Question about Kenwood Audio Players & Recorders
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Your problem is caused by a blown fuse on the main board 6.3amp 125volt time delay fuse replace with the exact same type. The reason the fuse blew is most likely because they is a problem with the amp.
I suspect one of the finals is blown 2SD2560 or 2SB1647. Open the case and with the power unplugged replace the fuse, next unplug the 4pin connector from the amplifier board 3 black wires and one red.
now plug in the RXD-A53 and turn it on. you should now have the display working and no clicking.
unplug it from the wall and reconnect the 4 pin connector and now plug it back in and turn it on if the fuse blows again take it to a qualified service technician, the above noted output transistors will run you about 6 bucks a piece they are 4 of them 2 of each for each channel plus labor.
Posted on Apr 08, 2009
I have a Kenwood hi-fi system XD Series. the three disc draw won't open or play discs. The table shudders when on...can anyone please find a repairer in the adelaide district.
Posted on Feb 10, 2010
Tips for a great answer:
Oct 04, 2013 | Audio Players & Recorders
Jun 13, 2012 | Audio Players & Recorders
KENWOOD entertainment system
Turn power on at wall
Clock is flashing
Press up/down to set Hour
Press up/down to set minute
Press power on buton
Feb 13, 2012 | Car Audio & Video
Dec 02, 2017 | Kenwood Audio Players & Recorders
Dec 04, 2009 | Kenwood Audio Players & Recorders
56 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: