Question about Car Audio & Video

Open Question

Cannot get into the bridge. I have in the past. If the patient left, am I still able to get into the bridge?

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On Smurfs, I accidentally deleted my large bridge and now it won't let me purchase and build another bridge to get to the left side of my village. What should I do to fix this? I play Smurfs on the...


You can build another long bridge. You might have a problem placing it so be sure to move other objects out of the way.
Another problem on the iPod touch & iPhone is you can't scroll past the river when you don't have a long bridge. As it takes 120 hrs to build it can be a few days before you have access to that side of your village.

May 14, 2011 | Apple iPhone Apps

1 Answer

Can I hook up a wrt54gs to a wrtn160 wirelessly


Yes you can. You just need time.

Some more detailed info..
It is pretty annoying to do though. I'll try my best to explain. First you have to set one of them up as a wireless bridge (the one you are setting up as a wireless bridge won't be able to use it's wireless for anything else besides connecting to the other router). By doing this you can use the router as if it was a wireless adapter. If you want it to be a repeater and have a wired connection. Set it up as a repeater bridge. You will probably have to install custom firmware (dd-wrt or tomato.. they are both pretty much the same)to be able to set it up as one of those. You will have to download the one for your router and install it. I recommend that you read the instructions carefully. A laptop where you can move around to the routers and set them up is useful.

Be patient and good luck.

Mar 06, 2011 | Linksys WRT160N Wireless Router

1 Answer

Ekg machine states left leg fail, but none of the leads are reading anything. works sometimes, but does this occasionaly. Does anyone else have these complaints?


hi,
ur machines patient cable have some problem in its left leg lead ,it may be broken inside. no ecg will come if any of the lead have problem. machine sences all the leads is it proper or not , then only it will process th ecg and give printout. u have to replace the patient cable of ur machine. or try to replace the left leg lead if it is repairable one type patient cable.
ok

Jan 10, 2011 | Life Science Bionet Cardiotouch 3000 12...

1 Answer

Have you heared of e-Val MD? How is it? Would glad to get some information on it.


e-Val MD is actually pretty good. easy to use, great format for patient history and physicals. stores unlimited patient information. exporting patient records can paste nicely into my EMR system

Sep 06, 2010 | iPhone Apps

1 Answer

Can you help me get past the part in god of war 2 where your supposed to get wings under a bridge


A save point will be to the left and a --GREEN CHEST-- and --BLUE CHEST-- will
be off to the right upon exiting the cave. Walk over to the bridge then jump
to the next section and walk to the end of the bridge for a cutscene.
This battle will start with an Action Sequence.
This first part of the battle will decide which character will be on top of
the other as they both plummet into the chasm. Fail to press the proper
directions and Icarus will automatically win
Once the two have started falling, tap [], /\, or O to attack Icarus while
falling into the chasm below.

Jan 13, 2010 | Sony God of War 2

3 Answers

It has an A and B channel for spkrs and i have one spkr bridged. do i split the neg to side a and pos to side b or just use one of the channels?


Could you elaborate on how the speaker is bridged?

I think you want to hook up a single speaker to a stereo speaker output.

In this case, you would strap (bridge?) the right and left speaker terminals by running a short wire from A right negative to A left negative. Then strap A right positive to A left positive -- this will give you mono output on either of the right or left speaker terminals -- connect your speaker to either one of these.

Do you know what the ohm rating is for the speaker outs on the amp and also the speaker itself?

Charlie

Aug 31, 2009 | Rockford Fosgate P3001 Car Audio Amplifier

1 Answer

Viewing preview eps icons in Bridge CS4


Wow flash from the past. If possible, upgrade to a later version of the OS. At least 10.6, but honestly even that is old... anyway. Are you sure the eps were saved with preview images in illustrator? This might be the issue. Bridge previews are separate from the finder (apple). It's not really an OS issue, it's adobe.

You might also try deleting the preferences for bridge. With bridge closed, try this:

Start Adobe Bridge and immediately press Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS) until the Reset Settings dialog box appears. Select all three options--Reset Preferences, Reset Standard Workspaces, and Purge Entire Thumbnail Cache--and then click OK.

Hopefully that helps.

Jun 29, 2017 | Apple Computers & Internet

1 Answer

I need to no how to bridge a mtx thunder TA5601 Amp


I hesitate to answer this question for fear that you will not like the answer even if it is the truth. I have received a bad rating from a couple of people in the past just because the right answer was not what they wanted to hear.

This is a mono sub-woofer amp, which means that it is already bridged internally. You only have one speaker output in this amp, that means that the amp circuit is bridged inside, it is not split into two channels.

To bridge any output, it requires 2 channels, otherwise there is nothing to bridge.

I have been repairing car amplifiers for over 18 years, and I promise you that there is no way to bridge a single channel amp. Bridging means to convert 2 channels into 1 channel. If all you have is one channel, then there is nothing left to bridge.

I hope this explains it for you, if you have any other questions feel free to post them here and I will answer as soon as possible.

And please do not punish me with a bad rating if you do not like the answer, it is the correct answer, and sometimes the right answer is not always what we want to hear, but it does not make it wrong.

Dave

Nov 09, 2008 | MTX Car Audio & Video

2 Answers

Bridging issues


There's no signal on the L- and R+ terminals.

If you're going to bridge both speakers on the amp, each speaker must have an impedance of 8 ohms (or more). If you're unsure of the impedance of the speakers, connect one speaker to each channel.

Let me know if you have any other questions.

Sep 19, 2008 | Kenwood KAC-6202 Car Audio Amplifier

1 Answer

Vietcong purple haze PS2


wait for the soldiers to quit firing. that is what i do in most games

Sep 29, 2007 | Sony PlayStation 2 (PS2) Console

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4862 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

The Knight
The Knight

Level 3 Expert

74251 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...