Question about Sewing Machines

1 Answer

My master craft welding 58-8027-4 machine is not turning on. It was working perfectly suddenly when turning it on it doesn't. Help

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 3 Answers

It sounds like the pass transistor may be bad. That control's the current to the motor. I feel strongly from a distance it could be shorted. Seek help from someone who deals with audio power amps. They'll have the skill to diagnose the problem and make the needed repair.

Posted on Apr 19, 2017

  • Walter cifuentes Apr 20, 2017

    Thanks for your help greatly appreciated

  • Walter cifuentes Apr 20, 2017

    Actually it wasn't that. The problem is that the switch has three different celenoids I will call or switches that are hold by screws that are screwed on a plastic holder the holder is broken so celenoids are hanging freely, when turning the main switch to turn it on there is no contact. Damn Chinese builders I hate this way of building to replace technology if you dig what I mean!!!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I get a power cord with the pressure foot with it for a craft master 4300.


it will all depend on the plug into the machine
take the control you have now to any sewing machine service agent and see it they can help

Jun 28, 2016 | Craft Master Sewing Machines

1 Answer

Where can I get a manual for a craft master 4300 sewing machine?


The Craft master 4300 was also sold with the Janome HD1000 label. Thus the Janome manual should help you. That manual is available from Janome at the HD1000 product page: http://janome.com/en/machines/sewing/hd1000/ . The direct link is http://janome.com/siteassets/support/manuals/economy-models/inst-book-hd-1000engfrsp.pdf .

I hope this helps.

Cindy Wells

May 18, 2016 | Craft Master Sewing Machines

2 Answers

Were can I order a sewing machine needle for my Craft Master 5000


Try these people

http://www.sewingpartsonline.com/assorted-needle-set-5pk-janome-200343004.aspx

Nov 24, 2015 | Craft Master Sewing Machines

1 Answer

How do I order a new craft master 4700 machine


There are several ways to order a new craft master 4700 machine is by Internet, any stores that sell these brands of machines, or go to a particular material store and they can help you to order the sewing machine you want. It always helps to have a variety of places one can go to get help in ordering the right thing that one wants.

Aug 03, 2014 | Craft Master Sewing Machines

1 Answer

Thread is braek in between bobbien for cloths


Clean the bobbin and chase. Look for any bits of stuck thread. If that doesn't work, re-thread the top and bobbin. If that doesn't work, take the needle out and re-insert making sure it is the correct way.

Aug 26, 2012 | Craft Master 4400 Mechanical Sewing...

1 Answer

How to put thread in a craft master 300


If you have you instruction manual look in there. If not, your sewing machine was distributed by Sears. Gather numbers from the machine (on the label on the back typically) and search for the instruction manual at parts.sears.com

Good luck.

Aug 24, 2012 | Craft Master 300 Mechanical Sewing Machine

1 Answer

Janome Memory Craft 7000 Sewing Machine- When I turn the machine on it moves the needle position slightly and message comes up Err 4, then it freezes. Any clues ????


My Memory Craft 7000 sometimes does the same thing, if it's very cold. Try warming it up by placing it near a heat source, a vent or a floor heater, for a few minutes. Then it works perfectly.
I've used these machines for over 20 years now, and they're my favorite!

If this doesn't solve your problem, you need to take it in for servicing.

They are work horses, but they do need their maintenance from time to time.

I hope this helps you.

Aug 17, 2008 | Janome Memory Craft 5700

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Chris Wetmore

Level 2 Expert

185 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

Are you a Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...