Question about Electric Mobility Mobility Electric Power Scooter Wheelchair. Heavy Duty

Open Question

Have a 6000 series and speed control is not working , cannot increase or decrease chair speed ,jot

Chair joystick controller has a speed potientometer and is not working

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
dromtonpa
  • 40 Answers

SOURCE: Need to test Hoveround mpv4, batteries are dead

No you will have to have proper working batteries.   

Posted on Mar 26, 2009

Ad
  • 32 Answers

SOURCE: wheelchair will not run. lights blink on and off

may have damaged one of the two motors or disconnected motor plug.

Posted on Jul 13, 2009

  • 17 Answers

SOURCE: my daughter has a free style power wheel chair

Not a reset problem. More like the chair is not in gear or a battery problem.

Posted on Sep 22, 2009

bill91074
  • 401 Answers

SOURCE: HELP ! My Rascal joystick has option to raise & lower height of chair; I raised it to get in my freezer and now it will not lower. When it is in the RAISED position, the speed is less than a ONE a

The seat lift for a Rascal Turnabout run by an electric motor attached to a ball screw. When the seat is raised up the speed is reduced for safety. push the button to lower, if it does not lower then the problem is in the joystick.

Posted on Feb 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Push power button wont go but all the adjustments legs back tilt works


quantum 600 wheelchair troubleshooting Questions ... - Fixya

www.fixya.com > Forum > Tags
quantum 600 wheelchair troubleshooting chair won't go all i get form joystick is a picture of a ... around in a square there should be a rest button on the rear of the chair ,push ... Question about 600 E Electric Wheelchair - Used Power Chair.

[PDF]Pride Quantum 600 Owners's Manual - Scootaround

www.scootaround.com/.../Pride%20Quantum%20600%20Owner's%20M...
Quantum 600 .... The symbols below are used on the power chair to identify warnings, mandatory actions ... Pride will not be held responsible for injuries and/or property ...complete stop by releasing the joystick, then push the joystick forward slightly to .....breaker button, turn on the controller, and continue normal operation.

[PDF]Quantum 600E Owners Manual - Scootaround

www.scootaround.com/.../Pride%20Quantum%20600E%20Owner's%20...
Quantum 600E .... The symbols below are used on the power chair to identify warnings, mandatory ... chair. Pride will not be held responsible for injuries and/or property ... complete stop by releasing the joystick, then push the joystick forward slightly to ..... breaker button, turn on the controller, and continue normal operation.

[PDF]Quantum 600 Series - Pride Mobility Products


Dec 30, 2015 | Quantum 600 E Electric Wheelchair - Used...

1 Answer

How do you increase the speed in Jet3 power chair


I take it you are talking about increasing the maximum speed beyond the maximum the chair is set for now! the max listed speed for the jet 3 is 4mps, so if your chair is doing that there is only changing a load of hardware to increase speed past that (it is very costly) if your chair is second hand it may be that the chairs programming has been changed to reduce the max speed say for in-door use or for elderly with slow reactions to better control the chair, if that is the case it depends on the controller you have it would need a programmer box, you can buy these on ebay and the like or you could take it to a mobility shop and see if they will change it, a lot of these shops will offer to do it free to try and get your future custom, it only takes a couple of mins, most will just plug in to the charge / data port on the controller, select from the menu and adjust the speed etc. hope that helps.

Jul 09, 2014 | Jet 3 Ultra Power Chair

1 Answer

Why is my merits DL 5.2i stuck in low speed ?


You may have a thermal rollback issue. Try charging the chair overnight and leave the controller on while charging. This will give the control module/joystick time to reset themselves. Thermal rollback happens when a certain temperature in the motors is reached. The system shuts itself down to protect from damage.

Apr 26, 2014 | Select Jazzy Used Electric Wheelchair

1 Answer

Pride Motor Chair 2008 Vr2 Controller Speed adjustment lights go to fast setting but chair barely crawls along!


Great question! The slow flash is indicative of a speed reduced mode on models designed for a seat lift option. If the controller detects that the seat is elevated then the speed is reduced - regardless of what you try to do at the joystick.
First - try lowering the seat to its lowest position.
If this doesnt work then look for a bad or disconnected sensor switch on the seat post. There are two leads at a 2-pin plug that are not making a connection when the seat is lowered - causing the controller to sense the chair is not safe to drive fast.

Nov 08, 2013 | Health & Beauty

1 Answer

When I turn on controller power the speed lights flash slowly. Joystick does nothing and chair is dead. Chair is Pride Jet 3 Ultra.


Do all of the speed lights flash at the same time or do they ripple from left to right? If they ripple from left to right the chair is in lock mode and you can use the unlock procedures from my tips to unlock. If they are all flashing at the same time you have an internal joystick problem and the joystick needs to be replaced Hope this helps

Apr 27, 2011 | Pride Mobility Products New Pride Mobility...

1 Answer

How do you dial up the speed on the jazzy select 6


jrw if you are asking to increase the programmed speed of the chair then you need a programmer (a PP1) that will allow uo to increase the factory speed. But it's probably set at 100% already. Other than setting the speed on the joystick to full and changing the programmed speed will you be able to get the chair 's speed increased Hope this helps you

Oct 17, 2010 | Pride Jazzy Select 6 Indoor Power...

1 Answer

Somehow I have locked my Jazzy 6 Select Electric wheelchair. I know you need to push the trottle but I really don't know what to do.


Try This:

To unlock the power chair.
1. Use the on / off button to switch the control system on. The maximum speed / profile indicator will be rippling up and down.

2. Deflect the joystick forward until the control system beeps.

3. Deflect the joystick in reverse until the control system beeps.

4. Release the joystick, there will be a long beep.

5. The power chair should now be unlocked.

Hope it works.

Mar 20, 2010 | Pride Jazzy Select 6 Indoor Power...

1 Answer

I have a Jazzy Select model. Fairly new. It


It could be that the acceleration is set to low. This setting adjusts the time it takes for the chair to reach maximum speed that you have selected on the joystick. With a low setting, it takes it a few seconds to get to maximum. Reprogramming the acceleration to a higher setting decreases the amount of time for the chair to hit max speed. You will need a PP1 handheld programmer from P&G drives technology to change the settings, or take it to a local DME specialist who will usually have a programmer to reset the joystick.

Oct 28, 2009 | Select Jazzy Used Electric Wheelchair

1 Answer

The chair suddenly lost power and now the lights flash continuously. The chair won't take a charge. A repairman tried fixing it at a local shop and said he put a new battery in and it sizzled. Now he is...


If he put in the batteries (2) properly, they should never sizzle. Some will emit a very minute spark when the final connection is made, but that is normal. There are fuses coming off of each battery to the power controller that will blow at 40 to 100 amps or so, depending on the chair; these will blow before the chair frying, or the circuit breaker will trip, or the controller will fry and all will be quiet on the chair, so I am going to say that the batteries weren't properly hooked up, otherwise on of the above items would have shut everything down. Continuous flashes indicate trying to start the chair while it is still on the charger, or with the joystick off-center. Make sure it is unplugged and notohing is resting against the joystick. If it's still a no-go, then you have either a joystick issue or controller issue. You will need to test those by replacing with known good controller/joystick, which a dealer should be able to do for you. Good luck.

Jul 17, 2009 | Jet 3 Ultra Power Chair

1 Answer

How do I lock up my Hoveround MPV5? The tech that delivered my chair shown me a way to lock up the joy stick & wheels, I don't remember how he did it and can't find my manual.


1. Turn the controller on.

2. To lock the chair, depress and hold the ON/OFF button. After one second the controller will beep. Release the ON/OFF button. Move the joystick forward until the control beeps. Move the joystick in reverse until the control beeps. Release the joystick. There will be a long beep that indicates the controller is locked.

3. To unlock, turn the control system on. The speed/response indicator will be rippling up and down. Move the joystick forward until the control beeps. Then move the joystick in reverse until the control beeps. Release the joystick. There will be a long beep that indicates the controller is unlocked.

This is from the manual, I hope it helps you.

May 06, 2009 | NRS Hoveround MPV 5 - Used Power...

Not finding what you are looking for?
Electric Mobility Mobility Electric Power Scooter Wheelchair. Heavy Duty Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electric Mobility Health & Beauty Experts

Robin Hill
Robin Hill

Level 3 Expert

1263 Answers

Colin Taylor

Level 2 Expert

346 Answers

wcdoc1953
wcdoc1953

Level 2 Expert

280 Answers

Are you an Electric Mobility Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...