Question about Home Security

Open Question

Reset my owsoo 16 ch dvr i forgot password

No power or reset button how do i reset

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 43 Answers

SOURCE: Some body was chaged the

Obtain the manual for the mother board. Look for the CMOS reset jumpers the diagrams, it should be three pin with a plastic jumper on two. Move the jumper from the first two pins to the last two pins, then turn on the computer. This will reset the bios. Turn the computer off, then place the jumper back in it's original position so you retain any new changes you make.

If that is not possible, or seems over your head, look for a button battery the between the size of a nickel and a quarter. It usually lies flat on the board, but sometimes is mounted standing on its edge. Pull this battery out of the board while the power cord is unplugged. Press the power button a few times, then wait a while (I've waited a few hours, but 20 minutes or so should be enough.). Without replacing the battery, plug the power cord and turn it on. CMOS should be reset, allowing you to do what you need.

Posted on Apr 12, 2011

Testimonial: "thank ' s very much "

Ad
  • 1 Answer

SOURCE: i need reset the password

I have a H.264 Network DVR with ver. V2.00.R05 and I've forgotten the password can anyone help with resetting it...
Mikw

Posted on Jul 30, 2011

SD Tech
  • 14553 Answers

SOURCE: Reset parental controls password for Vizio VBR120 DVR player

Many have a default code like all 9's but you may have to call the maker if not in the owner manual.

Posted on Nov 01, 2012

  • 37 Answers

SOURCE: how to reset my dvr provision isr 16 ch

open it up and see if there iis a little battery if not try a hard reset

Posted on Jul 23, 2014

SOURCE: I have a CCTV DVR that I've lost the password to, can anyone help in resetting it. It is a DVR 16 Channel VU1621. H.264 V2.82.R09

Inside, you'll find a small button cell. Remove it, and leave the machine switched off for a few hours. When you replace the battery and switch the machine back on, the password will be reset.

Posted on Feb 10, 2015

Testimonial: "Hi, I have tried removing the battery by leaving out over night, the date and time reset but the password is still the same"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MX300 waste ink full


1) With the machine power turned off, while pressing the Stop/Reset button, press and hold the ON/OFF button. (DO NOT release the buttons). The Power LED lights in green to indicate that a function is selectable.

2) While holding the ON/OFF button, release the Stop/Reset button. (DO NOT release the ON/OFF button.)



3) While holding the ON/OFF button, press the Stop/Reset button 2 times, and then release both the ON/OFF and Stop/Reset buttons. (Each time the Stop/Reset button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED

4) When the Power LED lights in green (and "ServiceMode Idle" is displayed on the LCD), press the Stop/Reset button the specified number of time(s) according to the function listed in the table below, then press the ON/OFF button. (Each time the Stop/Reset button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED



1) In the service mode, press the Stop/Reset button 4 times to enter the ink absorber counter resetting mode

.
2) In the ink absorber counter resetting mode, press the Stop/Reset button the specified number of time(s) according to the kind of ink absorber whose value should be reset to 0%.

Aug 13, 2014 | Canon PIXMA Office Equipment & Supplies

Tip

Reset Canon Pixma MP140


first you must know this information before starting:mabroukmedal_17.jpg

  1. Plug the printer to the power source
  2. press and hold the stop/reset button
  3. press the power button
  4. if the power led light, press two times the stop/reset button
  5. release the Power button and the stop/reset button
  6. wait, when the power led is green, press the stop/reset button 4times to reset wase ink counter.
  7. unplug the printer from the power source
  8. plug the printer again to the power source and power it on
  9. the counter is set to zero.

on Nov 30, 2010 | Office Equipment & Supplies

2 Answers

Reset canon printer MP500


Call canon tech support for any of issue in printer you can them directly here is the number (877-690-9305)

Jul 26, 2014 | Canon Pixma MP500 All-In-One InkJet...

1 Answer

Hard reset button


Go for hard reset
  • With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
  • When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
  • When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
  • When the LED lights in green, press the Stop/Reset button 4 times

Oct 23, 2013 | Canon MG5250 Printer

1 Answer

Errer code 5


1/ Turn off the canon printer
2/ Hold down the Stop/Reset button
3/ Not releasing the Stop/Reset button, hold down the Power button, now release the Stop/Reset button
4/ Not releasing the Power button, double click Stop/Reset button and release both the Power & Stop/Reset button - doesn't matter in which order
5/ Click Stop/Reset button four times
6/ Click the Power button to confirm the selected action (reset counter absorber)

Aug 02, 2011 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

How to reset Canon mf4150


Hello and welcome to FixYa!
The manual reset Method for
Canon image CLASS MF4150 All-In-One Laser Printer is given below, Follow every step carefully:

  • Press and hold STOP/RESET button.
  • Press and hold POWER button.
  • Release STOP/RESET button without releasing power button.
  • Click STOP/RESET two times and then release power button.

Now your printer enter into service mode. Now

  1. Prepare paper on the paper tray
  2. Press Stop/reset button for 1 times and then press power button, await till printer finished print.
  3. Press Stop/reset button for 2 times and then press power button, await till printer finished print again.
  4. Press Stop/reset button for 3 times then press power button to reset EEPROM.
  5. Press Stop/reset button for 4 times then press power button to reset Waste Ink Counter.
  6. Switch off the printer. if printer doesn't turn off, press button power until printer off.
You have done it
If any Further assistance required, I am here to help
I hope this solution helps you.

Your token of appreciation in the form of Rating as FOUR THUMBS (given below to this solution) and testimonial will be esteemed.
Thank you for Using FixYa
!

Apr 10, 2011 | Canon imageCLASS MF4150 All-In-One Laser...

4 Answers

Canon MP145 error E27


  1. plug off power cable
  2. press and hold stop/reset button
  3. plug on power cable
  4. press and hold power button(still hold stop/reset buttn)
  5. still hod power button, loose stop/reset button
  6. press stop/reset 2X then loose power button, wait until 0 displayed
  7. press stop/reset 1X
  8. press power button 1X, printer will print 1 time
  9. press stop/reset 2X
  10. press power button 1X,printer will print 1 time
  11. press stop/reset button 3X
  12. press power button 1X ( no print proses)
  13. press stop/reset 4X
  14. press power button longer than before for turn off printer, if print not turn off plug off power cable
  15. turn on printer and error 27 will disappear
i hope this helpfull
thanks for using fixya

Jan 25, 2011 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

After replacing the ink cartridge printer still shows cartridge levels at 0%


Hi

You have to reset the cartridge

To Reset the HP Cartridges Works 100%

Power off the printer
Hold the stop/reset button then press and hold power (for 5 secs)
Hold Power and release the stop/reset button
Press the stop/reset button twice
Release power button
Wait until the power button lights a steady/still green, press the stop/reset button three times with a 3 sec space between each press.
On the 3rd press the indicator should be orange.
Press the power button to set data
To set data remove cartridges then replace.
leave for 20 or 30 secs
Press the power button again to shut down
Then press power button to power up.
The printer will feed one piece of paper through
then set language and counrty.
Then ink should be reset

Thanks


Aug 15, 2010 | HP Office Equipment & Supplies

1 Answer

How do I reset printer after putting ink cartridge in


To Reset the Canon Cartridges Works 100%

Power off the printer
Hold the stop/reset button then press and hold power (for 5 secs)
Hold Power and release the stop/reset button
Press the stop/reset button twice
Relase power button
Wait until the power button lights a steady/still green, press the stop/reset button three times with a 3 sec space between each press.
On the 3rd press the inicator should be orange.
Press the power button to set data
To set data remove cartridges then replace.
leave for 20 or 30 secs
Press the power button again to shut down
Then press power button to power up.
The printer will feed one piece of paper through
then set language and counrty.
Then ink should be reset

Please rate my rsponse!!

Jan 29, 2010 | Canon PIXMA MX310 All-In-One Printer

1 Answer

Reset To551 ink cartridges


Hi,

  • Power off the printer
  • Hold the stop/reset button then press and hold power (for 5 secs)
  • Hold Power and release the stop/reset button
  • Press the stop/reset button twice
  • Relase power button
  • Wait until the power button lights a steady/still green, press the stop/reset button three times with a 3 sec space between each press.
  • On the 3rd press the inicator should be orange.
  • Press the power button to set data
  • To set data remove cartridges then replace.
  • leave for 20 or 30 secs
  • Press the power button again to shut down
  • Then press power button to power up.
  • The printer will feed one piece of paper through
  • then set language and counrty.
  • Then ink should be reset
Please rate my sesponse!!
Thanks, SF

Jan 28, 2010 | Office Equipment & Supplies

Not finding what you are looking for?
Home Security Logo

Related Topics:

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Home Security Experts

Brad Brown

Level 3 Expert

17155 Answers

yadayada
yadayada

Level 3 Expert

79865 Answers

Lawrence Oravetz

Level 3 Expert

10291 Answers

Are you a Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...