Question about InFocus Televison & Video

1 Answer

My infocus IN1 projector won't turn on anymore.

My infocus IN1 projector won't turn on any more. I press the power button and nothing happens. If I unplug it and plug it back in the lamp and hourglass lights flash for just a second, the fan spins for the next 10 seconds, the two lights flash again, then everything turns off. Does this mean the bulb is burnt out? The power button also feels ''mushy'' so I am wondering if the button is hosed.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 23 Answers

Hi,
It may be the lamp is out. Normally a projector will try & fire the lamp 3-5 times then shut down with a different color light like amber or red. If the lamp doesn't light then it could be the lamp or perhaps the lamp ballast that starts the lamp has failed. A stuck fan also causes similar symptoms. There's 2-4 fans in the projector if one is stuck or bad it will turn off within 5 seconds or so after the lamp lights.
Does your lamp light at all? Are the lights a different color after it shuts down? Answers to these questions help figure out what's wrong though it's impossible to say for sure without looking at it. I service almost all Infocus projectors if you would like a quote please reply with your email address or write me at prmhelp@earthlink.net
Good Luck,
Jim

Posted on Oct 07, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to make my infocus show my cd on my PC


Infocus projector can show what ever on your desktop. if you open cd on desktop that will show on projector provided you are connected to your projector. Its better to power on projector first and then your computer!
Alternatively you can press Fuction button the button with green lettering on left lower part of keyboard and F4 on top simultaneously to show whats on desktop through your projector! if it does not happen press function button and F4 again!

Sep 11, 2011 | Computers & Internet

1 Answer

It wont turn on? i press the power button and nothing happens. Thats it.


I think that you projector lamp is broken, check all the contacts of the cables, if they are ok than the only thing (that i know of) that could be wrong is projector lamp
It's quite expensive :(

Oct 02, 2010 | InFocus LP540 LCD Projector

2 Answers

Infocus IN1 Gaming Projector


Hi, I just bought the same projector Infocus IN1 and after just 15 minutes of use it turned off due to overheating. It seems that the lamp is very ineffecient and produces too much heat. The ambient temperature in the room is only 16 deg. celcius. 

The solution I came up with is to have a standing fan blowing air directly on the back of the projector from less than a foot away. The standing fan which we usually use here in summer was enough to keep the projector cool. The infocus IN1 did not switch off for the next 2 hours (the entire length of the movie), until i turned it off myself. I am not sure how this system will fare in summer when the room temperature reaches 30 deg. celcius.

Oct 21, 2008 | Compaq Microportable 2810 Multimedia...

1 Answer

Wont turn on


I have the same problem. When I push the green button nothing comes on - just the green LED keeps blinking.....could you manage to find the solution

Sep 28, 2008 | InFocus User guide, LP500 / 530 Projector...

1 Answer

I recently bought a infocus in1 audio projector and i cannot get sound and picture together. only seperately by pressing the input botton


Sounds like you have the video and audio plugged into different inputs. For example the video is going to video 1 and the audio is going to the audio input of video 2

If you get only video one input and only audio on another input... Then the above described connection is the only thing that would cause this to happen!


Cheers

Jul 29, 2008 | InFocus Play Big IN76 Multimedia Projector

1 Answer

IN72


Try using a different cable.

If the response is the same on a different cable , then the Mainboard might be at fault - this machine should still be under warranty and the warranty will cover repairs.

Apr 05, 2008 | InFocus IN72 Multimedia Projector

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

826 people viewed this question

Ask a Question

Usually answered in minutes!

Top InFocus Televison & Video Experts

Donni Steen

Level 3 Expert

659 Answers

The Knight
The Knight

Level 3 Expert

74251 Answers

Brad Brown

Level 3 Expert

15756 Answers

Are you an InFocus Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...