Question about Vizio Televison & Video
Hooked rabbit ears into tv port and cable still shows on imput
Weak signal? Try introducing a known working video source and see if set works. If so, try hooking up an antenna amp to the rabbit ears. If that gets some results you need to either get cable or a good outdoor aerial.
Posted on Apr 25, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Connect your rabbit ears to the Insignia. Connect the Insignia to the antenna input on the "cvd/vcr combo". Now turn on the television to show the "cvd/vcr combo".
The Insignia simply goes between your antenna and your television. In your case you also have a vcr so if you want the VCR to be able to play and record digital stations you will need the Insignia between the vcr and the antenna.
Posted on Jan 01, 2009
Your TV is old enough to have not only screw terminals for the antenna, but it sounds like it has separate UHF and VHF terminals as well. Pick up a 75-ohm to 300-ohm adapter (available at Radio Shack and probably most other places that sell TV's and antennas). This is a small cylinder-shaped part with a threaded antenna connector on one end, and a flat wire with two terminals on the other end. Connect the cable from the converter box to the round connector, hook the two terminals to the VHF antenna screws on your TV, put the TV on channel 3 and you'll be set.
You should also pick up a new antenna designed to work with digital broadcasting. If you use the old rabbit ears you were using before, you will probably not pick up all the channels available in your area.
Posted on Feb 19, 2009
you don,t , the xbox 360 will have component cables and posibly an hdmi output , but you can plug the component cables directly to the tv in a auxillary input and on your menu screen it will either say video1 or video2 or video 3 ,you can put the cables from your xbox into those inputs on the tv and as long as your tv is also at that input you should have a signal , hope this helps ,glenn
Posted on Mar 03, 2009
Tips for a great answer:
Jan 16, 2014 | Element Electronics FLX3210 32 in. LCD TV
Apr 05, 2009 | Vizio L32 32 in. LCD HDTV
Mar 19, 2009 | Televison & Video
Mar 12, 2009 | Olevia LT37HVS 37 in. LCD HDTV
Jan 09, 2009 | Televison & Video
Dec 28, 2008 | Insignia Digital-to-Analog Converter for...
Dec 17, 2008 | RCA TruFlat 27F520T 27" TV
Oct 25, 2008 | Sansui Televison & Video
25 people viewed this question
Usually answered in minutes!