Question about Epson Office Equipment & Supplies

Open Question

Epson L550 - scanner error see your documentation

This errer appears at initilization and printer nor the scanner works. Power button light and ADF lights keeps flashing.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 18 Answers

SOURCE: printer light flashing

check the cables. if need be changed the usb cable .2 it may be a fault logic board in the printer. if it faulty logic board it cheaper to buy an new printer

Posted on Sep 25, 2007

Ad
  • 1 Answer

SOURCE: HP Printer - Scanning Documents

i had the same problem with vista home premium. vista does not support one touch scanning (pressing the scan button on the printer). to use scanner with vista home os use the paint application and start scanning with the file section. step by step:
start (windows) icon lower left tool bar
programs
accessories
paint
file
from scanner or camera
the hp should start working - note: i sent a short cut to the desk top for the paint program for future use

Posted on Feb 04, 2009

  • 1 Answer

SOURCE: ADF for MP530 does not work

Welp, I pulled out my screwdriver and fiddled around just a bit and got documents to feed again (yay!). I do not believe this is a permanent fix, though, but it was enough to get my document scanned in without me having to feed each sheet manually.

Step 1: Open the document feeder cover. Easy to do, you just stick your hand under it and lift up. It has a little pressure because of the latch but it is designed to give way when you lift hard enough. Once it's open, pull out the little black plastic piece that keeps the cover from swinging all the way open.
2adf9b2.jpg

Step 2: Unscrew the ADF motor/gear assembly cover. There's a single screw holding it in. Once you unscrew it, you'll need to pull up on the left side of the cover until it pops upward, then you need to push the cover towards the left until it is freed up from the rest of the cover. This one was a little tricky. Several times I thought I might break it (before I realized that I needed to push the cover towards the left) so try not to apply unreasonable force while you're doing this.
3f8659f.jpg

Step 3: Close the document feeder cover, put your documents in the feeder and start your scan. Use your fingers to fiddle with the gears while the ADF motor is running and trying to feed documents. I'm not sure if I flicked the little gear upward or downward to get the documents to feed, but one of those ways got the documents to start feeding. Once it started feeding the first page, it seemed to work well for the rest of the pages without me having to fiddle with it anymore.
eca0d75.jpg

I am guessing that there is some level that controls the location of the middle gear that needs to be oiled, but I didn't go any further to try and make that happen. Hence this is probably just a temporary fix for now.

Putting it back together is pretty straightforward. Just do the reverse of what you did to get it open.

Hope this helps someone!

Posted on Jul 03, 2009

seanpwright
  • 2030 Answers

SOURCE: Epson Stylus TX100 printer Woeks but scanner not

It is a scanner as well, but you have to access the scanner through the software that came with it

Posted on Aug 27, 2009

Toad tool
  • 33 Answers

SOURCE: When I click the print button SERVICE ERROR 6A00

throught it out the window get a hp printer more reliable

Posted on Dec 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a message on screen sayng " ADF Jam" there is no paper jamming the system. I cannot make this message go away, and so i cnnot use any other function of the printer. How might I clear...


Hi travlynn2,

  1. The ADF
    unit is the grey paper tray located on the top of the scanner unit.
    Check the following points if it does not feed paper, or you receive an "ADF jam" error message:


  2. Check the position of the ADF document guide:


    1. Lift up the ADF unit. Locate the document guide on the underside, as shown here:


    2. The document guide should be tucked in behind the grey plastic casing, but a paper jam can push it out of position. Figure 8 below shows the correct (1) and incorrect (2) positions:


    3. If your document guide looks like example (2)
      on the right, lift it out on the right-hand side. Tuck it in behind the
      grey section, so that it matches the example on the left (1).




    1. Close the scanner unit.


    2. If the printer is displaying "ADF Jam, press start to continue", press the B/W Start button to clear the error:


    3. Test the printer by scanning or faxing via the ADF unit.


  3. Check the ADF edge guides:




    1. The adjustable paper tray edge guides must be set to the correct paper size for the paper you are loading. Otherwise, the paper may skew, misfeed and/or jam.



    2. Slide the edge guides to enclose the loaded
      paper (in the direction of the yellow arrows below), without causing it
      to bunch or crease. The paper should be aligned with the relevant paper size marker:

      Figure 9. The ADF edge guides.


  4. Check the ADF unit feed rollers:


    1. Open the cover of the ADF by pulling up the grey lip, as shown below:


    2. Check thoroughly for fragments of paper and foreign objects. Take care not to tear any jammed paper when you remove it.


    3. Use the green gear (circled in yellow below) to turn the paper feed rollers and feed through jammed paper:



    4. Paper dust or foreign material on the rollers may cause paper to misfeed. Clean these parts with a damp, well-wrung cloth:


      1. The upper paper pickup rollers (circled in red, above top left). You can turn these by hand.



      2. The lower paper pickup rollers. These will rotate as you turn the green gear (circled in yellow above). See the inset for a close-up of the lower rollers.


    5. When complete, close all the covers.


    6. If the printer is displaying "ADF Jam, press start to continue", press the B/W Start button to clear the error:


    7. Test the printer by scanning or faxing via the ADF unit.



  5. Check that the ADF unit sensors are not obstructed.




    1. Open the cover of the ADF unit.



    2. Look at Figure 12 below. Check the position of the black plastic parts (the actuators) circled in red.



    3. If the black plastic actuators do not stick out from the ADF cover, they may have been pushed out of position by a paper misfeed and be obscuring the ADF sensors. Tap the back of the ADF unit firmly to release the actuators.


    4. When complete, close all the covers. Check and test the printer as explained in Step 6.d.vi.
Hope this helps.

Thank you for using FixYa.

Sep 21, 2011 | Epson ACULASER CX11NF All-In-One Printer

1 Answer

Automatic Document Feeder


turn it OFF then locate the cable that is connecting the ADF and the main FLATBED scanner. Disconnect and re-connect it.

Oct 09, 2008 | Epson ACULASER CX11NF All-In-One Printer

2 Answers

Epson cx3200 printer has printing problem


Hello cockie ,

You can diagnose most problems by checking the control panel LED's for ink out, paper-out or copier problem.
If a problem occurs while you're printing, you'll see an error message in the progress window on your computer.
It may also be helpful to try running a printer nozzle check.

See the following message problems and solutions:

Error Message Probable Cause No color or black ink cartridge - - >
Press the Color Copy button to install a new ink cartridge.
The indicated cartridge is not installed or it is installed incorrectly. Color or black ink out - - >
Press the Color Copy button to begin replacing the ink cartridge.
The indicated cartridge is out of ink Ink cartridge error - - >
Press the Color Copy button to begin replacing the ink cartridge.
There is something wrong with the ink cartridge. Paper jam or misfeed - - >
Press the Color Copy button and clear the paper jam by hand if necessary.
Paper is jammed. Press the Color Copy button to clear the jam.
See the User's Guide for more troubleshooting tips.
Paper out - - >
Load paper in the sheet feeder and press the Color Copy button.
Paper is out. Load paper in the sheet feeder, then press the Color Copy button to continue printing. Scanner unit open - - >
Close the scanner unit.
Scanner cover open. Carefully lower the scanner cover and press it down until it clicks securely into place. Scanner error - - >
See your documentation and call Service if necessary.
Press the On button to turn off the EPSON CX3200. Check the transportation lock and unlock it, if necessary. Turn on your EPSON CX3200 again. If the error message still appears, contact your dealer or EPSON. Printer error - - >
See your documentation and call Service if necessary.
Press the On button to turn off the EPSON CX3200, then press it again to turn it back on. If the message still appears, contact your dealer or EPSON.

Mar 23, 2008 | Epson Stylus CX3200 All-In-One InkJet...

2 Answers

Paper jams


Paper jams - Kodak Printers

Feb 19, 2011 | Kodak Office Equipment & Supplies

2 Answers

I have a Cannon Pixma MX320 all in one printer and I cant get it to stop saying document in ADF


Issue: ERROR LCD: DOCUMENT IN ADF
Solution: Remove foreign object from the Automatic Document Feeder (ADF) - MX310
Check the Automatic Document Feeder (ADF) for obstructions
Follow this procedure to check the ADF for obstructions. You do not need to turn off the power when clearing document jams.
Document jams in the ADF (Document Tray)
  1. Press <Stop/Reset>.

  2. If a multi-page document is loaded, remove any documents other than the jammed page from the ADF, then open the Feeder Cover.

    openfeeder.gif


  3. Remove the jammed page from under the roller to the Feeder Cover side.


    remjammed.gif
  4. Pull out the jammed document from the ADF. If the document cannot be easily pulled out, proceed to section Document jams in the ADF (inner side).

    pullout.gif

  5. After removing the jammed document or if a document is not jammed, check the document feed area to make sure there is no foreign material. If you find foreign material, carefully remove it.
  6. Close the Feeder Cover.

    Note : If documents remain in the ADF after pressing the Stop/Reset button during scanning, "DOCUMENT IN ADF" appears on the LCD. Press the OK button so that the remaining document is automatically fed out.

    When rescanning the document after clearing the error, rescan it from the first page.

    Note: The document may not feed properly depending on the media type, or your environment, such as when the temperature and humidity are either too high or too low.
    In this case, reduce the number of document pages to approximately half of the loading capacity. Another alternative is to scan from the platen glass
    .

  • If documents remain in the ADF after pressing <Stop/Reset> during scanning, [Document in ADF] will appear on the LCD. Press <OK> so that the remaining document is automatically fed out.
  • When rescanning the document after clearing the error, rescan it from the first page.



Document jams in the ADF (inner side)
  1. Press <Stop/Reset>.

  2. If a multi-page document is loaded, remove any documents other than the jammed page from the ADF, then open the Feeder Cover.


    openfeeder.gif
  3. Raise the paper release lever (A) then remove the jammed page from under the roller to the Feeder Cover side.

    remjammed.gif

  4. Open the Document Cover and pull out the document from the inner side.

    opendoccover.gif

  5. Close the Document Cover.

  6. Close the Feeder Cover.

    Note: When rescanning the document after clearing the error, rescan it from the first page.
Document jams in the ADF (Document Output Slot)
If the document is jammed in the Document Output Slot, pull it out.
pulloutofslot.gif Note: When rescanning the document after clearing the error, rescan it from the first page.


Trust this is helpful. Please vote. :)

Dec 12, 2010 | Canon PIXMA MX310 All-In-One Printer

2 Answers

ADF paper jam, when there is none


If you are receiving an Error Code 103 or a Paper Jam error, but there are no pages in the ADF (Automatic Document Feeder), follow the steps below:
  1. Close the scanning application (such as PaperPort)
  2. Turn off the scanner and the computer
  3. If you have a combination ADF with a Flatbed scanner, unplug the ADF cable from the base of the scanner
  4. Plug the ADF cable back in
  5. Turn on the scanner power
  6. Turn on the computer
  7. Try scanning again
For a Paper Jam or Error Code 103, make sure that the ADF cable in the rear is connected to the scanner base. Check the flatbed to make sure that it is clear. A page incorrectly placed on the flatbed may interfere with a page feeding through the ADF.

If your scanner stops scanning due to a paper jam in the Automatic Document Feeder (ADF), a warning dialog box appears after a few moments.

To clear a paper jam:
  1. Open the Automatic Document Feeder cover.
  2. Remove the jammed paper and close the cover.
If you are receiving a paper jam error, or if the scanner is running continuously, check to make sure the paper sensor arm is not stuck down.
  1. Open the Automatic Document Feeder cover.
  2. Look for the small black plastic arm
  3. When you press on this arm, it should move freely up and down
  4. If the arm is stuck down, please contact Technical Support for troubleshooting options
  5. Close the ADF cover.

May 26, 2009 | HP Scanjet 8350 Flatbed Scanner

1 Answer

ADF Jam... Service req c2011


Hello,

Can be a tough one.

1st - Open the ADF & make sure that the 2 little Sensor tabs move freely.

2nd - Lift the ADF & check that the White Plastic Paper Guide is "down in the slot" & not resting on edge of the white flat bed scan pad or overlapping the scan pad.

For some C Error Codes

Check for electrical interference from external devices.
Disconnect the Printer from all devices, and run a test print..


Here are the "c2011 error" fixes per the manufacturer:

Replace the Automatic Document Feeder.
Replace the Scanner.
Replace the Main Board.
-------------------------------------------------
You might try unplugging the ADF & see if you can operate without it.

If you unplug the scanner, the printer might not function.

-------------------------------------------------

Jan 27, 2009 | Epson ACULASER CX11NF All-In-One Printer

1 Answer

Help Epson CX3200


Hi,

I just like to ask to where specifically you can see the red light. It will help us determine what cause the red light. To give you heads up as well, the Printer's LCD screen can help us determine what exactly the offline condition of the CX3200 is:


Error message: No color or black ink cartridge-->Press the Color Copy button to install a new ink cartridge.
Solution: The indicated ink cartridge is not installed. Please install the necessary cartridge(s).

Error message: Color or black ink out -- >Press the Color Copy button to begin replacing the ink cartridge.
Solution: The indicated ink cartridge is out of ink. You will need to replace the necessary ink cartridge(s).


Error Message: Ink cartridge error -- > Press the Color Copy button to begin replacing the ink cartridge.
Solution: There is something wrong with the ink cartridge. Make sure the cartridge is genuine Epson ink. Also, try reseating the cartridge (remove it, and then reinstall it).

Error Message: Paper jam or misfeed -- > Press the Color Copy button and clear the paper jam by hand if necessary.
Solution: Paper is jammed. Check for any obstructions under the unit's cover, and in the paper tray.

Error Message: Paper out -- > Load paper in the sheet feeder and press the Color Copy button.
Solution: Load paper in the sheet feeder, and then press the Color Copy button to continue printing.

Error Message: Scanner unit open -- > close the scanner unit
Solution: Carefully close the scanner and press it down until it clicks securely into place.

Error Message: Scanner error -- > See your documentation and call service if necessary.
Solution: Press the ON button to turn off the Epson Stylus CX3200. Unlock the transportation lock, if necessary. If it is already unlocked, toggle the lock back and forth, 5-10 times. Turn on your Stylus CX3200 again.


Error Message: Printer error -- > See your documentation and call service if necessary.
Solution: Press the ON button to turn off the Epson Stylus CX3200. Disconnect it from power, and then reconnect it to power. Press the ON button to turn on the Stylus CX3200.

May 23, 2008 | Epson Stylus CX3200 All-In-One InkJet...

2 Answers

ADF jam


Turn off printer and unplug it from power supply.
Check ADF if it appears to be damaged ( open the top portion so that you can check the mechanisms ) unplug the ADF cable from back of scanner and replug it, replug power cable, turn it on and try scanning using adf again.

Feb 29, 2008 | Epson ACULASER CX11NF All-In-One Printer

7 Answers

Scanner failure


OK..

Clean the scanner head and glass

Removing the scanner glass

General
The Automatic Document Feeder (ADF) will need to be removed before the glass can be removed. You will also need a T10 Torx head driver approximately 6" long. Driver handles that accept removable bits may be too large in diameter for this particular job.

Removing the automatic document Feeder (ADF)
1. Hinge the ADF upward as if you are going to manually scan a document.
2. In the hinge area there is two black pull latches. Pull them up and lift the ADF straight up to remove it. Some side-to-side rocking may be necessary before it will disengage.

Removing the Scanner Glass
1. Remove the four T10 Torx head screws around the perimeter of glass, i.e. two in the ADF hinge area and one on the right and left.
2. Remove the Control Panel overlay. It pries off.
3. Open the printer as if you are going to access the cartridges and disengage the support legs. Two latches at the base of each leg must be pried outward with a slot style screwdriver to disconnect them. The scanner assembly will now "flop" freely, so steady it while removing the four screws on the underside.

Note: The screw in the front is hidden under the piece that you grasp to gain cartridge access. Two latches must be released to remove it. The screw can now be seen using a flashlight but may be obscured by some wires.


Clean the underside of the glass, giving particular attention to the white strip. Then clean the scanner bulb (gently, its thin glass) and the mirror(s) with a cotton swab sparingly moistened with Windex or a similar cleaner.

Nov 25, 2006 | HP OfficeJet D135 All-In-One InkJet...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

290 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...