Question about LG Televison & Video
Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts.
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Posted on Apr 21, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Sounds to me you have a cold solder joint ( loose solder connection ) on the printer circuit board around or on the vertical chip or on one of the vertical capacitors. You may also have a bad vertical chip or a bad vertical capacitor, but I doubt it since it did come and go. I'de get a soldering iron and some solder and touch up the connections. I will remind you that you need to always excersise saftey by making sure, before removing the back, unplug the TV from the wall, and use care not to come in contact with the large red wire going to the back of the picture tube as the picture tube can be turned off and still store lots of voltage ( up to 35,000 volts). Always stay safe and when soldering, use care not to run solder across places that will make a short.
Good Luck and I hope this helps
Ed Meshechek ( Radio Man )
Posted on Dec 19, 2008
this is very common with these sets. the fix is to replace 11 very very smal capacitor on what is known as the hypermodule. The ideal sitation is to replace the hypermodule. if you can find it. I can do this repair. I have done about 10 at the shop. if you need to i would suggest finding someone who is very experence in surface mounted repair
Posted on Jan 15, 2009
Find someone in an area that the Company will ship to and send them the money to get the replacement board. then give them the shipping address and have them send it to you . I would be willing to help if all it will cost me is the time. You would have to take care of the E-Bay Bill and The shipping costs from my location to yours.
Posted on Feb 28, 2009
This should be repairable. It may be the LVDS Cable or the Main board problem. The only other problem is the T-Con Board.
Posted on May 23, 2009
Tips for a great answer:
Oct 29, 2016 | LG 47LE5400 47 in. TV
Jan 05, 2016 | LG Televison & Video
Aug 06, 2015 | LG Televison & Video
Feb 05, 2015 | LG 47LE5400 47 in. TV
Feb 13, 2018 | Vizio P50HDTV10A 50 in. Plasma HDTV
Apr 06, 2012 | LG 47LE5400 47 in. TV
May 06, 2011 | LG 47LE5400 47 in. TV
Nov 11, 2010 | LG 47LE5400 47 in. TV
Sep 13, 2009 | RCA TruFlat 27F520T 27" TV
55 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: