Question about Washing Machines

2 Answers

Hot water not running to machine just the cold water

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 14 Answers

Hot water sensor is bad, or hot water control valve is bad

Posted on Apr 19, 2017

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Try switching the hot and cold hoses. See if the hot water works. Sometimes the gate gets frozen, other times the hot is so slow it seems to not be working, similar to when it takes a long time to get hot water in the sink.

Posted on Apr 19, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

faggly
  • 74 Answers

SOURCE: Maytag performa washer hot water runs continuously

Littleone.. please check your instructions.. some washers now dont need Hot water connection to them...they heat their own as part of the efficiency settings on the wash programmes themselves!

Regards Faggly

Posted on Mar 19, 2008

  • 1 Answer

SOURCE: cold water trickle hot water runs good

turn off water valves at wall, disconnect the supply hoses from the washer. where the hoses connect to the washer, there is usually a stainless steel screen/strainer inline on both the hot and cold inlet. corrosion on the cold side is pretty common. Menards, Lowes Home Depot stores sell the replacment screeens.

Posted on Jan 25, 2009

jumptrout51
  • 3361 Answers

SOURCE: no cold water will enter machine but not water

Turn off the cold water.
Remove the cold water hose from the washer. Clean out the filter screen in the water valve. Re-attach the hose and turn the water back on. If you get no cold water replace the water valve.

Posted on May 05, 2009

  • 51 Answers

SOURCE: machine will only allow very hot water to enter machine

the cold water solenoid may need to be replaced

Posted on Jun 12, 2009

SOURCE: whirlpool washing machine...only uses hot water

Make sure the hoses are connected correctly to the water valve on the machine. The connections will be marked with an "H" and a "C".

Given they are correct, most current washing machines have and auto temp feature on the water fill. It allows even cold water settings to bring in some hot water to make sure the water temp is hot enough to efficiently disolve your laundry detergant. The preset temps are usually around 75* for cold, and 105* for warm. Hot water comes in at whatever temp your household water temp is.

Posted on Sep 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hot water will not run into top loading machine.


Is this a new install? Has it worked before and now it doesn't? Did you let it run long enough to confirm that there was ample opportunity for the hot water from your heater to make its way into the machine? If you turn off the hot tap and the only solenoid that is opening is the cold, then there is a problem with the machine.

Dec 27, 2014 | Washing Machines

1 Answer

Why is hot water running in on a cold water wash


the machine will blend hot and cold to get the correct temperature. when set at 40. the water entering may be at say 35. depending on the machine, it can either heat it up or add hot water. one solution is to use a splitter and run both hot and cold from the cold supply.

May 25, 2014 | Fisher and Paykel Washing Machines

1 Answer

Hot water continues to run from washer does not stop have to turn off hot water supply. Samsung front load one of the first models made


solenoid valve for hot water may be stuck or faulty. If you have a cold water supply, you may be able to run the machine using only cold water, turn off the hot water and keave cold on, see what happens.

Jan 08, 2013 | Washing Machines

2 Answers

Only hot water is coming . cold water none


Ensure the hose's at the back are in the right places, Could be you or the fitters has put them in the wrong place.

Feb 20, 2012 | Kenmore Washing Machines

1 Answer

GE WPSR3100W0AA Does not run on Hot-Cold temperature mode, only on cold- cold or warm-cold. Hot water hose and faucet are ok and ON.


you can switch the hoses to verify that the temp selector is working if you have the cold water supplied to the hot side and run the machine on hot-cold side and nothing comes out then replace the water inlet valves.

Nov 21, 2010 | GE Profile WPSR3100W

1 Answer

Cold water runs hot even when hot water valve is turned off.


check to see if the cold tap is connected to the cold valve on the machine and the hot tap to the hot valve. on the machine it will have cold or c for the cold valve and hot or h for the hot valve. please reply if you need further help.

May 19, 2010 | Washing Machines

1 Answer

There is no cold water only hot and the machine shuts itself off before filling with water


Not enough information, but I'm assuming you have 2 inlet water valves. 1 hot water and 2 cold water. Possibly you connected the hot water to the hot water valve. It must go to the cold water valve instead. Not good to run the washing machine like that as it will bring other problems into play. (colours running, plastic distorting etc.). That's if it is very hot water.

Oct 10, 2009 | Maytag Atlantis MAV9501E Top Load Washer

1 Answer

My Admiral Washing machine only runs the hot water (not cold)


if you want to use cold water, switch your hoses from hot to cold and cold to hot. You will get cold water now

Dec 06, 2008 | Kenmore Elite 45986 Front Load Washer

1 Answer

No hot water to wash


Is the hot water hot that is coming to the washer? Are you using the correct settings on the unit? If yes to both then either the solinoid water valve is bad or the timer switch unit is bad. Try going to a totally hot water setting. While turning on the machine feel of the hot water line at the machine and see if you notice a buzz or feel a click as you turn on the machine. On this setting does water run in and is it hot or cold. If water runs and it is cold try going to a total cold setting and see if you get cold or hot water. Is this a new setup or has it been working and stopped? If new, you could have the hoses connected backward. If you get water in both hot and cold settings but cold both ways then your hot water heater is not working....let me know....

Feb 10, 2008 | Frigidaire FEX831CS Top Load Stacked...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1460 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...