Question about Brother Sewing Machines

Open Question

My brother rs-36 wont pick up yhr boobin thread

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

99rannellis
  • 9254 Answers

SOURCE: My brother rs-36 wont pick up yhr boobin thread please can you help

Try installing a brand new needle. Verify the needle is installed with the flat part facing the correct direction.

If has no positive affect, then it's possible the timing is off on your machine. Search for sewing machine timing or take it for service.

Posted on Apr 21, 2017

Testimonial: "thank you for answering my question youre answer is very helpful"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My brother rs-36 wont pick up yhr boobin thread please can you help


Try installing a brand new needle. Verify the needle is installed with the flat part facing the correct direction.

If has no positive affect, then it's possible the timing is off on your machine. Search for sewing machine timing or take it for service.

Apr 21, 2017 | Brother Sewing Machines

1 Answer

How do I engage the boobin to the top thread?


wind thread onto the bobbin
place the bobbin into the carrier pulling the thread around the edge until it goes down the slot and under a flat spring
pull about 6" of thread out
put the holder into the machine
hold the needle thread and turn the machine by hand
in 2 or 3 full rotations the needle thread will have picked up the bobbin thread and you can pull both threads out ready to sew
if it is not happening , take it in for a service as the needle /hook timing may be out

Jun 12, 2016 | Sewing Machines

1 Answer

Everytime I go to sew the thread always knots up


The bobbin thread must go through the bobbin tension guide before it can be picked up to the bed of the machine by the needle thread. There must be a mistake in threading the upper thread or the bobbin thread, or both. There are lots of manuals for sewing machines online and plenty of sewers who can help you in the area where you live. It's not a big problem just go to the nearest sewing store in your area and you'll get lots of help.

Oct 12, 2014 | Sewing Machines

1 Answer

Toyota ra42 RS 2000


May be time to get the machine serviced, typically you should adjust the upper tension. If you don't have a manual for your Toyota you can get one at www.ifixmachines.com http://www.ifixmachines.com/

Jan 14, 2014 | Sewing Machines

1 Answer

Cant get the boobin to wind the thread


Please try to would put the some very very small cloth piece onto bobbin. Otherwise you bought the separate bobbin machine.

Jan 07, 2014 | Brother XL-2230 Mechanical Sewing Machine

1 Answer

My brother pe150 embroidery machine does not pick up bottom thread and wont sew


try changing the needle
rethread the machine--use every thread guide
make sure the bobbin is not warped
make sure the bobbin is inserted correctly in the case
it's very possible that the timing of the machine is off & the machine would need to be checked at a sewing machine shop

Mar 20, 2012 | Brother Sewing Machines

1 Answer

Wont pick up bobbin thread


1.check needle to see if it's bent or blunt end
2.check bobbin & bobbin case for lint or loose thread
3.could be a timming problem- would have to be serviced

Jul 28, 2010 | Brother LS-2125 Mechanical Sewing Machine

1 Answer

Boobin tension is to loose


that means your top tension is incorrect, be sure to make sure your machine is threaded correctly and that your tension assembly is working correctly,,,,,,easy fix!

Jan 22, 2008 | Brother LS-2125 Mechanical Sewing Machine

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

Irene Tulloch

Level 2 Expert

458 Answers

Are you a Brother Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...