Question about The Watches

1 Answer

My Dfit Heart rate watch randomly resets for no reason when it is not connected to Bluetooth. What is the problem?

Posted by on

  • johnny rebel Apr 19, 2017

    you may be pushing on the face of the watch,or may have gotten some water inside it,it is only water resistant,I cant get a user manual without buying a watch,so,your best bet,is take it back to where you got it and exchange it,sorry,spent alot of time looking for help,they are from china and everything is in chinese.

  • johnny rebel Apr 19, 2017

    https://youtu.be/bMtFODsUa1I

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 604 Answers

Dead battery

Posted on Apr 18, 2017

Testimonial: "but the battery is not dead"

  • johnny rebel Apr 19, 2017

    then it needs to be connected all the time or send it in for repair,Charging time lasts for 30 minutes and normal standby time lasts for 3 to 5 days.read your manual that came with it

  • Hadi Alhamdani
    Hadi Alhamdani Apr 19, 2017

    I have a manual that I have read many times and it doesn't talk about anything about if it is not connected to Bluetooth or about troubleshooting. but thanks for the help. I appreciate it.

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

jgwhomeequip
  • 1902 Answers

SOURCE: Inaccurate Measurements of heart rate

Replace the battery. Then make sure that it is placed on the proper artery that it is supposed to be on. If your heart rate was 210 you would be in the hospital with a heart attack. And also the only person I know with a heart rate of 90 when running is Lance Armstrong. Your heart rate should be about 120 to 135 and it will just around in those areas but should never go higher

Posted on May 22, 2009

  • 2501 Answers

SOURCE: Sportline S7 HRM watch users guide?

To get a manual for your monitor, go to "sportline.com",

Select "products" and then "see products" in heart rate monitors.

Go through the list of models to find yours and then click on "learn more".

Details of the monitor will be shown and you then click on the tab marked "manual".

Download your manual.

Posted on Jan 27, 2010

Testimonial: "thanks :)"

escapement
  • 2334 Answers

SOURCE: lost manual Sportline heart rate watch

Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all SPORTLINE watch manuals. Rate me, please.

Posted on Feb 26, 2010

escapement
  • 2334 Answers

SOURCE: how do you turn on the heart rate monitor on a

Click on my profile (escapement), then click on Tips and Tricks. There you will find links to all watch manuals. Rate me, please .

Posted on Apr 20, 2010

  • 1 Answer

SOURCE: Sportline 915 heart rate watch 2nd mode questions

the number is for your age, the F or M is for female or male. this will give a more accurate percentage for your heartrate

Posted on Dec 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Heart rate is off, how do you turn it back on.


Press and hold the reset button, for 5 seconds, while in Time mode. The heart monitor will reset and you should see the heart symbol appear.

Mar 30, 2011 | Sportline 915 Solo Heart Rate Watch

Tip

Trouble with heart rate monitor reading heart rate.


Can't get a heart rate to show on your heart rate monitor? If there are no other issues with the watch, then most likely what you are experiencing is an issue with the Heart Rate Strap.

It is very common for all brands of heart rate monitors to have issues with measurement.

The #1 reason is poor contact with the strap and your skin. - Make sure the contacts are wet and touching the skin with good contact.
#2 reason - Weak battery, may need to replace.
#3 reason - Sensors on strap have salt build up from sweat - Clean the strap and contacts with soap and water, if deep cleaning is neccessary use a q-tip and some rubbing alcohol.
#4 reason - Strap is too low on the body, raise as high on the chest as possible to just under the breasts. Strap too low will cause a weak signal.

If none of these seem to help, then you should contact an authorized repair center or the customer service for your brand, and see about possible repair or exchange/ return.

on Dec 06, 2010 | Watches

1 Answer

How do I reset the chronograph? Once I start it I can't find a way to reset it.


In heart rate mode, click reset to go to Calorie burned mode. In that mode press and HOLD reset button and this should reset all lap,calorie data. etc

Jan 06, 2011 | Sportline 1010 Duo Heart Rate Monitor...

1 Answer

I just put a new battery in the Polar F4 heart rate monitor watch and it does not work. The battery died about 2 years ago and I never replaced it until now. How can I get the heart rate monitor working...


This is a common issue. The Polars and other Heart Rate monitors are not designed to be fixed by the consumers except for very specific models. These only look like watches, they are in fact mini computers and very susceptible to internal damage if not handled properly.

You need to send the unit it to a Polar Authorized Service Center to have fixed properly. There is not reset within the computer, if you had done everything correctly then it would work.

Dec 12, 2010 | Polar F4 Heart Rate Monitor Watch

1 Answer

I changed the battery in the f6 . I had erratic readings. Now watch seems fine but it wont read heart rate,,,,I get no heart beat at all .


Check out my tips and tricks section for a guide on troubleshooting heart rate readings.

One other possibility if you changed the battery yourself (never recommended) is that some damage or moisture has gotten into your watch and made it impossible for the watch to read heart rate. This is a more common reason than you think and why all manufactures of Heart Rate monitors and other types of watches have you send them in to their authorized service centers.

Dec 08, 2010 | Polar F6 Wrist Watch

1 Answer

The heart rate function has turned off. So the calorie count won't work. Everything else is working fine. It happened about four days ago. I have lost my owners manual.


Press and hold the reset button, for 5 seconds, while in Time mode. this will reset the heart monitor and the symbol will reappear on the screen.

Nov 26, 2010 | Sportline 915 Solo Heart Rate Watch

1 Answer

How do you turn the heartrate monitor on?


How do I turn the Heart Rate function on and off on my watch? Within the Date and Time screen, if the heart icon is showing, the heart rate function is on. To turn off the heart rate function, simply hold the Reset button until the heart icon goes away.

Aug 14, 2010 | Sportline C9 by Champion Fitness 910 Watch

3 Answers

Lost manual Sportline heart rate watch


Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all SPORTLINE watch manuals. Rate me, please.

Feb 26, 2010 | Sportline C9 by Champion Fitness 910 Watch

Not finding what you are looking for?
Watches Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top The Watches Experts

John mullen

Level 3 Expert

294 Answers

D. E. Hev

Level 3 Expert

1167 Answers

 Larry
Larry

Level 2 Expert

115 Answers

Are you a The Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...