Hotpoint range rb525gj wiring stamatics - Hotpoint Kitchen Ranges

It is a little known unit. Look on the back or inside the back panel. There is often a sticker or a service manual in a bag.

https://www.google.com/search?q=Hotpoint+RF755001HT

..

Question edited for clarity.
Question moved from Cars and Trucks to model category.

Wiring schematics are normally hidden on the rear of the stove on the inside of the rear panel. The don't appear to be available anywhere.

https://www.google.com/search?q=Hotpoint+oven+rb787bh1bb+Wiring+diagram

..

What code ? If you would like help with your problem need more info. What wiring has been replaced ? Code reads electrical what code ???????

look up online or appliance parts stores for replacement

Hi,

At the back of the oven the sensor wire connects to the erc wireing via a plug, cut out that plug, and hard wire the ends together, frequently that plugs connection is not tight enough, and will result in F2, if that does not fix it, replace the sensor.

Read more: http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/10627-f2-error-code-hotpoint-range.html#ixzz46QP6HeOd
http://forum.appliancepartspros.com

I’m happy to help further over the phone at https://www.6ya.com/expert/gere_bf68e6055dd61249

get in an electrician as there is power bypassing the switch and that makes the stove dangerous as it is n know what wire is incorrectly connected

90 % of Hotpoint range problems will be a loose or broken wire either at terminal block were cord hooks up. check wires from block to stove the wire running up to elements and control board
also check were range plugs into wall it may be loose and not getting good return. burners will work because there is no electronics involved just a infinite switch and coil burner
oven has a computer board for operation.
if you do not find the problem there then change control board
defective relay or computer chip

if it's not the igniter, check for loose wires in the top - my husband tightened one leading to the control board, seems to be working now

Schematics for these rear axles are many. I will need the axle code to fetch the correct ones for you. A one ton have 14 different rear axle designs