Question about Car Audio & Video

1 Answer

KENWOOD 9-BAND EQ DOES NOT POWER ON, i have all 3 wires connected and nothing, eq does work i had in different car, but wont power on at moment

Posted by on

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 113 Answers

Hi try earthing the chassis of the unit as well to ground with a wire. Sometimes units have to grounded all round. Check the inline fuses also to be sure

Best of luck

Posted on Jul 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need data sheet or user manual for my pioneer graphic equaliser


If is a parametric equalizer is zero watts. ,pionner should have a front, rear and subwoofer connections. If i remenber correctly, a single rca going to your stereo and the rest from eq to amp or amps. Hope this helps ,hope you get WIRED.

May 15, 2013 | Pioneer EQ-6500 9-Band Car Equalizer

1 Answer

Need wire diagram for pioneer eq-6500


Pioneer EQ-6500 9-Band Car Equalizer .i want to buy this equaliser.i need 10 pieces ,please send me through my email febiano22@yahoo.com

Nov 24, 2010 | Pioneer EQ-6500 9-Band Car Equalizer

1 Answer

Ignorant


POWER SOURCE
REMOTE
12VOLT POWER
GROUND//
AND RCA IN FROM DECK AND RCA OUT FROM EQ TO DECK

Jun 25, 2009 | Pioneer EQ-6500 9-Band Car Equalizer

1 Answer

I understand the diagram with the +12v and the gnd wires, but does the third wire only work with other Kenwood products? It appears to be a "sense" wire or similar that feels the presence of a powered-up...


Hello davec99,

The third wire is commonly called a "remote" wire and is used to turn on other devices, such as an amp, connected to the audio system. When the equalizer is off, there's no signal on the wire. When the equalizer is on, a low current 12V signal is on the wire, signalling the remote device to turn-on.

Hope this helps.

Jun 12, 2009 | Kenwood KGC-4042A 5-Band Car Equalizer

2 Answers

Power supply connection for pioneer eq-6500


top left - orange.....goes to aux or memory wire
top right - blue.......goes to the remote wire used with amps
bottom left - black.......goes to the ground wire
bottom right - red........this goes to your hot wire

May 31, 2009 | Pioneer EQ-6500 9-Band Car Equalizer

1 Answer

Power unit on test for Kenwood kgc 7043


should not need the head unit.open up unit and start testing continuity along wire an board.possible break in connection.

Feb 24, 2009 | Kenwood Car Audio & Video

1 Answer

Best settings on a 9 band eq for rock and r&b


Provided the rest of your system is all tuned an in proper shape, and up for the wattts, the best sound to set, starting with the low end...start with is a slightly elevated above zero (about 1/4 up from zero) then slowly gradually slope it down to 1/4 below zero in middle and then back up to 1/4 above at the high end.

The result is a gently curved V type shape.

Now, knock down the highest 2 or 3 freq bands a few clicks till they are just above zero. (1/8).

This is the curve you would shoot for with a real-time analyzer for SQ, punch and clarity.



Feb 11, 2009 | Kenwood KGC-6042A 9-Band Car Equalizer

2 Answers

Power connection


Theres supposed to be a harness that plugs into that connector. It will have the international color standard wires. Contact a kenwood dealer to get the harness.

Sep 14, 2007 | Kenwood KGC-6042A 9-Band Car Equalizer

1 Answer

Which wire is power and ground


generally red is the ignition wire, black is ground, orange is 12+ all the time, a yellow could be the same....it would be more helpfull if you would give the model number of the eq

Jul 13, 2007 | Kenwood KGC-4042A 5-Band Car Equalizer

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4869 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...