Question about Intex Pool & Spa

1 Answer

I bought my intex spa model #28413 4 person octagon the end of may 2016. I can not get the pump to reset. It works in all modes except heat .I have taken the pump off and on the tub 4 times trying to reset but I think it is the heating element that is erroring out. Please help how do I reset the pump? Is it still under warranty

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Master
  • 12,744 Answers

Your problem is the pump what usually happens with the pump is the ceramic shaft that holds the pump impeller in place breaks and intex doesnt sell replacements --you can take it appart only need a phliphs head screw driver there are online videos on how to do a repair but only if shaft is not totally broken --simple way is to go to home depot and by the weldin g tools is a case of welding rods m--i believe their 3/16 flux brass for brazing for like $9.99 cut the rod to lenth around 3" and clean off the flux and reassemble the pump the rod is non magnetic
Intex pure spa review and problems

Posted on Apr 21, 2017


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My intex inflatable spa keeps beeping a minute after I turn it on after that none of the buttons will work except the jet button for the bubbles

The controller module is messed up, and needs to be replaced, call intex customer service for a new one.

Mar 14, 2016 | Intex Pool & Spa

1 Answer

Intex purespa displays current water temp but will not turn on or start filter/bubbles. Bought 1 mo ago: just set it up a week ago. Was working fine for 1 week. TrI'd unplug and reset. Any ideas??

is displayed temp less than 2 degrees than setpoint temperature ? its possible this situation will disallow the pump to go to high speed and the air infusers to work till spa heats back up , or can be a heater fault as well

Aug 15, 2015 | Intex Pool & Spa

1 Answer

My intex pump jets won't reset or turn off the heater is on but so are the jets can't get jets to go off unless unplugged then you lose the heat.

Sounds like bad controller?

Do you still have problem?
Use Comment link on this thread, and inform this forum what you may gave done this far?
Did you fix it? Did Intex help? What was problem?
if not...
Support Intex

Dec 23, 2014 | Intex Pool & Spa

1 Answer

Why won't my intex spa heat?

is the recirculation pump running if so check filters or it could be tmp sensor

Aug 04, 2014 | Intex Pool & Spa

3 Answers

E96 on intex spa pump

I do not know what that error code is however I can tell you most of those kinds of spa take around 24 hours to heat up.
What model name of Intex Spa do you have?

US Parts Center

Apr 12, 2014 | Intex Pool & Spa

1 Answer

How long do you leave the pump on a15x36 swimming pool.

While Intex recommends turning pumps on and off periodically, I have owned Intex pools three times and run the filter and pump constantly except when persons are in the pool.

My children unplug the system from the house outlet far away when they are about to enter and plug it back in after they are completely dry.

If this is not the best, somebody please tell me. I've never had a pump fail from overuse either.

Jun 16, 2010 | Intex Easy Set Pool 15x36

Not finding what you are looking for?
Pool & Spa Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intex Pool & Spa Experts


Level 1 Expert

27 Answers

Jay Finke
Jay Finke

Level 3 Expert

1383 Answers


Level 3 Expert

4345 Answers

Are you an Intex Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides