAPS ON EACH SIDE TAKE A SCREWDRIVER AND POP THESE OUT THERE IS A PLUG FOR THE LID SWITCH BEHIND THE CONTROL PANEL UNPLUG IT NOW PULL THE CABINET TOWARDS YOU AND IT WILL COME OFF! FLIP THE CABINET OVER AND YOU WILL FIND THE LID SWITCH
Posted on Apr 29, 2009
yes!! the F/11 is triggered under high voltage conditions like high speed spinning. The part is called the MCU motor control unit. if it goes into failure while using your machine and locks the door, just wait 3 minutes and the door will unlock after the MCU resets. Try using you machine with a low speed spin for awhile.
Posted on Jan 19, 2010
that is very possible.the best thing to do is replace the lid or sand all the rust off and you some rust inhibitive paint to helpslow or stop the rusting proccess.
Posted on Jan 23, 2010
Tips for a great answer:
Mar 26, 2017 | Kenmore Washing Machines
Jul 23, 2014 | Kenmore Washing Machines
Feb 19, 2013 | Kenmore Washing Machines
Jan 06, 2010 | Kenmore 24032\24036 Top Load Washer
Nov 30, 2009 | Kenmore 24032\24036 Top Load Washer
Oct 26, 2009 | Kenmore Washing Machines
Sep 20, 2009 | Kenmore Elite 21086
Jun 28, 2009 | Kenmore Elite Oasis 27052 Top Load Washer
113 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: