Question about Philips Televison & Video

1 Answer

Philips PFL7603H not turn on. The white light blinking.

Ambilight Chassis Q528.2 E LA. I changed some bloated capacitors in the power supply. During white light blinking all the voltages like okay. But still not turn on. React to the remote control (red light blinking) but relays not working. Py pressing the pwr button on the right side, the relay start and the white light blinking 11 times. No inverter start signal.Then relay turn off. Have you any idea? Thanks.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Philips Master
  • 75,311 Answers

Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/
http://homenol.blogspot.com/
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.
Counting of number of blinks to Philips TVs is entirely different to that of other brand TVs. It is not a direct count procedure. The site have details about how to count the number of LED blinks [Fault Codes] to Philips brand TVs are given; along with details of the faulty circuit location.

Posted on Apr 22, 2017

  • Kaljo Sepp Apr 25, 2017

    Hello.
    Thank You for answer. It's main Board fault. I replaced it to the other similar board. Start work. Picture is negative. Factory settings restored. The menu show me the other software number. I tried to go in to the SDM to change the soft but in strange way this not work. I open The service menu but it is all. No data, no adjusting possible. Have you some idea? May not compatible with T-Con?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dell mini computer power button blinks orange whats the cause?


Hello,

A blicking power light and no boot indicates one of two things. First, an error on the motherboard caused by failed capacitors or two a power supply that is not putting out all of the correct voltages. To check the motherboard look over this article:
http://www.ccl-la.com/blog/index.php/dell-optiplex-745-repair/
If you don't see any bad capacitors then the power supply will need to be changed.

I hope this helps, if so please rate my solution.

BuddyMc

Nov 29, 2011 | Dell OPTIPLEX 745 PC Desktop

1 Answer

Turn power on blu led light after about 5 sec power supply swich off and red led blink 8 times what does it mean? regards


Plasma and LCD TV sets are prone to having capacitors in the power supply section fail. This is the most likely cause for the probem you describe. When capacitors fail your will commonly see one or more of the following symptoms.
  • No video, Power light is on or blinking.
  • TV is making a clicking noise.
  • TV takes a while to come on
  • Screen is very dim or flickers.

Again, You can get a power supply repair kit with the parts, detailed instructions, and support from sites such as www.TvRepairKits.com . Or just click here to see more details on their kit.

Here are pictures of capacitors...Notice that the ones below look bloated. They have failed and will need to be repalced.



ecollier2012.jpg
Capacitor being replaced! Fairly easy DIY fix.

ecollier2012_0.jpg
Again, You can get a power supply repair kit with the parts, detailed instructions, and support from sites such as www.TvRepairKits.com . Or just click here to see more details on their kit.

Apr 25, 2011 | Philips 32PF9976 32 in. HD-Ready LCD...

2 Answers

2006 42" plasma has blank


Plasma and LCD TV sets are prone to having capacitors in the power supply section fail. This is the most likely cause for the probem you describe. When capacitors fail your will commonly see one or more of the following symptoms.
  • No video, Power light is on or blinking.
  • TV is making a clicking noise.
  • TV takes a while to come on
  • Screen is very dim or flickers.

Again, You can get a power supply repair kit with the parts, detailed instructions, and support from sites such as www.TvRepairKits.com . Or just click here to see more details on their kit.

Here are pictures of capacitors...Notice that the ones below look bloated. They have failed and will need to be repalced.



ecollier2012.jpg
Capacitor being replaced! Fairly easy DIY fix.

ecollier2012_0.jpg
Again, You can get a power supply repair kit with the parts, detailed instructions, and support from sites such as www.TvRepairKits.com . Or just click here to see more details on their kit.

Apr 23, 2011 | Philips 42PF9630A 42 in. Plasma Television

1 Answer

I have fixed two capacitator and I still keep on experiencing the red blinking light I was told it could be the main power supply box how can I fix this


Plasma and LCD TV sets are prone to having capacitors in the power supply section fail. This is the most likely cause for the probem you describe. When capacitors fail your will commonly see one or more of the following symptoms.
  • No video, Power light is on or blinking.
  • TV is making a clicking noise.
  • TV takes a while to come on
  • Screen is very dim or flickers.

Again, You can get a power supply repair kit with the parts, detailed instructions, and support from sites such as www.TvRepairKits.com . Or just click here to see more details on their kit.

Here are pictures of capacitors...Notice that the ones below look bloated. They have failed and will need to be repalced.



ecollier2012.jpg
Capacitor being replaced! Fairly easy DIY fix.

ecollier2012_0.jpg
Again, You can get a power supply repair kit with the parts, detailed instructions, and support from sites such as www.TvRepairKits.com . Or just click here to see more details on their kit.

Apr 06, 2011 | Philips 50PFP5332D 50 in. Plasma...

1 Answer

I have 3 flashing red lights on my 42" philips ambilight tv


Hello,

Your power supply board is not yet dead, You know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.


Hope this will help in solving the problem....

Jan 12, 2011 | Philips 42PFL7332D 42 in. Flat Panel LCD...

1 Answer

Phillips ambilight TV Flashing red LED light--- ^ long blinks and then 3 short blinks--- picture and sound will not come on---


Check the tv power supply board for those dying parts call copactors.That the board,where the power a/c cord plug into it.These capacitors are alway bulges or puffing up on it tops.U have tools and know basic electronic?Replaced those dying soon to be dead capacitors,will fix the power supply and have stable tv power again and tv will work.Or try website like Ebay.com to buy a whole refurbish power supply board for the replacement.

Nov 23, 2010 | Philips 50PF9731D/37 50 in. Plasma...

1 Answer

Philips HDTV with back light will not turn on unless you plug and unplug it several times? What's wrong?


I have the a Philips Ambilight TV too. The power supply has two capacitors that may be going bad. Check the pic here...
4174f21.jpg
In the Samsung power supply on the Philips TV, this part is known to fail and needs to be serviced or replaced. If you can do simple soldering work, you can replace these for less than $20 (for parts and shipping).

Oct 10, 2010 | Philips Televison & Video

1 Answer

My 50 in philips ambilight plasma will not turn on and blinks a red light 7 times and repeats


The failure with your plasma is with defective capacitors in the power supply.
Check the link below with info on how to DIY.
http://www.fixya.com/support/t5048641-easy_replace_capacitors

Jul 16, 2010 | Philips 50PF9631D 50 in. HD-Ready Plasma...

1 Answer

Tv will not turn on and has a blinking red light - no response from mauel or remote - simply blinks


hello,

This type of power problem is usually caused by a failure in the power supply. Typically the failure is capacitors on the power board. What happens is heat builds up in the TV case and the capacitors overheat, this causes them to bulge and short out. When they fail the power supply can't stabilize the voltages so it keeps resetting and trying again. If you can solder then you should be able to do the repair yourself. Check out this article on our web page: http://www.ccl-la.com/blog/index.php/capacitors/
This will explain what the capacitors are and what to look for to get replacement parts. If you don't want to do the repair yourself we do offer a repair service, info on this can be found here: http://www.ccl-la.com/blog/index.php/service-request-form/ Feel free to contact us at tech@ccl-la.com if you have any questions.

I hope this helps, if so please rate our solution.

Buddy
Corporate Computer
www.ccl-la.com

Apr 18, 2010 | LG 32LX1D 32 in. LCD Television

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75304 Answers

matt martin
matt martin

Level 3 Expert

1216 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...