Question about VIA Computers & Internet
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Windows 2000/XP 1. Click on the Start menu, and then click on the Run option. 2. When the ?Run? window appears, input control ncpa.cpl into the ?Open? field. 3. After the ?Network and Dial up Connections? or ?Network Connections? window opens, right click on the Local Area Connection or Wireless Network Connection which controls the connection to the router. 4. After the ?Local Area Connection Properties? or the ?Windows Network Connection Properties? window appears, click on Internet Protocol (TCP/IP) then click on the Properties button. 5. Once the ?Internet Protocol (TCP/IP) Properties? window opens, change the option from ?Obtain an IP address automatically? to Use the following IP address. Set the options under ?Use the following IP address? and ?Use the following DNS server addresses? to the following: * IP: 192.168.1.20 (If there are multiple computers being setup with static IP's, then the next computer would be .25, and next would be .30, etc) * Subnet Mask: 255.255.255.0 * Default Gateway: 192.168.1.1 * Preferred DNS server: 192.168.1.1 6. Click OK then OK or Close. Windows 98/ME 1. Click on the Start menu, and then click on the Run option. 2. When the ?Run? window opens, input control netcpl.cpl into the ?Open? field, then click on the OK button. 3. When the ?Network? window opens, locate the TCP/IP for the Wireless or Ethernet adapter in the PC, and click on it. Once it?s highlighted, click on the Properties button. 4. Change option from Obtain Automatically to Specify and input: * IP: 192.168.1.20 (If there are multiple computers being setup with static IP's, then the next computer would be .25, and next would be .30, etc) * Subnet Mask: 255.255.255.0 5. Click on the Gateway tab, and input 192.168.1.1 into the ?Default Gateway? field and click the Add button. 6. Click on the DNS Configuration tab, then go to the ?Host Name? field and input Computer, then go to the ?DNS Server Search Order? field and input 192.168.1.1 then click the Add button. 7. Click OK then OK once more, then windows will prompt for a restart.
Posted on Feb 16, 2006
Keep in mind that once you have configured the wireless networking on the print server, you MUST disconnect it from the wired network. It uses the same MAC (aka "hardware") address on both interfaces, so when it tries to participate on both, it fails to be networked at all. Make sure you're only using one (wireless or wired) network at a time.
Posted on Jan 14, 2008
I work for zebra. you should user zebra net bridge, its the current network tool and the best to use
Posted on Sep 03, 2008
Your print server has to have its own IP address. If you have your computer as 188.8.131.52 then your print server would be 184.108.40.206.
You cant have the same IP address on any 2 items on your network.
Posted on Oct 21, 2009
Tips for a great answer:
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address
in the TCP/IP section.
The following reports may be viewed from the Embedded Web Server:
Printer Server Setup Page
Jul 25, 2012 | Lexmark E260dn Laser Printer
Feb 03, 2011 | Computers & Internet
If you need more help come back.Post /
thumbs / testimonial are
Nov 26, 2010 | HP Officejet Pro 8500 Wireless All-In-One...
Aug 28, 2010 | EnGenius EOC2610 80211g Outdoor High Power...
Aug 25, 2010 | D-Link DP 303 (DP-303) Print Server
Mar 12, 2009 | Xerox Phaser 8500/DN Printer
Oct 21, 2007 | D-Link RangeBooster G DPR-1260 (DPR1260)...
Feb 16, 2006 | Linksys EtherFast Cable/DSL Router
Feb 16, 2006 | Linksys WRT55AG Router
27 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: