Question about Philips 43P8341 43" Rear Projection Television

1 Answer

Not a good clear picture.

Picture is not very good,can't ajust the color.can't get picture to come
in clearer,either to dark or to lite.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Filmmaker:

    Uploaded 5 video answers.

  • Expert
  • 162 Answers

I have a philips magnavox and had two problems that I recently fixed using kits from www.TvRepairKits.com. I can't say enough about their kits and help. Without them I would have never been able to fix my TV set myself.

The first problem I had was the TV was looking 3D. After doing some homework I found out that this is a convergence problem. I bought a kit, followed the instructions, and to my amazement fixed it myself.

After building my confidence with the 1st repair I decided to get their CRT fluid kit. This kit fixes the dull video,red video, or bright/halo looking video. If you have a magmavox set that is more than 5 years old your tv has this problem already. It happens on every set. As before I bought the kit, followed the instructions, and now my video looks factory new. Once again I wanted to say thanks to the team at Tv Repair Kits for putting together kits that the average joe can use.

ML

Posted on Aug 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dark picture on quasar sp5133b


There are two possibilities the first is A bad picture tube which would be too expensive to repair or it could be the capacitor in the 220 volt source which is derived from the flyback transformer most likely it is 10MFD @ 350 WV or close to that

Nov 27, 2012 | Quasar Televison & Video

1 Answer

I have a Philips 60PP9202 60 in. Rear Projection HDTV-Ready Television. I do not have a remote for it, which I am going to purchase ASAP. When I press the up/down channel button on the TV it changes the...


Ur tv have a convergence problems.Ur convergence board the two convergence ICS,and some or all it resistors are dead.U know how to solders?U have soldering tools,and solders.Tries Websites like Tv repair World.com,Tvrepairkits.com to buy a convergence kit to repair it ur self.The shop will cost u $300-350 for parts and labors.

May 10, 2010 | Philips 60PP9202 60" Rear Projection...

1 Answer

Red and green are moving away from each other . projection tv not clear this way.


First you can try to adjust the convergence in the menu. You should be able to move the colors together to get a clearer picture. If that doesn't work, you most likely have a color driver issue and should contact a repair service.

Apr 12, 2010 | Philips Magnavox 51MP392H Rear Projection...

2 Answers

Picture djust


Put it in the custom mode.Put the contrast to the max.Put every things in middles may be colors for less.Now u have the desire ajustment u want?

Aug 19, 2009 | JVC AV-27530 27" TV

1 Answer

Screen too dark, don't know how to ajust it


go to control panel, personalize, display setting & change setting to 1280 by 800 pixels and chande color to the highest 32 bits

OR go to control panel, then click device manger, click display adapter make
Sure you have just one display driver install

Jul 11, 2009 | Acer Aspire 5100 Notebook

1 Answer

VEIWFINDER IS BLURRY CANNOT SE OBJECTS CLEARLY


At the bottom of the eye piece there is a little slider than you can move up and down to adjust the focus. That should fix your problem if not then you are not looking into the eye piece close enough make sure your eye is pressed up against the little rubber pad and then adjust the focus.

Apr 23, 2009 | Cameras

1 Answer

The screan is dark on the top and bottom and color is strong


This not the correct Model #, this model is a DLP set and does not have picture tubes and associated lenses. Did you remove the mirror? Does your set have a fold in back? I suspect the back is not fully out in the correct viewing position.

Dec 20, 2008 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Sharp 32sf560 TV


Good day
You an adjust the screen brightness on the rear portion of your units flyback. Then the intensity of the color will change.


chris

Feb 02, 2008 | Sharp 32C241 TV

Not finding what you are looking for?
Philips 43P8341 43" Rear Projection Television Logo

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

matt martin
matt martin

Level 3 Expert

1213 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...