Question about RCA Televison & Video

1 Answer

Need code for my new rca scenium tv for my bell expressvu remote I do not have fibe tv

Posted by on

  • 1 more comment 
  • holly nickols
    holly nickols Apr 21, 2017

    any answers I don't have fibe tv

  • holly nickols
    holly nickols Apr 24, 2017

    Thanks for the codes but they do not work i tried all of them

  • johnny rebel Apr 27, 2017

    Programming an Expressvu remote control can be frustrating. There are two basic ways of doing in it. The first one involves knowing both your TV brand name and also knowing the proper code to input in your remote. The second method is doing an automatic search. The following is a step by step procedure in how to program your dish network or Expressvu remote.

    1)Make sure your TV and Satellite Receiver is ON.
    2)Press and hold TV button until all lights on the side of it flashes. The TV button is the second button on the Top left hand side corner of the remote control.
    3) Release that button, then press & release RED Button. You will notice TV button is stays on. If, it doesn't stay ON, you must repeat step 2 & 3. Otherwise, your batteries are low, you MUST change then.
    4)Press and release the UP Arrow Key on the remote until TV turns off. Notice the UP arrow key button is the button below the volume keys (Stop button for VCR.)
    5)Make sure you are aiming remote control to TV while pressing and releasing UP arrow key button. When you find the right code, the TV will turn OFF.
    6) Immediately after, TV turns off, press # key.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 604 Answers

RCA 503 505 548 630 633 634 636
641 645 646 648 650 651 652
653 654 656 661 663 665 667
668 670 691 698 701 708 715
716 725 742 763

Posted on Apr 21, 2017

  • holly nickols
    holly nickols Apr 27, 2017

    Used all the codes and it doesn't work

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tv codes


I am assuming you are using the bell Fibe TV system. The best option to program the TV code onto the remote control is to go to this site and select the remove control you have.
http://support.bell.ca/Fibe_TV/Receivers/How_to_program_my_Bell_Fibe_TV_remote_control

You will then need to find out what code applies to your TV as you have not provided the make and model for it.

Aug 29, 2014 | Televison & Video

1 Answer

Crcrps04gr


I need a code list to program my tv it's a rca I have this remote crcrps04gr

Feb 24, 2013 | RCA RCR412B Remote Control

1 Answer

Need remote code for programming a bell expressvu receiver


Here for the Jensen remote just click below;

Here is link to the manual:

http://www.remotecodelist.com/remotes/jensen/JR300C.pdf


Here is some helpful information I found:
Without the code on JER-323:
1.Manually turn on the component you want the remote to control.
2. Press the device button, example:( TV) and the (power button) for 3 seconds until the (on/off button stays lit).
3. Once the (on/off) button is lit, press the (on/off) button until the unit (the TV or unit you are trying to control.) turns off.
4. When the code is located, press the (stop) button at the bottom to save the code.
Here are some codes I found for the Jensen 323:
GE VCR: 2000, 2013, 2021, 2022, 2053, 2087, 2089, 2091, 2115, 2120
Motorola Cable Box: 5000, 5003, 5046, 5047, 5052
Mitsubishi TV 0093, 0150, 0178, 0019
JVC VCR 0067, 0041, 0008
JVC DVD 0558, 0623

Hope it may help you;

Regards,
VOTIT

Jan 27, 2009 | Jensen 143307 Remote Control

4 Answers

Codes to program Innovage Products Jumbo Universtal Remote


Innovage Jumbo remote codes for RCA TV; 000, 003, 004, 005, 007, 009, 011, 015, 048, 082, 092, 094, 096, 098, 102, 103, 107, 113, 125, 129, 167, 179, 187, 188, 191,194.
Pansonic DVD; 175.
Pansonic VCR; 021, 060, 115, 125, 138, 148, 149.
Philips DVD; 173, 183, 198.
Bell ExpressVu; 168, 187, 194.

Dec 18, 2008 | Televison & Video

1 Answer

Codes to program Innovage Products Jumbo Universtal Remote


Try this site;


http://www.blurtit.com/q717681.html


Good luck

Mar 03, 2008 | Televison & Video

2 Answers

Replacement remote for bell expressvu


Here is the link to pdf document: http://www.highspeedsat.com/pdf/satellite-tv/expressvu/remote.pdf

Feb 14, 2008 | DISH Network IR Remote Control

1 Answer

Codes to program Innovage Products Jumbo Universtal Remote


I need the code for my rca tv so I can program the inovage jumbo universal remote Pleaseeeeeeeeeeeeeeee

Dec 31, 2007 | Televison & Video

1 Answer

Program bell expressvu remote for new tv


The easiest way is to do device code scan. Since you want to program the TV, hold the TV button on your bell expressvu remote. When all the top buttons light up, press the power button, the TV button light should remain lit. Keep pressing up/down until your TV turns off. When your TV turns off, press the # button. Thats all. Your done.

If you want to set up the AUX button, hold the AUX button until all the buttons light up. Then press * and either

0 - second TV
1 - second VCR/DVD player
2 - audio amplifier or cable box

Then press the power button and press up/down until the device turns off. The last step is to press # and your done.

Oct 22, 2007 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

matt martin
matt martin

Level 3 Expert

1212 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...