Question about KitchenAid KEMC377K Convection / Microwave Oven

1 Answer

Microwave door While trying to fix a broken spring inside the door it fell off and glass shattered. Now I have to put a new one on (it's in the mail today).I cannot find any docs describing the monting of the door hinges. can you "walk" me through it" any ideas will helpAA,

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • KitchenAid Master
  • 8,795 Answers
Re: Microwave door

That would be the service manual. You could contact Kichenaid for that, but I doubt the manual's necessary just yet:

You can find helpful exploded views of this model here:

Unless you're replacing the entire door for some reason (what an expense!) then it's not recommended that you remove the door. If so, you'll have to carefully mark the hinges and the door to be sure you get it back in exact alignment. Otherwise, you'll have a chance of microwave leakage.

Instead, the door panels should be taken apart and then you can remove only the panels and parts that are needed.

In most cases, there is a choke cover on the inside surface that needs to be carefully pried apart, and that will allow access to the hidden screws, as the sample drawing shows.

Usually the exploded view is all that's needed, but if you nned more help, the service manual is the next step.

Posted on Nov 22, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Why did the glass in microwave door shatter melt?

A spoon in the coffee the cup had metal parts

Feb 20, 2015 | Frigidaire Microwave Ovens

1 Answer


That is not that hard to fix and you can easily buy the parts yourselfonline...

Here is a tip that will help you with the online buying...

How to Buy Appliance Parts Online


Sep 19, 2010 | Tecnik TKM0665 1000 Watts Convection /...

1 Answer

Door spring latch broken - how to repair

Inside side of door there are screws that hold glass like a sandwich between outside side and inside side of the door. They are usualy fastened with screws. You have to unscrew and take a part to remove broken latch to replace it with new part.
If you need additional info how to get parts for appliance please do not hesistate to contact me thru this site.2d04cfd.jpg

Feb 21, 2010 | Panasonic NN-T964SF Microwave Oven

3 Answers

Light and door spring

I had a tension rod break in my door as well. There are two of them that cross forming an X and you can see them when you open the door and look in the crack. Fixing them is very easy once you get the outer panel w/ glass and the black molded plastic piece off. WARNING, when you open the door there are two screw on the inside top part of the door assembly. THEY ARE THE ONLY TWO SCREWS HOLDING THE ENTIRE FRONT PANEL/GLASS ASSEMBLY IN PLACE. I found this out the hard way. When the 2nd screw disengaged the whole assembly came crashing down shattering the glass and nearly cut off my toe. Be very careful when taking off the outside panel!!!

Next challenge...the black molded piece that also needs to come off. To remove this take off the piece that surrounds the exhaust tube to get at two screws that are directly underneath the molded plastic piece. After getting that off you have access to the two rod and can get them installed without to much trouble.

Again, be very careful when removing the front panel. My repair went from an 18 dollar tension rod to a $200 dollar front panel and nearly cost me a toe (yes, I was barefoot).

Aug 07, 2008 | KitchenAid KBMC140HSS Convection/Microwave...

1 Answer

Russell Hobbs HOB CTS34 - Faulty glass plate

Door glass broken on russel hobbs 28lt micro wave. Any idea where I can have this replaced. thank you

Mar 15, 2008 | Microwave Ovens

2 Answers

Broken door hook

The plastic cover on the inside of the door is purely push fit.
To force it off I used 2 strong stainless steel dinner knives.
By easing one knife between the internal glass and the plastic cover I managed to spring one corner by using the other knife on the external bottom edge of the plastic cover.
Try concentrating on one end and once this springs out it is easy to free the rest without having to take it off completely.
The hook is simple to do but be careful with the spring.
All in all it took 3 minutes!

Jan 13, 2008 | Neff B7740N0GB Microwave Oven

1 Answer

Microwave door shattered

Give is the entire model # on the sticker inside the microwave and I should be able to help.

Oct 20, 2007 | Neff H7871N2GB Convection / Microwave Oven

Not finding what you are looking for?
KitchenAid KEMC377K Convection / Microwave Oven Logo

614 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

8795 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 3 Expert

6993 Answers

Are you a KitchenAid Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides