Question about Televison & Video

1 Answer

Digital stream converter code for echostar 20.1 i have tried all i could find online with no luck. also should i program it under aux mode?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Televison & ... Master
  • 74,106 Answers

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://homenol.blogspot.com/
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts. .

Posted on Apr 22, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Ineed a code for tv converter box,What would the code be for a tv converter box ?


Different brand converter box will have differen tset-up codes. Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts.

Jan 11, 2017 | Televison & Video

1 Answer

I need code for digital stream box for a trinatron tv


Faq - digital stream technology, Inc. ( digital stream ...

www.dsconverter.com/index.php?p=5
Can I use my Universal Remote Control to operate the converter box? ... Do I need a special antenna to receive digital or high-definition TV? .... Note: If you want to reset the remote back to the beginning of the TV code list, clear the memory by ...

Installation - digital stream technology, Inc. ( digital stream ...

dsconverter.com/index.php?p=3
Connecting the DTV Converter Box to your Analog TV Set with RF cable · - Connecting the DTV Converter Box to your Analog TV Set with Audio/Video cable

Digital Stream Analog Pass-through DTV Converter Box

www.amazon.com/Digital-Stream.../B001TO3L8Y

Amazon.com, Inc.
Rating: 3.4 - ‎131 reviews
Digital Stream Converter Box Remote DTX9950 ... RCA DTA-800B1 Digital To Analog Pass-through TV Converter Box ... I think the bad capacitor is something like a 16 Volt capacitor, and you have to replace it with a ... remote(I was able to find the code for my old JC Penny TV), a seperate button for channel signal strength, ...

Amazon.com: Customer Reviews: Digital Stream Analog ...

www.amazon.com/Digital-Stream.../B001TO3L8Y

Amazon.com, Inc.Digital Stream Analog Pass-through DTV Converter Box ... the code for my old JC Penny TV), a seperate button for channel signal strength, ... My brother somehow found out that there have been many of these Digital Stream boxes that were .... button that you can program into your tv (mine is a 1990's 11" Sony Trinitron).

Jan 14, 2016 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Thomas Faust,


Ron,

I am not sure which codes were used, but you can check out http://www.mydish.com/support/apps/remotecodes.aspx to view our entire list available. I am unsure if the AUX mode will work with the OTA converter. I have listed the steps below to do a power scan which lets it go through all available codes. If you have a model 20/21.0 remote, you can also utilize the learning function on the remote.

With the OTA Converter on, press and hold the AUX mode button (about six seconds) on the top of the remote until all mode buttons light up, then release. Press 2, then press STAR (*)

Press the Up arrow button once per second while pointing the remote at the converter. If the code for it comes up, the equipment power off.

When it does, press the POUND (#) button. If the code entered is valid for the remote, the mode light will flash three times. To verify the code works try several different functions for that equipment.

Tommy Faust
DISH Social Media Representative

Apr 19, 2013 | DISH Network ViP 211K

1 Answer

What code to use for a 5.4 ir echostar dishnetwork remote


Hi there, Cheri Torres with DISH Network Customer Service here. I came across your post and wanted to help. I will list here for you the best codes for a 5.4 IR remote to try with a Go Video DVD/VCR combo. I hope this information is useful and if you have any other questions please let me know.

5.4 IR remote - 1693, 1822, 1569, 1692.

Instructions for addressing the remote to the DVD/VCR combo
1. Press and hold down the AUX button until all the mode buttons light up red.
2. Enter the four digit code.
3. Press the pound(#) button once.
4. Try the functionality of the device.

Oct 12, 2011 | GoVideo Go Video DVD/VCR Combo

1 Answer

I want to program my Magnavox TB110MW9DTV Digital analog converter box to the aux button on my Dish network 4.0 IR/UHF PRO remote. I can't find a code to program this. I have talked with Dish and I have...


Hey there, Cheri Torres with DISH Network Customer Service here. We unfortunately do not have any codes for our DISH network remote controls that will program a Magnavox digital converter box. An option you can try is a power scan which will basically find the code for you in some cases. I will list here for you the instructions for addressing your DISH remote to your converter box. I hope you find these instructions helpful and if you have any other questions feel free to post back here and I would be happy to help.

Instructions for performing a power scan
  1. With the desired equipment on, press and hold the AUX Mode button until all mode button back lights illuminate, then release.
  2. Press and release the # 2 then the STAR (*) button.
  3. Press and release the Power button.
  4. Press the Up button once a second while pointing the remote at the desired equipment. Note: If the code for the equipment comes up, the equipment will power off.
  5. Press the POUND (#) button as soon as the desired equipment powers off. Note: If the code entered is valid for the remote, the mode light flashes three times.

Apr 09, 2011 | DISH Network IR Remote Control

1 Answer

I have a zenith tv , n i have a digital stream converter box connected , the remote. Got un programmed i need.the code to program the remote to the tv , can you help me ?


HI,

Direct Code Entry:

Find the code your device.


1. Press and hold "CODE SEARCH".


2. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.


3. Enter the 3-digit code number.


4. Release "CODE SEARCH".


5. With the device on, press another button to test (volume control/power button).If it does not work, repeat steps 1 to 5 with other codes which you have.

follow the below steps to set remote without codes


Code Search:

1. Turn on the device you wish to control.

2. Press and hold "CODE SEARCH".


3. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.


4. Release "CODE SEARCH".


5. Press ON/OFF repeatedly until the device turns off.


6. When the device shuts off press and release ENTER.


7. Try using the remote. If it does not function repeat steps 1 through 6


To Get The Code Please Go To Below Website:

http://www.rcaaccessories.com/remotefinder/

You need to select the following information from the drop down list

1.Model of the remote
2.Type of device to which you want to program(TV/DVD/VCR)

Thank you

Aug 04, 2010 | RCA 3-Device Universal Remote

4 Answers

Trouble programming Universal Remote to a DTV Converter Box...


Not a complete solution, but, around the last page (pg. 14) of your converter box manual there are codes listed for universal remotes. I happen to have a Philips remote that is listed. My code to control my dtv box is 0354. It appears that they have all codes listed for all Radioshack model universal remotes. I would suggest getting a Radioshack remote for Your "Digital Stream" (Radioshack) dtv box...

Apr 21, 2009 | GE JASRM24912 Remote Control

2 Answers

I need the code for an echostar remote ir103602


How to Program a EchoStar Remote Control
Instructions

Step1
Ensure that the remote control has new batteries installed. If you are not sure or have been using the device for a while, go ahead and insert fresh batteries. You need four AAA batteries.
Step2
Locate the mode buttons on the controller. You will see SAT, AUX, TV, and VCR. SAT stands for the satellite receiver. Your remote is automatically set up to work with your EchoStar receiver, and you do not need to program it for this function. AUX may refer to a cable television device or an audio device that hooks it into your stereo system. TV refers to your television set. VCR may be chosen to control a standard VCR or a DVD player.
Step3
Press the mode button that corresponds with the device which you want to control with the EchoStar remote control. For example, if you want to program the remote to control the TV, press down the TV mode button.
Step4
Turn on the device. This is the item you want to control with the EchoStar remote. You may need to do so manually or with its own remote control. In this example, you would turn on your television set with its own control.
Step5
Press down the EchoStar mode button for the device again, but this time hold it down for three seconds. You are going to notice that all the other mode buttons are going to flash on. Aim the remote at the device you want to control.
Step6
Depress the EchoStar remote power button briefly and then slowly click either the up or the down arrow button. You are performing a code scan that allows the remote control to run through all the preprogrammed codes that are stored in its memory. Proceed slowly and do not hurry this process. It may take a few minutes, but it is virtually foolproof.
Step7
Stop when the appliance you want to control with the EchoStar remote control suddenly turns off. You have hit upon the correct code, and if you save it now, your remote will be able to use it in the future to control the functions of the item.
Step8
Store the code in the EchoStar remote control’s memory by pressing the pound button. You will notice that the corresponding mode button is going to flash, acknowledging the programming choice. You are now ready to control the item with the EchoStar remote control.

Aug 28, 2008 | Televison & Video

1 Answer

Apex Digital GB4308 remote


Programming the Remote Control Remote-control switchover Press VCR/DVD, SAT/CABLE or AUX to select the device you want to control. To program the remote control Press and hold VCR.DVD, SAT/CABLE or AUX for over 2 seconds until the LED on the remote control turns off. Release the button the LED will light again (the remote control enters the PROGRAMMING mode). Enter three-digit code number for your equipment. If the correct code number is entered, the LED blinks three times. If you enter a code not listed below, or you press any other buttons than SEARCH and 100+, the LED turns off. To search codes Press ad hold VCR/DVD,SAT/CABLE or AUX for over 2 seconds unil the LED turns off. Release the button (the LED wil light again) and the remote control enters the PROGRAMMING mode. Press SEARCH. Press CH+/- to search codes downwards or upwards. Each time you press CH+/-, the code number decreases or increases by 1 while the remote control sends the code number for POWER button on your device. If the desired code number is found,press 100+ to program the code for your device until the LED blinks three times.Then the remote control exits from the PROGRAMMING mode and returns to norml operation. Or press any other button to exit from the PROGRAMMING mode after the LED blinks rapidly eight times, and the operation is not active. To check the current code number Press and hold VCR/DVD, SAT/CABLE or AUX for over 2 seconds until the LED turns off. Release the button (the LED will light again) and the remote control enters the PROGRAMMING mode. Press 100+ . You may read the code numder according to the LED display status as follows. * If there is no operation within 20 seconds during the steps mentioned above, the remote control will automatically exit from the appropriate operation. Code Number First - digit 0 1 0 1 Second - digit 0 0 4 5 Third - digit 0 6 3 0 First - digit Blinks rapidly once Blinks once Blinks rapidly once Bliks once Secod - digit Blinks rapidly once Blinks rapidly once Blinks four times Bliks five times Third - digit Blinks rapidly once Blinks six times Blinks three times Bliks rapidly once

Jan 05, 2007 | Apex Digital GB4308 43" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

Cindy Wells

Level 3 Expert

5096 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...