Question about Office Equipment & Supplies

Open Question

I am trying to make buttrick pattern B6321. and havintrouble with tth flap and faceing

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pattern 8024 dress B skirt back facing finish


Not sure what your question is. To finish the facing raw edge, you can turn it and topstitch it, pink the edge, or if you have a serger, just serge the edge.

https://en.wikipedia.org/wiki/Facing_(sewing)

sewing101 facings see kate sew

How to Use Interlining Lining Facing and Interfacing

4 BEST ways to make FACING pattern and sew it Sew Guide

Jan 21, 2017 | Sewing Machines

2 Answers

Instructions for pattern B4110


try searching for them by the pattern maker name on Google

Dec 13, 2016 | Sewing Machines

2 Answers

How I match an old pattern of decorative wallpaper hung circa 1990's? Is there a company that can ID old wallpaper from a photo?


wall paper patterns change with the fashion and times
it is unlikely that you would get the pattern off the net as the pattern would be continually updated
I would try face to face with wall paper/ decorator shops with a good photo of the pattern as they may still have the pattern books somewhere in storage

Jun 27, 2015 | Tools & Hardware - Others

1 Answer

Just replaced battery but dont know how to reattach ribbon cable on nuvi 200


flip locking flap on connector away from the gold pins. Slide the ribbon cable into the connector on the side with the gold pins as far as it will go. The ribbon goes face down with its gold pins facing down. Then using two fingers flip the locking flap down and toward the ribbon cable. It should click. Be careful, if you snap the flap it is game over.

Jul 31, 2013 | Garmin nuvi 200 Car GPS Receiver

1 Answer

William.buttrick@yahoo.co.ukI have a Praktica dc44 without a smart card which one do I need


The DC44 uses SD cards. Don't worry about the speed of the card and stick with the major brands.

Jul 27, 2011 | Praktica Cameras

1 Answer

How do we connect the dance mat to the Wii console for DDR 3?


How do I connect the mat to the Wii™?





If your Wii™ is standing upright with the power button facing you at the top left, the top skinny side of the Wii™ that points up towards the ceiling contains the flaps. Lift the flap up, like how you would open a book, on the top of the console. You will find the ports under this flap. Plug your mat into the port that is the closest to where you would stick in the disc.
If your Wii™is laying flat horizontal, with the disc slot going left and right, and the power button facing you at the bottom left corner, the left skinny side of the Wii™that faces towards the left contains the flaps. Flip the flap down towards the left and you should see the 4 ports. Plug your dance mat into the port that is closest to the front of your Wii™ where you would stick in the disc.
Other steps to make sure you have tried:
Make sure that your Wii™ is turned off before plugging in your mat.
Also, make sure the connection is secure to your console.
Then with the game in the Wii™, turn on your console.
The mat should be recognized at that point.






Mar 22, 2010 | Konami Dance Dance Revolution Hottest...

1 Answer

I have metro pcs phone how do i hook up blue tth


I have metro phone made by ZTE I need a code for pairing up the MotorolaH 350 with my ZTE phone what is it?

Feb 15, 2010 | Jabra COMMUNICATIONS BT160 Bluetooth...

1 Answer

I would like to update my maps..I am connected but nothing has happened


You need to be running tom-tom home on your computer.

Also make sure it is the latest version for your device.

Use the add/remove programs to UN-INSTALL any previous version

Then go get the new version but when it asks if you want to run / save / cancel

Select SAVE and save it on your hard drive in a place you know how to get to.

Run it from there.

make sure that TTH is running on your computer before you connect the GPS.

Connect the GPS and then power it up.
It will ask if you want to connect to the computer so touch YES

TTH will then kick in and if the option to auto update was ticked it will do just that.
It may take some time so don't switch off ! !
If it did not auto update there is an option on the TTH screen to do it. Again it may take some time so DO NOT SWITCH OFF !

Sep 04, 2009 | Tomtom ONE GPS Receiver

1 Answer

Tom tom one version 2.2


Try this.
Run TTH without your unit connected.
Click on update my device (or any other process that you need TTH to perform).
You will then be prompted to connect and turn on the tomtom.
Connect and power up the device, if it asks you if you want to connect to computer, select yes (it does not always ask).

Feb 16, 2008 | Tomtom ONE GPS Receiver

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...