Action button for Panasonic remote eur7662y30

Remote Control Codes For Stereo Audio Receivers Codes For Universal Remotes

1. Hold down both the "Action" and "Power" buttons on the remote at the same time for at least five seconds. ...
2. Push the button of the component you want to program to the remote control. ...
3. Continue to the link in the Resources section to find the correct three-digit code for the component you are programing to the remote.

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.........
http://electro-medical.blogspot.com/

You want the codes for Panasonic, I assumes and posts this solution. Three digit codes for Panasonic TVs are: 003/ 054/ 055/ 062/ 070/ 148/ 149/ 170/ 171

Visit this site for more details. Type in the site name "Electro-help" either Google or Yahoo search box [not in the address bar of your browser], and click search. It is an electronic equipments service help site. All details you want are there. Note the position of hyphen in between words in site name, when you type it in. The site will appear as it is in web; subtitled as service help to electronic home entertainement equipments.
Pull up older posts. You can get all details.

Howdy,
Doble check your Lamp Installation, making sure that the Lamp Cover is properly secured. Reset TV by unplugging TV from the wall for 3-4 minutes then plug back in, then turn TV on.

To reset your Panasonic Lamp Time:
ø Press and hold these buttons for (at least) 5 seconds:
ø Volume Down button (on TV Panel).
ø AND ACTION Button (on remote).

As the remote gets older the ACTION button may not respond unless you press the button dead center and not at an angle.

Thanks for using FIXYA, BIG IRISH.

Howdy,
The Lamp is located on the right hand side of your TV.
To reset your Panasonic Lamp Time:
ø Press and hold these buttons for (at least) 5 seconds:
ø Volume Down button (on TV Panel).
ø AND ACTION Button (on remote).

As the remote gets older the ACTION button may not respond unless you press the button dead center and not at an angle.

Thanks for using FIXYA, BIG IRISH.

Howdy,
To reset your Panasonic Lamp Time:
ø Press and hold these buttons for (at least) 5 seconds:
ø Volume Down button (on TV Panel).
ø AND ACTION Button (on remote).

As the remote gets older the ACTION button may not respond unless you press the button dead center and not at an angle.

Thanks for using FIXYA, BIG IRISH.

Howdy,
To reset your Panasonic Lamp Time:
ø Press and hold these buttons for (at least) 5 seconds:
ø Volume Down button (on TV Panel).
ø AND ACTION Button (on remote).

As the remote gets older the ACTION button may not respond unless you press the button dead center and not at an angle.

Thanks for using FIXYA, BIG IRISH.

Howdy,
To reset your Panasonic Lamp Time:
ø Press and hold these buttons for (at least) 5 seconds:
ø Volume Down button (on TV Panel).
ø AND ACTION Button (on remote).

As the remote gets older the ACTION button may not respond unless you press the button dead center and not at an angle.

Thanks for using FIXYA, BIG IRISH.

To turn off the "stuck" pip on a Panasonic tv without a remote, turn off the tv. Then hold down the "Action" button on the front of the tv and press the power button. This will activate a reset and self check of the systems and voila! The pesky pip screen will be gone! This is on an approximately 10 year old regular crt "CT-xxxxx" series tv.

To turn off the "stuck" pip on a Panasonic tv without a remote:
1) Turn off the tv.
2) Then hold down the "Action" button on the front of the tv and press the power button.
2-b) Continue to hold down the Action until the tv powers all the way up, and the reset menu comes up - be patient.
Expected Reslut: Self check menu should appear.
Expected Reslut: The pesky pip screen will be gone!
If the self check menu does not appear, you did not hold the Action button long enough.
Simply begin from step one.

Thanks to Imhiro