Question about Comdial Lands Phones

Open Question

Using Comdial 7260-00 phone, how do I access the last 100 calls CID? The user manual directions Feature, 6, #. Enter password. Choose Show....this is where is stops working

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 10 Answers

SOURCE: no CID

This message is in an area that discusses the 25202RE3. If you really have the 202, this model shouldn't have the CallerID capability. If there was ever a model 25204RE3, that model probably has it.

If you bought it brand new, then you might have the space-age chrome/blue-plasma model (2542YRE3?, where Y is either 3, 4, or 5). If Y is 3 (and the model number system holds), you don't have CID/VM. If Y is 4, you do. If Y is 5, you have a built-in answering machine as well.

Posted on Jan 31, 2008

IB4G2008
  • 3587 Answers

SOURCE: User Access Codes

there is such a function. should be referenced in your manual for usage..those are usually called 'account codes' and are used for different departments.

Posted on Mar 06, 2008

  • 2 Answers

SOURCE: Programming feature access keys

These Keys may be set as line keys instead of feature access or not tagged as "feature access" in the programming, also you can only have so many feature access keys... 8 comes to mind but I could be wrong, some features can be programmed permanently onto a button in the main programming so you can free up some more feature access (user programable) buttons.

Posted on Aug 05, 2008

  • 13 Answers

SOURCE: Can't answer direct line calls

This sounds like a programming issue on this telephone. There are 2 areas in programming that would cause this. If you have recently had a technician out to do some programming then it is possible that he made a mistake and needs to be called back to correct his mistake.

Posted on Dec 08, 2008

  • 4 Answers

SOURCE: comdial 7260-00

First try adjusting the ringer volume up. Also, you need to be in the ring group to have your phone ring on an incoming call. If you are not in the ring group, you'lll need to contact your local tech service.

Posted on Apr 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I forgot my skype passwod


Skype allows users to make free calls to computers anywhere in the world and make international phone calls on the cheap. To call, all users need is a working username and password. But nothing will disconnect your international calling plans faster than a forgotten Skype password. Without a working password, users cannot access Skype services. While Skype does not allow users to retrieve an old password, it allows users to reset their account passwords to remedy the problem.

1. Navigate to the Skype home page.

2. Click "Sign In."

3. Click the "Forgotten your password?" option under the Password box.

4. Type the email address you used to register with Skype into the box. Click "Get Password."

5. Check your email. Skype will send you an email with a link and a code to reset your password. Click the link in the email to access the password reset page.

6. Choose your Skype account from the list. Enter a new password. Confirm the new password by typing it again in the next box. Click "Change password and sign me in."

I hope you find it very helpful. Thank you for using fixya

Aug 16, 2011 | Skype IM

1 Answer

I want to change the nombers of the rings to get start the answering machin


These are the instructions from the manual, which I found here:

http://safemanuals.com/user-guide-instructions-owner-manual/GE/21028GE3-A-_E


RING SELECT (FOR ANSWERING MACHINE)

This feature lets you select the number of times you want to phone to ring
before the answering system answers a call.

1. Make sure your phone is OFF (not in talk mode).
2. Press the MUTE/PROG button to go to the main menu.
3. Press CID/VOL (up or down) button to scroll to HANDSET SETUP.
4. Press MUTE/PROG button to confirm.
5. Press the CID/VOL (up or down) button to scroll to the RING SELECT menu.
6. Press MUTE/PROG button to enter the menu. RING SELECT 3 4 5 6 TS shows in the display.
7. Use the CID/VOL (up or down) button to scroll to the your selection. The default setting is 5.
8. Press the MUTE/PROG button to confirm. You will hear a confirmation tone and the new setting shows in the display.

NOTE: If you select Toll Saver (TS) the unit answers after the 3rd ring if there
are NEW messages, OR the unit answers after the 5th ring if there are NO new
messages. This allows user to access their answerer from another location and
then hang up after 4 rings to save long distance charges.

Oct 13, 2010 | GE 21028GE3 Cordless Phone

2 Answers

How do I set up a phone to display caller id? It displays on other phones in the office but not on mine.


To set up call id you need to enter programming2.gif . Programming is done on M7310, M7324, and T7316 sets only. Press the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you wish to program call log on. Press the show key (top right arrow)
Press the next key (bottom right arrow) 5 times. The display should say TELCO FEATURES.
Press the show key (top right arrow) 2 times. The display should say CALLED ID: N(or Y)Press the change key til it says Y.
press the release key.

May 03, 2010 | NorStar T7316E Telephone

1 Answer

Have the comdial phone 7260-00 HAC and need to change the time


Timeset for
Comdial DX-80
  • Press "Feature" "#" "*" and enter your password (default is "########").
  • Press "Show" and "0814"
  • Press "Save" and then "Show".
  • The option to change the year appears. Press "Next" to skip. To change, press "Chg" then enter 2 digits for the year and then "Save" and "Next.
  • The option to change the month appears. Press "Next" to skip. To change, press "Chg" then enter 2 digits for the month and then "Save" and "Next.
  • The option to change the day appears. Press "Next" to skip. To change, press "Chg" then enter 2 digits for the date and then "Save" and "Next.
  • The option to change the weekday appears. Press "Next" to skip. To change, press "Chg" until you see the day you want. Press "Save" and "Next.
  • The option to change the hour appears. Press "Next" to skip. To change, press "Chg" then enter 2 digits for the hour in military format and then "Save" and "Next.
  • The option to change the minutes appears. Press "Next" to skip. To change, press "Chg" then enter 2 digits for the minutes and then "Save".
  • Press the "On/Off" button to exit the programming mode.
Carl

Nov 03, 2009 | Comdial 8324S-PT Corded Phone

2 Answers

Want to turn off voicemail Don't know codes


Hi,

To turn off voice mail please dial ##002#, this would do the trick.

Regards

Oct 13, 2009 | RCA 25450 4-Line Extended Range Multi...

1 Answer

How do i turn the ringer off of a phone


Ok, gotca.... no ringing at your set, as the title states.

First you need to know the extension of the phone that you want to change. Feature 0 at the phone and hit the intercom key to ensure that we are programming the right phone.

To get into programming press:
-> FEATURE 2 6 6 3 4 4
-> Password: 2 6 6 3 4 4
Now you will have to look at your LCD for 3 arrows
<- Heading..Enter->
<- Back .......Next->

-> you will now see TERMINALS&SETS and press Enter (the top right arrow key) now put in the extn that you want to change.
-> you should now see the extension number of the set and the name that is associated with it, press Enter (the top right arrow key) again
-> now you will see LINE ACCESS and press Enter (the top right arrow) again then LINE ASSIGNMENT and hit Enter again
-> then you will see Show line:____ and hit Scan the scan button
-> it will show something like L002: Appr&Ring now press CHANGE till it says Unassigned
-> keep hitting Scan till all the lines are found, DO NOT REMOVE ANY NUMBERS ABOVE 145, as these are your target lines for your Direct phone numbers (these numbers above 145 may not be there, but just incase)
-> after you find all the Lines, you now hit RLS to back out of programming.

Voila, your phone will not ring anymore except when you receive a direct call to your set -or- via your direct number if you have one.

Apr 16, 2009 | NorStar Meridian M7310 Phone

2 Answers

I have a problem with voice mail with a meridian hooked to NT5806DA-93. The system on voice mail every second pulse off so that only half of each message is played at a half second interval


Voicemail Features Norstar Common To Check Your Voicemail:
1. Press the Check Voicemail key or press the Feature button, then 981
2. Enter your password
3. From here you can listen to messages, change your greeting, change your password, etc.
To Leave a Message for Someone in Your Office:
1. Press the Leave Message key or Feature 980
2. Enter the mailbox number (extension number. of the person you want to leave a message for
3. The display will show the name of the mailbox owner, press OK
4. Leave message
To Access Your Voicemail box from Another Phone:
1. Press the Check Voicemail key or press the Feature button, then 981
2. Press the OTHER softkey
3. At the LOG: prompt, enter your mailbox#(extension #. and your password all together followed by the "#" sign
4. Press the OK softkey
To Access Your Mailbox from Outside of the Office:
1. Call the main office number or your DID (if applicable.
2. If the call is answered by a receptionist, have them transfer you to your voicemail box
3. If the call is answered by the company greeting, or your personal greeting, Enter: * *
4. At the prompt, enter your mailbox #(extension #. and password all together
To Transfer Someone to a Voicemail Box:
1. Press the Transfer to Voicemail key or press the Feature button, then 986
2. Enter the mailbox # (extension#.
3. The display will show: Call Transferred
To Change Your Personal Greeting:
1. Press the Check Voicemail key or press the Feature button, then 981
2. Enter your password
3. Press the ADMIN softkey
4. Press the GREET softkey
5. Press the REC softkey
6. Press the PRIME softkey
7. Press the YES softkey
8. At the tone, record your new greeting, press the OK softkey to end your recording and then the OK softkey again to accept the new recording
To Record Your Alternate Greeting (Used when on vacation or out of the office.:
1. Press the Check Voicemail key or press the Feature button, then 981
2. Enter your password
3. Press the ADMIN softkey
4. Press the GREET softkey
5. Pres the REC softkey
6. Press the ALT softkey
7. Press the YES softkey
8. At the tone, record your new greeting, press the OK softkey to end your recording, then the OK softkey again to accept the new recording.
9. You then need to have your voicemail box now play the Alternate Greeting, Press the GREET softkey
10. Press the ChOOSE softkey
11. Press ALT softkey
12. Display will show: "Accept msgs: Y", Press the OK softkey to have your voicemail box accept messages while your Alternate Greeting is turned on, or press the CHNG softkey to change the "Y" to an "N" if you do not want your voicemail box to accept messages.
13. When you return to the office, make sure you go back into your voicemail box and have it play the PRIME greeting
Norstar Voicemail Administrative Programming Programming must be done from any M7310, T7316, or M7324 model phone set.
To Log Into System Administration:
1. Enter Feature 983
2. The display will show "LOG", enter your login password
a. If your company extensions are 2 digits long enter "120000"
b. If your company extensions are 3 digits long enter "1020000"
c. If your company extensions are 4 digits long enter "10020000"
3. Press the softkey under "OK"
To Create a New Mailbox:
1. Log into system administration
2. Select the softkey under "MBOX"
3. Select the softkey under "ADD"
4. Enter the mailbox number (extension. you want to add
5. Mailbox type: Subscriber and then select "OK"
6. Extension: Usually the same as the mailbox number
7. Service Class: Enter 1
8. Name: Enter the name using the dial pad. Enter last name first, press "# #" to enter a comma, and then enter the first name. When spelling the name, press # to move to the next character
9. Directory: Y (Yes.
10. Message Waiting: Y (Yes.
11. Out dial: Pool, enter 1 and then OK
12. Accept: 1, select OK
To Delete a Mailbox:
1. Log into the system administration
2. Select the softkey under "MBOX"
3. Select the softkey under "DEL"
4. Enter the mailbox number (extension. you want to delete
5. Select the softkey under "Delete"
To Reset a Mailbox Password:
1. Log into system administration
2. Select the softkey under "MBOX"
3. Select the softkey under "Chng"
4. Enter the mailbox number you want to reset the password for
5. The display shows "Reset Password"
6. Select the softkey under "RESET"
7. Press the release key
*The new password will be "0000", the system will ask the user to change this the first time they log into their mailbox using this password.
To Change the Name on a Mailbox:
1. Log into system administration
2. Select the softkey under "MBOX"
3. Select the softkey under "Chng"
4. Enter the mailbox number (extension. you want to change the name on
5. The display shows "Reset Password"
6. Select the softkey under "Next", keep hitting "Next" until the display shows the name
7. Select the softkey under "Chng" to enter a new name
8. Enter the name using the dial pad. Enter last name first, press "# #" to enter a comma and then enter the first name. When spelling the name, press "#" to move to the next character
9. Select the softkey under "Next" to save the change
10. Hit the release button

Apr 15, 2009 | NorStar Lands Phones

3 Answers

Change name on a Nortel M7324


1. Press the Rls button then ** FEATURE 266344 (CONFIG)
2. Password is 23646 (ADMIN) The display reads Terminals & Sets
3. Press SHOW ans enter the Extension for which you want to enter a name.
4. Press SHOW, again
5. Press the NEXT key until the display reads NAMES at the top left corner.
6. The bottom right corner reads CHANGE, press the far right soft key.
7. To move from one letter to the next use the far right and far left soft keys or the # key.
8. When you are finished Press next.
9. Press the HEADING key to get back to TERMINALS & SETS and start again!

Navigation Keys: Line 1 = HEADING Speed Dial = SHOW
Line 2 = BACK Last No. = NEXT

This can only be done from the main handset and only one at a time. The Soft Keys are the three small buttons right bellow the screen.

Jan 28, 2009 | NorStar M7324 Telephone

2 Answers

Comdial 7260-00


This will fix your issue

Do this:

Feature # *
Hit # (8) times
Hit show
Enter 04-05-101~156 (101~156 is whatever extension number you are trying to change)
Press chg
Use the keypad to change the name pressing # after each letter
When you are done entering the name make sure you press # after the last letter or it won't show
pick up and hang up the handset

DONE

Apr 04, 2008 | Comdial 8324S-PT Corded Phone

2 Answers

Setting the clock on a Comdial DX-80 Digital phone


To change Comdial phone read out time

feature
#
*
######## (8 pounds)
show
0814
save (System time)
show (Year)
next (Month)
next (Day)
next (Weekday)
change enter what you want to change

Mar 25, 2008 | Lands Phones

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Comdial Lands Phones Experts

george  peters
george peters

Level 3 Expert

860 Answers

k24674

Level 3 Expert

7993 Answers

Tom Chichester

Level 3 Expert

34148 Answers

Are you a Comdial Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...