Question about Cobra Radio Communications

Open Question

How to wire a turner Expander 500 to a cobra 2000 radio

It's a 5 pin plug for the cobra 2000 radio

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 39 Answers

SOURCE: how do i wire a expander 500 to a cobra 2000 gtl

I can't remember if the 2000 is a 4 pin mic, If it is the wiring will be 1 Sh/Red 2 White 3 Blue 4 Black ;Yellow not used.

Posted on Feb 20, 2009

Ad

SOURCE: how do i wire a

hi the easiest solution i find is to keep the ptt pressed remove wires from connector ,then place connector in radio try two wires at a time you will finally get the transmit wires then all you need is the audio ,you can flick over to ssb to sort the audio hope this helps you goodluck

Posted on Mar 26, 2011

anymhz
  • 500 Answers

SOURCE: trying to put a 6 pin plug on to a base mic a

Just check the wires on the mic switch. That will give you the right colors. This works with any mic. And any radio

Posted on May 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to wire a 4 pin to a 5 pin mic turner plus 3 to a cobra 142 GTl


pin#1 audio lead #2 audio shield #3 receive control #4 ground #5 transmit control

Apr 30, 2014 | Cobra Radio Communications

1 Answer

Galaxy echo 5 pin desk mike wiring to cobra 2000?


before you go thru all the trouble of wireing it ,what kind of radio did the desk mic come from.If it came from a galaxy then you shouldn't have to change a thing. 5 pin to 5 pin try it then if you have to wire it.

Apr 28, 2014 | Cobra 148 GTL 120-Channels Base CB Radio

1 Answer

Need wiring for roadking mic to deltaforce magnum radio


Turner
1-Shield & Red
2-White
3-Blue
4-Black
Yellow NC

Road King standard 4 pin wiring Gallaxy/ranger/cobra..............Magnum
I have no info on the 5 pin as i know the OmegaForce version has an addition mic plug, i figure yours might also.

Jul 29, 2011 | Magnum DeltaForce CB Radio

1 Answer

I have a general lee cb with a 4-pin standard mic. the wires in my mic cord broke at the plug. does wnyone know how to wire this type of mic back and what color wires go to the correct pin?there are 6...


Here are the Pin outs for different mics that will work with your radio. If a wire is not listed then you cut it off. It's best to keep the wires as short as possible no longer than a half inch is suggested. Normally the Cobra pin out is standard for most radios.

Stock - 1- Shield (Ground) 2- Yellow (Audio) 3- Red (Transmit) 4- White (Receive)

Astatic - (4 wire) 1- Shield 2- White 3- Red 4- Black

Astatic - (6 wire) 1- Shield & Blue 2- White 3- Red 4- Black Yellow NC

Daiwa EM-500, Cobra, CA Series - 1- Shield & Black 2- Red 3- White 4- Blue

Galaxy DC-521S - (4 wire) 1- Shield 2- Yellow 3- Red 4- Black

Galaxy CB-660EI - 1- Shield & Black 2- White 3- Red 4- Blue

Sadelta - 1- Shield 2- White 3- Brown 4- Green

Turner - 1- Shield & Red 2- White 3- Blue 4- Black Yellow NC

Jul 12, 2011 | Magnum DeltaForce CB Radio

1 Answer

How do i wire a 4 pin wire turner 350 hand mic to a cobra 5 pin radio


hi the easiest solution i find is to keep the ptt pressed remove wires from connector ,then place connector in radio try two wires at a time you will finally get the transmit wires then all you need is the audio ,you can flick over to ssb to sort the audio hope this helps you goodluck

Feb 04, 2011 | Magnum DeltaForce CB Radio

2 Answers

I have a turner plus 3 mic with 4 wires red,black, ground and white. i need to wire it to a 5 pin uniden washington radio, looking for a wiring pattern with pin number to wire color


Here are 2 way's
1- white
2- shield
3- black
4- red
5- blue
yellow is not used.
if this dose not work try moving the red wire to pin 5 and the blue wire
to pin 4

Mar 04, 2009 | Uniden GRANTLT 40-Channels Base CB Radio

1 Answer

How do i wire a expander 500 to a cobra 2000 gtl


I can't remember if the 2000 is a 4 pin mic, If it is the wiring will be 1 Sh/Red 2 White 3 Blue 4 Black ;Yellow not used.

Feb 20, 2009 | Magnum DeltaForce CB Radio

1 Answer

The wires came of the plug of my Cobra Road King 58 mic. I need the wire diagram to put them back on.


if you have a cobra radio with four pin input and a turner road king 56 it goes like this. pin one shield and red wire,pin 2 white,pin 3 blue,pin 4 black and tape up the yellow wire it isn't used. the numbers should be on the plug if not look inside your jack on your radio. hope this helped

Dec 17, 2008 | Radio Communications

5 Answers

Cb mic wiring


I have a browning golden eagle mark II. It has a two pin mic plug. I would like to hook up a astatic power mic to it. Anyone have an answer?

Oct 07, 2008 | Magnum DeltaForce CB Radio

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cobra Radio Communications Experts

AnyMHz.com
AnyMHz.com

Level 2 Expert

500 Answers

Brad Brown

Level 3 Expert

16026 Answers

yadayada
yadayada

Level 3 Expert

76673 Answers

Are you a Cobra Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...