Question about Washing Machines

Open Question

Error code ac h1 - Washing Machines

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Have error code H1 on my freezer. I have it set on 5 what does it need to be

Frigidaire Refrigerator Error Code = H1
Condition = Freezer sensor shorted in freezer display
Repair or Check = Check wiring between thermistor and board. If correct, replace thermistor
Parts Needed = Thermistor (temp sensor)

Jul 05, 2017 | Refrigerators

1 Answer

How to remove H1 error in voltas AC?

It indicates a problem, what that is contained in the factory repair manual and meant for technicians. when the error has been been repaired the code will clear.

Apr 20, 2016 | Heating & Cooling

2 Answers

What does H1 code indicate?

Hello E, I appreciate your post!
I see that your Frigidaire air conditioner is displaying an error code of "H1". I have reviewed the air conditioner and the "H1" error code could be an "HI". The "HI" error code means that the room temperature is above the display range. I would recommend performing a reset on your air conditioner. In order to reset the air conditioner you need to unplug the power cord you can press the reset button and then the test button that should restart your air conditioner. If that does correct your issue I would recommend seeking assistance from a professional technician for proper diagnosis and repair. I hope this information is helpful for you. -Matt

Jan 22, 2016 | Frigidaire FRS12PYS1 12000 BTU Split...

1 Answer

Side by side fridgidare wont stop beeping and showing H1, freezer door was cracked all night and our ac was out, tried to unplug and reset still nothing???

Hey Nikkie, I appreciate your post!
I see that your Frigidaire refrigerator is beeping and displaying the error code of "H1". An "H1" error code means that this is a high temperature within the refrigerator. Since the door was left open all night the refrigerator is registering there is a high temperature. I would suggest keeping the door closed and allowing the refrigerator to get back to the correct temperature. This may take anywhere from 24 to 36 hours for the temperature to stabilize. Hopefully this information is helpful to you. -Matt

Dec 25, 2015 | Frigidaire 26.0 Cu. Ft. Side-by-Side...

1 Answer

What to do when h1 is flashed in ifb automatic front load washing machine

Cannot find anything about H1, but error code E01 is door not closed properly. An instrument at work sometimes reads "h1" and this indicates a "high" reading, but don't know if that is really relevant here. Sorry I can't help any further. Good luck.

May 19, 2015 | IFB Washing Machines

1 Answer

ASKO TL751 error messages ?

Asko dryers as model T760 or T780 indicate failure by error message (like "Overflow", "Sensor", "Thermistor", ...) while the model TL751 indicate failure by error code ("H1", "H2", ...)

Below you can see a list of error codes:

H1 error - Humidity sensor error
H2 error - Drying temperature sensor open/short error
H5 error - Heater overheated (ELECTRIC TYPE)
Heater disconnection check and H4/H6 error (ELECTRIC TYPE)
H3 Error - Flame Detector Open Defect (Gas Type)
H7 Error - Gas Valve Defect or Gas Blocked-off (Gas Type)
H8 Error - Igniter Defect or Flame Detector Short (Gas Type)


Mar 31, 2015 | Asko TL751 Electric Dryer

1 Answer


Hello friend, thank you for your post!

I understand that your Frigidaire refrigerator is providing a "H1" error code. However, "H1" is an invalid code. I show a code for "HI" and that stands for high temperature in the freezer compartment. If you are receiving this error code but your temperature is cold inside your freezer it could be a miscommunication within the board and I would perform a reset on your appliance by flipping the household circuit breaker for ten minutes. I hope this helps. -Matt

Aug 18, 2014 | Frigidaire FFHS2322MS

1 Answer

In IFB front washingmechain AC h1 error is coming what to do

AC h1 is actually AC hi error which means input voltage is too high. Wait for sometime for voltage to stabilize Washing machine will automatically start. If not call electrician to check electrical fault for high voltage

Jul 03, 2014 | Kenmore Elite 45986 Front Load Washer

2 Answers

Fridgeaire error code H1

Hello - Could it possibly be HI? Typically error code HI indicates that the unit has detected high temperature in freezer. Try setting the unit to a lower setting. Generally the factory setting is 0 for the freezer temperature and 37 for the fresh food temperature.

Oct 13, 2012 | Frigidaire FSC23F7DSB Stainless Steel Side...

1 Answer

Samsung washing machine error h1

hi !

look here :

Aug 13, 2012 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 3 Expert

77947 Answers

Brad Brown

Level 3 Expert

16847 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides