Question about Power Up Audio Players & Recorders

Open Question

Radio will not power up in AC/DC mode. What gives?

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Power Requirement for Delphi Roady 2 XM Radio

as long as the voltage of your supply is DC, 6V and has the right POLARIZATION on the power jack. (ie, make sure the center pin matches what the receiver expects... if it's backwards, you risk blowing up your receiver) All of these must match exactly to what the reciever expects.

as for Amp rating, the minimum you must be able to supply is 600 mA. so a 1300mA supply will work just fine!

Posted on Apr 08, 2009

  • 910 Answers

SOURCE: dewalt radio 011 wont power

Sound like one of the Capacitors on the Power Supply has blown.

If it's the same on both AC & DC then its probably on the output of the transformer.

If you can open it up and post pictures or see if one has a buldge in the top or liquid leaking out.

Posted on Apr 22, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why did the ac power quit working on my pr-d7? the dc still works fine.


there is a diode D301 must be opened, replace it should be ok, but have to check your AC adaptor in advance.

Nov 17, 2014 | Sangean PR-D7 Digital Rechargeable AM/FM...

1 Answer

I need a power adapter for the midland WR100 radio


www.solid-signal.com
http://www.parts-express.com/cat/ac-dc-power-adapters/1463?utm_source=google&utm_medium=cpc&utm_campaign=A_Cats_BP&utm_group=ac-dc-power-adapters_1463_BP&utm_term=power%20adapters

Aug 27, 2013 | Computers & Internet

1 Answer

Manual


There is no dc switch as such. To operate the unit on batteries simply unplug the ac power cord.

Jun 29, 2013 | Sony Xplod CD/Cassette Boombox with AM/FM...

1 Answer

I need charger for netset pro44 scanning receiver please



  • Hi, i can help.

  • The original is not really gonna be find-able. But there is a DC/DC and AC/DC power cord that are the replacement for them.


  • For AC/DC you can go anywhere and get a 9VDC - 300 mA AC/DC wall wart with a 1.3 mm / 3.4 mm. plug. Radios Shack have gone to selling universal wall worts and selling the tips for them separate. So if you go to radio shack use tip "H" along with the spec I listed above. They will know which one if you give them that info.



  • If you have any comments please feel free to leave them here.
  • Hope this helps and thank you for using FixYa.

Regards, Tony

Sep 19, 2011 | Radio Communications

1 Answer

Dewalt radio 011 wont power up with ac or dc but the red indicator light will flash one time when pluged in either ac or dc but definitly got pluged into 240


Sound like one of the Capacitors on the Power Supply has blown.

If it's the same on both AC & DC then its probably on the output of the transformer.

If you can open it up and post pictures or see if one has a buldge in the top or liquid leaking out.

Apr 22, 2011 | Dewalt DC011 AM/FM Radio

1 Answer

700p powers up for seconds then shuts off every time i try to turn it on


HI,

7OOP SMPS POWERS UP FO SECONDS THEN SHUTS FOR EVERY TIME.......

SMPS (SWICTH MODE POWER SUPPLY) HAS TWO SECTION IN IT
ONE IS AC SECTION AND OTHER IS DC SECTION WHICH IS SUPPLIED TO MOTHERBOARD,WHEN SMPS IS TURN ON ITS STOPS ALL OF SUDDEN,ITS A PROBLEM OF AC SECTION (PRIMARY SECTION) BECAUSE OF BAD AC 3 NOS TRANSISTORS IN AC SECTION) REPLACE SMPS OR GIVE IT TO COMPUTER CHIP LEVEL TECHNICIAN.

TNKS

RABBANEES

Nov 04, 2009 | Sylvania Computers & Internet

1 Answer

Does not switch to AC power


check the power cable...if it does not detect the AC voltage from the wall it will remain in the DC mode sourcing from its battery

Aug 11, 2009 | Powerware Best Power Fortress UPS System

3 Answers

Use Sony ICF-C1IPMK2 in Europe


A transformer type (Linear Mode Power Supply) AC to DC power adapter with a 9.V nominal output, measures about 12.V without load when tested with a multimeter. A power adapter with a nominal output of 7.5 V, measures a little over 9.V. Considering a number of people across different forums reported the adapter's measured power output as 12.V, I think the nominal rating of the AC to DC adapter should be 9.V. However, keep away from Switch Mode Power Supplies.

Jul 21, 2009 | Sony ICF-C1IP White Powered Speaker System...

2 Answers

Power Requirement for Delphi Roady 2 XM Radio


Radio shack has a unit that plugs into a 110 socket and will accept the 12V plug that is standard with the radio. I use my unit in the house, car and on my motorcycle. The part number is 22-505 for the Radio Shack part.

Dec 02, 2008 | Delphi Roady2 SA10085 XM Radio Receiver...

1 Answer

AC/DC adapter


Make sure the voltage and amperage is the same and the tip fits.
I use I-GO universal from Radio shack

Apr 19, 2008 | Toshiba Satellite L25-S119 Notebook

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Power Up Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

5056 Answers

The Knight
The Knight

Level 3 Expert

74136 Answers

Are you a Power Up Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...