Question about Televison & Video

1 Answer

Soniq remote not working the power had been turned off to the Tv and now remote not working Has happened before but read to disconnect arieal and batteries from remote press buttons and it re sync

The remote is QT1D cannot remember what buttons on the remote to push

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Televison & ... Master
  • 74,459 Answers

Check the remote control for its infrared emission. Check it with fresh batteries. Check it by pressing all the keys. You can detect the presence of infra-red emission from the remote control, using a cell-phone camera. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. In some cases, the remote control might need to clean.
http://electronicshelponline.blogspot.com/
http://remotesearch.blogspot.com/
Search the site by type in this key phrase "how to test a remote control "in the "search box at the top right of the display window of the Homepage" to get the related post quickly.
https://youtu.be/wUpnETSm6_k
https://www.youtube.com/watch?v=jsSCNCW3IbQ [open and clean]
https://www.youtube.com/watch?v=Qp-l1uh-5gE [open and clean]

Posted on Apr 22, 2017

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Samsung remote is BN59-01134B. I cannot remember how to program it to my TV I don't remember the code to program it to my TV I'm totally lost please help


Try Pairing procedure:
  1. TV off
  2. Bring remote within 3 feet of TV
  3. Push Pairing button (Paper Clip or other pointed object in button hole)
  4. Turn on TV
  5. Should be paired. Try remote channel or other buttons.
  6. If not, try 2 more times.
  7. If still not working, push RESET button first and repeat Pairing.


003a17fe-21fc-47f6-be08-5bbeec41041e.jpg


samsung-remote-bn59-01134b-cannot-tiee3lbaghb4kteyvqjgelx1-2-2.jpg


samsung-remote-bn59-01134b-cannot-tiee3lbaghb4kteyvqjgelx1-2-3.jpg

Dec 20, 2015 | Samsung Televison & Video

1 Answer

No learn button


It's there, but you may have to remove the large slide switch to see it. The slide switch just pulls off. The learn button is on the right side if the face of the remote box, under the ON side of the slide switch. Make sure you place in the smaller slide switch in the REMOTE Position, before attempting to get it to learn a new code. Remember, you must push the Learn Button (use a small screwdriver or ball point pin refill) to push down on the learn button0 and press the ON button on the hand-held remote at the same time. Listen for a beep(s) and let off of both buttons after the beep(s) stop.

Jan 10, 2011 | Skytech 3301 Thermostatic Gas Fireplace &...

1 Answer

Lost the direct TV signal to the TV when nephew pushed a button on the remote (he doesn't remember which button) The other TVs in the house receive signals per usual.


Your nephew must have pushed the "Input" button on the remote. The TV is now looking for signal at a different input.

On the remote, press the input button until the TV switches back to the correct input. Make sure the satellite receiver is turned on so when the TV lands on the correct input, you will know it.

Dec 17, 2009 | Cars & Trucks

1 Answer

Fuzzy picture on philips dvd player,... i remember it can be corrected by holding done one of the buttons on the remote, but don't remember which one...


When the movie start, push "system menu" in remote control and push again to back to the movie.. Problem Fixed.

Dec 27, 2008 | Philips DVP642 DVD Player

1 Answer

Sony PCS-1 dont remember admin password


1. Access the Setup menu as follows:
Press and hold the MENU button on the remote commander.
2. Select Dial using the �� button on the remote commander.
3. Access the Service menu as follows:
Press 7 then 2 on the remote commander (without pressing the
PUSH ENTER button).
The Service menu appears. (See Figure 1.)
NOTE: To cancel Service mode and return to the Setup menu,
select Cancel using the arrow buttons, and press RETURN

Clear setup and FINISH

Bye Zamani Ali
azamani@iooc.co.ir

Nov 24, 2008 | Sony PCS-1 (PCS1) Video Conference

1 Answer

LG LCD and LG DVD remote codes


If both units are LG you don't have to program anything. Below the power button are 6 buttons labeled TV, DVD, etc. As soon as you push the DVD button the remote should work it. Remember to push the TV button again to make it work the TV.

Apr 20, 2008 | LG 42LC2D 42 in. LCD HDTV

7 Answers

How do i program my remote


Hold button down for unit you want to program. (TV,DVD,VCR) Then hold down on off button at same time. On/off button will turn off then come back on. When this happens push the play button. Wait 10 seconds and then push again. Repeat until unit turns off. Once unit turns off push rewind button one at a time until unit turns back on then push the stop button.

Sep 29, 2007 | RCA RCR311B Remote Control

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...