Question about Samsung Office Equipment & Supplies
My Samsung CLP-610 printer has a message of system initialize in the message screen. I have restarted the printer and it says that it is printing but does not. Then the system initialize message comes back up. Is there a fix? I know the fuser needs to be replaced soon - will replacing that now help?
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The part number you need is JC96-03239C-N
You may order it through this website; you'll need to call them for pricing information. They are a reputable company that I use to obtain parts.
Thanks and please give this solution a thumbs up rating, solving your problem.
Posted on Apr 26, 2009
"MP tray" refers to the manual paper tray. This is the common setting for most word processors whenever printing media other than paper. This message will come not only for labels, but for transparencies, card stock, envelopes, etc. The reason for this is that the manual paper tray is designed to provide a straighter paper path that helps preventing your labels from peeling inside the unit. Therefore, I do not recommend placing them in the regular paper tray. Take note that you should also check that the labels purchased specify they are meant for laser printer or copier. Regular labels, or labels designed for inkjet printers will surely come off inside your printer and cause damage that the warranty will not cover.
Posted on Apr 16, 2010
SOURCE: Please help. The device
This is a corrupted Postscript error.
Possible solutions are, reload up to date driver and/or firmware. Go to Xerox website address below for drivers and firmware.
This could also be a program specific problem, try printing from another software package.
Finally, you could try an NVRAM reset. Go to 'Troubleshooting', 'Service Tools', 'Reset NVRAM'. WARNING, before performing an NVRAM reset, print out a configuration page. 'Information', 'Information Pages', 'Configuration Page'. This print out will give you all the printers settings, including your network settings, which will be lost through the reset. You will need to re input them through 'Printer Setup', 'Connection Setup', 'TCPIP'.
Hope this helps.
Posted on Jan 22, 2011
SOURCE: When I turn the Printer
1. Turn the printer off, wait 10 minutes, and then turn the printer on. 2. If the message persists, reseat the fuser. If that does not work, replace the fuser. To check the fuser, turn the printer off and remove the fuser. Measure the resistance between the fuser connectors. If it is not within the proper range, replace the fuser. If there is not continuity between the fuser connectors neutral and hot with the fuser removed, replace the fuser. If the problem is not related to the fuser, replace the engine controller board.
Fuser Ref: http://computer.howstuffworks.com/laser-printer3.htm
Posted on May 05, 2011
Tips for a great answer:
Dec 19, 2015 | Samsung ML 1610 Laser Printer
Mar 10, 2014 | Samsung Office Equipment & Supplies
Your printer monitors the life of your transfer belt. When the transfer belt reaches the end of its
life, the printer displays
80 Belt Exhausted. This message indicates it is time for you to
replace the transfer belt. For best print quality, make sure you replace the transfer belt when
the printer displays
80 Belt Life Warning.
Go to clear the message. The Supplies message appears on the second line of the
display to remind you that supplies need attention. You can open the Supplies Menu to see
80 Belt Exhausted
or 80 Belt Life Warning messages.
The printer continues to display the
Supplies message until you replace the transfer belt. To
replace the transfer belt, use the following steps or the instruction sheet supplied with the
Nov 26, 2012 | Samsung CLP-610 Series
Apr 15, 2010 | Samsung CLP-500N Laser Printer
Mar 16, 2010 | Samsung CLP-510 Laser Printer
Oct 01, 2009 | Samsung CLP 315 Laser Printer
Dec 01, 2008 | Samsung CLP-510 Laser Printer
Jun 05, 2008 | Samsung CLP-510 Laser Printer
37 people viewed this question
Usually answered in minutes!