Question about Kitchen Ranges

1 Answer

Upper oven locked and cannot unlock. It operates but...

Upper oven is locked tight. Cannot unlock. Yellow display LOC is not not present . Blue display says it is locked. Oven will come on and operate but door cannot be unlocked. It just beeps. Wonder if there is come kind of reset or do I need Sears to deal with this. Any ideas appreciated. Only four months. It worked this AM but not this PM. Thanks.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 117 Answers

Have you tried cutting the breaker to reset it ? This will sometimes work on electronic equipment to reset factory default settings.

Posted on Jul 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We a kitchen aid oven the door was accidentally lock. Can you find out how to open it? Whirlpool owns kitchen aid


  • Look for a manual lever to unlock the oven. If there is one, it will probably swing back and forth horizontally, just below the upper edge of the oven door

  • Swing the locking lever, if one is present, all the way to the left. This should unlock the oven. If there is no manual lever to unlock the oven, it may be unlocked using push-button controls.

  • 3

    Check to see if the oven is in a self-cleaning cycle, or has just completed a self-cleaning cycle. If so, the door will unlock automatically once the oven has finished the cleaning cycle and cooled completely, which may take several hours. You cannot unlock the oven before it has cooled.

  • 4

    Unlock the "Clean/Off" button. Depending on the brand and model of your oven, the button may display both of these designations or just one. If your oven door is locked, but the oven is not warm and is not in a cleaning cycle, unlock it by pressing and holding the "Clean/Off" button.

  • Nov 18, 2012 | Ovens

    1 Answer

    Cannot unlock oven door


  • Here it is!

    Look for a manual lever to unlock the oven. If there is one, it will probably swing back and forth horizontally, just below the upper edge of the oven door.

  • Swing the locking lever, if one is present, all the way to the left. This should unlock the oven. If there is no manual lever to unlock the oven, it may be unlocked using push-button controls.

  • Check to see if the oven is in a self-cleaning cycle, or has just completed a self-cleaning cycle. If so, the door will unlock automatically once the oven has finished the cleaning cycle and cooled completely, which may take several hours. You cannot unlock the oven before it has cooled.


  • Unlock the "Clean/Off" button. Depending on the brand and model of your oven, the button may display both of these designations or just one. If your oven door is locked, but the oven is not warm and is not in a cleaning cycle, unlock it by pressing and holding the "Clean/Off" button.

    Nov 10, 2011 | Maytag Ovens

    2 Answers

    How do you unlock a kenmore elite cooktop?


    You can do this by:
    Check the oven display to see whether the screen says "LOC." When "LOC" is displayed, the oven lock is activated and the door cannot be opened. You need to make sure it is locked so you do not mistakenly lock the door.

  • 2 Press and hold the "Stop" button on the oven control panel until "LOC" disappears from the display. Some oven models have a button marked "Oven Lock," which should be used instead of the "Stop" button.
  • Lock the oven again by pressing and holding the "Stop" or "Oven Lock" button until "LOC" appears in the display


  • Feb 03, 2011 | Kenmore Elite 44173 30 in. Electric...

    1 Answer

    Used the self cleaning cycle 24 hrs. ago, but the oven door will not unlock. We tried to run it through another clean cycle but we recieve an E1 error.


    Sorry to read about your problem, I hope this helps you out.
    you may have done a panel lock, so try the first solution.

    To Lock/Unlock Control: Before locking, make sure the ovens, Timer and Timed Cooking are off. Press and hold START/ENTER until a single tone sounds and "Loc," a picture of a lock and "START?" will appear on the oven display, about 5 seconds. Repeat to unlock and remove "Loc" from display.

    To Stop Self-Clean any time:
    Press UPPER OFF, LOWER OFF or OFF/CANCEL. If the oven temperature is too high, the door will remain locked. It will not unlock until the oven cools.

    I tried to help you. Please help me and Rate/Vote on my response. We take the time to answer your question. take the time to rate us.Thanks and good luck

    Dec 25, 2010 | Whirlpool RBD245PDS Electric Double Oven

    3 Answers

    Oven Door panel is showing LOC position but can be opened and closed so not locked. Unable to use oven for cooking


    What is the exact make and model of your oven? Unplug the power cord for one hour to reset the display

    Mar 18, 2010 | Kitchen Ranges

    1 Answer

    How to start oven in PROPANE STOVE


    Print the following infore for future ref if you wish. How it works is simple tage a look at it in Motion
    Component Test Procedure Results
    Electronic
    range control
    F1−1 –Upper Oven >650°F with door unlocked.............................
    F1−2 –Lower Oven >650°F with door unlocked.............................
    F1−3 –Upper Oven >950°F with door locked.................................
    F1−4 –Lower Oven >950°F with door locked.................................
    F1−7 –Membrane switch is not responding ...................................
    F3−1 –Upper sensor is shorted at (< 100 ω) or
    open at (>5 K ω) ...............................................................
    F3−2 –Lower sensor is shorted at (< 100 ω) or
    open at (>5 K ω) ...............................................................
    Check actual upper oven temperature,
    if > 650°F check sensor.
    Check actual lower oven temperature,
    if > 650°F check sensor.
    Check actual upper oven temperature,
    if > 950°F check sensor.
    Check actual lower oven temperature,
    if > 950°F check sensor.
    Check membrane switch for connection or damage.
    Check upper sensor, harness, and connections
    Check upper sensor, harness, and connections
    Engineering
    Test Mode
    Press BAKE pad.
    Enter 100°F using the number pads.
    Immediately push and hold BAKE pad for appropriate oven
    approximately 3 seconds.
    This mode can also be entered by pressing the hidden pad
    for 3 second located to the left of the lower oven light pad.
    Used to view the actual oven temperature for both ovens at all
    times, even when an oven function is active.
    This mode will also display the current fault code for 5
    seconds in the time digits.
    Fault codes
    accessed
    through
    Engineering
    Test Mode
    F0−0 –No fault .................................................................
    F1−5 –Upper hardware failure within control ....................
    F1−6 –Lower hardware failure within control.....................
    F1−8 –Shorted key in membrane switch ..........................
    F1−9 –Internal communication errors within control .........
    F1−A –Upper latch switches ............................................
    F1−B –Lower latch switches.............................................
    F1−C –Upper door switch.................................................
    F1−D –Lower door switch.................................................
    F1−E –Sensor input not calibrated ...................................
    F1−H –EEPROM error .....................................................
    F1−L –Temp in ovens are the same for long period .........
    F1−N –Internal voltage on control not working .................
    F9−1 –Upper lock switch is not correct.............................
    F9−2 –Upper unlock switch is not correct.........................
    F9−3 –Control does not see upper door lock....................
    F9−4 –Lower lock switch is not correct.............................
    F9−5 –Lower unlock switch is not correct.........................
    F9−6 – Control does not see lower door lock ...................
    EE –Control cannot read E-PROM. Unit will shut down.
    Default from factory
    Replace control
    Replace control
    Check membrane connection
    Replace control
    Check latch wire harness
    Check latch wire harness
    Check lock wire harness
    Check lock wire harness
    Verify sensor is operating properly
    Replace control
    Verify sensor is operating properly
    Replace control
    Check lock wire harness, and lock switch
    Check lock wire harness, and lock switch
    Check lock wire harness, and lock switch
    Check lock wire harness, and lock switch
    Check lock wire harness, and lock switch
    Check lock wire harness, and lock switch
    Disconnect power for 60 seconds. If EE reappears, replace ERC
    Test Mode This mode must be activated within the first 5 minutes of
    power up.
    Press BROIL and CANCEL pad for approximately 3 seconds.
    If oven temperature is greater than 400°F, the Test Mode
    cannot be activated or will abort if active.
    Press and hold individual pads for 4 seconds to activate.
    Display will have dashes in all segments to indicate the mode is
    active.
    Upper Bake: Energizes upper bake element
    Lower Bake: Energizes lower bake element
    Upper Broil: Energizes upper broil element
    Convection Bake: Energizes convection fan
    Upper Oven Light: Energizes upper oven light
    Lower Oven Light: Energizes lower oven light
    Upper Clean: Energizes upper motorized door lock
    Lower Clean: Energizes lower motorized door lock
    Stop Time: Energizes Beeper
    Cook Time: Displays error codes
    Timer 1: Energizes ROM version
    Timer 2: Energizes EEPROM version
    Keep Warm: Cooling Fan
    Clock: All display segments light
    If functions do not perform as specified, replace ERC
    Oven
    temperature
    adjustment
    Push BAKE pad.
    Enter 550°F using the number pads.
    Immediately push and hold BAKE pad for appropriate oven
    approximately 3 seconds.
    To decrease or increase oven temperature. Push AUTO SET
    pad until negative or positive numbers appear. Oven can be
    adjusted from -35° to +35° (-37.2° to + 1.6° C) in 5° F (2.7° C).
    To avoid over adjusting oven move temperature -5° each time.
    Push OVEN CANCEL button.

    Sep 04, 2009 | Frigidaire 30 in. Electric Gallery Series...

    1 Answer

    I accidently put the lock on my oven.Now the lock will not come off. Please help


    Hi

    The oven door and controls can be locked to avoid unintended use of the oven. The oven doors and controls cannot be locked if the oven is in use, or the oven temperature is 400°F (205°C) or above.

    To lock the control panel and both oven doors:

    1. Press and release Cancel.
    2. Press and hold upper oven Cancel and Cook & Hold for 3 seconds. “Off” appears in the display and “Lock” flashes while the controls and oven doors lock. Both oven doors lock. “Lock” remains lit in the display.
    To unlock the control panel and both oven doors:

    Press and hold upper oven Cancel and Cook & Hold for 3 seconds. “Off” disappears from the display and “Lock” flashes while the controls and oven doors unlock.

    Please see this link for more information as how to disengage the lock on your Jenn Air Oven---

    Door Lock On Oven

    Please do rate this solution as FixYa and revert for further assistance.

    Thanks
    Rylee

    Apr 21, 2009 | Jenn-Air SVE47100 Slide-In Electric...

    1 Answer

    Jensen t.v model ts2750j blue screen red lock upper left


    My Advent TV did the same thing. Blue Screen with a red lock in the upper left corner. Just press and hold the display button for about 10 seconds. It will clearn

    Feb 02, 2009 | Jensen TS2750J TV

    2 Answers

    My oven is in lock mode after i had cleaned it. I can't open it now and the lock light is on.


    Control panel and oven door lock
    The oven door and controls can be locked to avoid unintended use of the oven. The oven doors and controls cannot be locked if the oven is in use, or the oven temperature is 400°F (205°C) or above. The current time of day will remain in the display when the controls and oven doors are locked.
    To lock the control panel and both oven doors:
    1. Press and release Cancel.
    2. Press and hold upper oven Cancel and Cook & Hold for 3 seconds. “Off” appears in the display and “Lock” flashes while the controls and oven doors lock. Both oven doors lock. “Lock” remains lit in the display.
    To unlock the control panel and both oven doors:
    1. Press and hold upper oven Cancel and Cook & Hold for 3 seconds. “Off” disappears from the display and “Lock” flashes while the controls and oven doors unlock.

    Dec 22, 2008 | Jenn-Air Electric Double Oven

    1 Answer

    Oven wont work everytime we push bake E1 and F1 appear


    Is the display showing E0-F5?
    The Self-Cleaning latch may be interfering with the oven door causing the Self-Cleaning cycle not to work. If the oven door is open and will not lock, press Stop/Clear to clear the display, press and hold the door switch plunger (located in the upper-right corner of the oven front), and the door latch will unlock. If the oven door is closed and locked, press Stop/Clear to clear the display; apply pressure to the upper-right corner of the oven door, and the door will unlock.
    Is the display showing E"#"-F"#," for example, E1-F2?
    You will need to schedule service.

    Aug 24, 2008 | Whirlpool Kitchen Ranges

    Not finding what you are looking for?
    Kitchen Ranges Logo

    Related Topics:

    123 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Kitchen Ranges Experts

    Dan Webster
    Dan Webster

    Level 3 Expert

    8220 Answers

    yadayada
    yadayada

    Level 3 Expert

    76164 Answers

    paulcarew

    Level 3 Expert

    2519 Answers

    Are you a Kitchen Range Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...