Question about Viore Televison & Video

Open Question

I have a VIORE TV model LC20V21 Ser# C0A061007494 Can this be used with an over the air type HD antenna. If so, how do I hook up and what source on TV is used.

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 4 Answers

SOURCE: Is Model Philips/Magnavox VRA631AT22 HDTV Ready

I am not absolutely positive, but I do not think you will be able to get ANY TV after the transition without a converter box, unless you hook up to cable or a dish. IF your Tv were able to get HD, it would say so on the set...

I live w/ a son & DIL and we have Direct TV so we can already get HD programs, but since none of our sets are High DEF we do not get them IN high Def.... I also have two small TVs,- one in the spare bedroom and one in my computer/ library... both of those are hooked up with old fashioned antannae..[ I also have a VCR hooked up to each]. I have added a converter box to each and can already get more stations than I did before and the picture is better,
although it is NOT in High Definition; You have to have a High Definition TV to get programs in that foremat, although you can get a GOOD program; so it was worth the small amount I paid for the boxes... I got the Government discount coupons so they were reasonable...

Last week one of the local 'Best Buy' stores advertised the converter boxes for as low as $9.99 w/ the coupon... I think the Gov'mt has run out of funds, however.

I hope this answers your question...

Posted on Jan 25, 2009

Ad
  • 8457 Answers

SOURCE: I have a samsung LN52A550 LCD tv set and it won't

Get a roof or digital antena.Will give u better signal.HD 1080i CBS,NBS check that if u have that in 1080i well able to get HD on the set.U might have a 720p tv set.

Posted on Dec 15, 2009

  • 1 Answer

SOURCE: my viore lcd tv model LC20V21 wont turn on

MY VIORE 42NAFC MODEL COMES ON AND SAY PLEASE WAIT AND SHOWS NO PICTURE

Posted on Apr 11, 2010

  • 32 Answers

SOURCE: off air antenna hook up

You probably have to set the tv to run on the input jacks your antenna is plugged in to. In other words these newer tv's have 2 or 3 inputs and they only run on the input it is set on, if not the right one you must change the setting. On mine there is a button next to the on/off button on the set which is inputs, keep pressing that button and it cycles through inputs till you get the right one. When tv first comes on it flashes the name of the current input on the screen--think they all do that. If input is hdmi, it refers to the hdmi socket, if composit (I think) then it refers to the rca jacks that are red, white, yellow, may be more than one of either. In this way you could have cable on one input, a video player on another, and cable on still another by switching desired input. I use a UHF antenna but it didn't work till I got the right input and then searched for stations studying the menu for station setup, have to set up the stations first, it will configure settings for each station, and have it do that before you can expect to find and receive stations. With correct input you should get a blue screen or something with printing if input is right, click your menu button and will see the menu and then find where to configure stations setup, otherwise it is totally black and nothing happens, nothing responds, that's the wrong input.

Posted on Sep 30, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

No picture or sound


You need a antenna HD for air signals. I hope this helps. leave feedback and thank you

Jul 11, 2016 | Televison & Video

1 Answer

What do I put the settings on for antenna TV model # LCD24VF75


Hi Kenny,
Press source key on the remote control. You will get the list of input sources on the screen. Select TV.

Jun 17, 2015 | Viore Televison & Video

1 Answer

PICTURE SEEMS TO BE BLURRED WHEN ITEMS MOVE FAST ON SCREEN, ESPECIALLY PERSONS IN CLOSE UP.


The Sony Bravia KDL-32BX320 generally gets excellent reviews (4.5 stars out of 5) from owners, so I have to wonder what you're watching.

This is an HDTV and should excel when provided an HD signal to display. SD (standard definition) signals often look worse on an HD display than on an SD display. An HD signal is only available via the following ways (reference the image below):9_27_2011_4_28_11_pm.jpg
1) An "over the air" (UHF / VHF) antenna is connected to the cable / antenna input and there is a broadcaster of HD content nearby (only an over the air antenna can input HD signals to this jack - no cable boxes, etc.).

2) An HD Cable TV, DirecTV or Dish Satellite set top converter, Blu Ray Disk Player (or other HD source is connected via HDMI or Component RGB jacks.

3) An HD video played back from a computer hard drive connected to the VGA jack (when the computer is equipped with a modern processor and video card).


You will NOT be able to view HD video if:

1) The source material is a SD (non-HD) source. An over the air antenna will not provide HD signals if the broadcaster does not have HD content to show or is not capable of broadcasting in HD. Digital is not necessarily HD.

2) The source material (other than over the air antenna) is connected via Antenna / Cable jack.

3) The source material is connected via Composite jacks.

The USB jack is generally not an input for motion pictures, but may display stills - depending on the TV's ability to play the format they are stored in (jpeg, gif, bmp etc.).

Hopefully, this will help you solve the problem you're having with the picture. Good luck!

Sep 27, 2011 | Sony Bravia KDL-32BX320

1 Answer

I am tire of cable and want to use an antenna, I have hooked an antenna to the tv checked the hook up and it is secure, but am getting no signal...I have been trying to find a place to change from cable to...


After u hook up the antenna source like a digital or a roof antena to the tv.Used ur remote go into the tv menu.Goto SETUP,go down to CH.Pick AIR enter and scan for free air DTV channels.

Feb 25, 2011 | LG 32LG30 32 in. LCD HDTV

1 Answer

Hi- I bought a used 37LC model (less than 1 yr old) without a manual. I cannot get any over the air local stations to come up under the TV mode. Does this model have a normal tuner ? The display shows...


if the display says cable, it won't get over the air signal. switch the source to antenna, hook up an antenna and go through auto program sequence.

Jun 17, 2010 | Proscan 37LC30S60 TV

1 Answer

My viore lcd tv model LC20V21 wont turn on anymore. Any suggestions?


MY VIORE 42NAFC MODEL COMES ON AND SAY PLEASE WAIT AND SHOWS NO PICTURE

Mar 22, 2010 | LG 42LC2D 42 in. LCD HDTV

1 Answer

How to un-Dish a t.v.


In the USA broadcasts are not analog any longer they are digital. So if you have an antenna hooked up to your TV you will need a digital converter hooked up to your input wire (from antenna) and then an output from the converter to the TV. Most satellite and cable companies use RG56 cable which will work fine with an antenna set up as well, so cabling should not be a problem.
Make sure you set your TV mode (input or source) to the proper input where you have hooked up the cable to the TV as well. It is unimportant which input you use, but the TV has to have it set to the same one.
If you are outside of the USA, the above should be the same because broadcast over the air and antennas set ups are universally the same in nature and design. I hope this helps and good luck!
c8e0ff0.png

Feb 02, 2010 | Televison & Video

1 Answer

I have a samsung LN52A550 LCD tv set and it won't show anything with a HD signal. If I hook up a 480I signal the tv will work,but if I hook up the tv antenna or any other hd source to it,the tv goes crazy...


Get a roof or digital antena.Will give u better signal.HD 1080i CBS,NBS check that if u have that in 1080i well able to get HD on the set.U might have a 720p tv set.

Dec 15, 2009 | Samsung LN52A550 LCD TV

1 Answer

HDTV no over the air signal.


No... Andraade11,

There is nothing exclusive of using a HDMI port...
you can have it all.

You are still able to switch right back to your old configuration...

I believe you merely need to step through your
"SOURCES"

Unless Dish us incredibly behind the curve
they used a HDMI to bring their signal to your set...

and add ($$$) a LOCAL "OPTION" into
their feed... but if you ALREADY had an antenna
hooked up... you should be able to switch right back to that source... or a VIDEO PLAYER obviously IF you have one)

and/or a SECURITY screen
(if you have a compatible camera or server)

Etc. etcetera...

Carnac the Magnificent

Apr 05, 2017 | Sony BRAVIA KDL-46S2000 46 in. LCD HDTV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Viore Televison & Video Experts

Tom Chichester

Level 3 Expert

35657 Answers

Back2life...

Level 3 Expert

933 Answers

Brandon Murphy

Level 2 Expert

214 Answers

Are you a Viore Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...