I just installed ProScan T.v. and can't figure out how to program to show digital channels. Can you help?

To whom it may concern,
My suggestion is to call DirecTv customer support and request they walk you through the programming process. This is not a difficult process for them to help with. If this does not work, don't be afraid to schedule a technician visit.

Best wishes,
Dish Guy

If you need further help, I’m available over the phone at https://www.6ya.com/expert/brian_142c5ec89a7a3fda

Let it finish and then click input on your remote.

Hi cjichel1830,my name is Mike Houston of DISH Network and I was going over your post and seewhere the new receiver won't auto-tune. With the new receiver if the remote hasnot been programmed to the new receiver and TV it will not work. I will giveyou this link http://www.dishnetwork.com/SupportSection/setup-receiver-totv,and it will help you with the setup of your new receiver and remote, if youhave any questions please e-mail me at [email protected].

your toshiba player should have output composite video and audio which are color coded Yellow for video, red and white for audio same goes for proscan hdtv. connect between the two keeping in mind color of cables. If the toshiba player is really old you can connect the RF cable output to antenna input to the proscan tv and watch taped programs from the player on channel 3 of the proscan tv. If then you want to keep the hookup and still watch HDTV connect the antenna to the toshiba vcr and when you shut off the vcr you can now watch the hdtv channels as usual because now you are bypassing the antenna to the Proscan tv. Hope this Helps..

bought 26 in pro scan tv can't figure out how to connect dvd player,craziest thing i've ever seen.please help

Press the menu button on your remote.  That should give you the main menu where you can go into add/delete channels and do an autoscan to only save channels that are good.

Make sure in the menu that you have the tuner set to Cable Mode, then auto program again. Hope this helps.

Go into your menu and make sure the tuner is on Cable, then auto-program....Let me know?

I need programming instructions for proscan universal remote control. I have code.

Try this..Run cable line into VCR in, cable from VCR out to box, then cable from box to TV..this might work...I have done this for YEARS and it is never failed. You can then watch and record 2 things at once.