Question about Panasonic NN-H504WF Microwave Oven

1 Answer

Will not cook or will not warm

I have 2,2 cu.feet inverter microwave oven. It keep shutting after 3 second. When I tried to cook on sensor mode it shut down after 10 second. It does not cook at all.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 120 Answers

Your temperature sensor inside on the microwave need to rreplace. It maybe dirty or faulty. Bring your microwave to electronics technician to check it.

Posted on Jul 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Microwave will not operate unless I slam the door shut then program to cook.


of course it is , most likely needs a new door switch .

Oct 21, 2015 | Microwave Ovens

1 Answer

Microwave arching


faulty microwave module replace it

Apr 22, 2015 | Sharp R530EWT Countertop Microwave Oven...

1 Answer

GE microwave not heating, sensor error.


first suspect is the inverter board (power) and magnatron a distant second----in either case the part involved unless an expensive unit is pricey.

Aug 26, 2012 | GE SpaceMaker Microwave Ovens

1 Answer

It is actually NN-T695SF, it will not warm food. It powers up then goes dim, then powers up then goes dim, it keeps doing that. Food comes out cold.


Hi, if it is an inverter microwave and the problem is cycling every 2-3 seconds, my experience is the magnetron has most likely gone short circuit and the inverter board is shutting down to protect itself and then restarting, hence your symptom.
DO NOT try to test this unless you are experienced with extra high voltages - the voltages present/stored in a microwave even when powered off can kill you.

Aug 13, 2010 | Panasonic NN-T694SF Microwave Oven

1 Answer

Panasonic NN-S254BF microwave oven runs for 2-3 seconds and then shuts off'


See if this describes what's happening:
  • Put in time, push start and unit runs for 2 seconds, relay clicks, unit goes off. Cook time on display goes off and clock time comes back. Bad upper interlock switch and charred connector
If so, see http://207.234.249.73/mwd/safety.txt , http://207.234.249.73/mwd/disassembly.txt and http://207.234.249.73/mwd/doorsw.txt

Otherwise, if the digital programmer circuit / controller does not get a feedback signal from the inverter for a period of 3 seconds, the controller will stop the cook cycle.

That may be a loose connection in the wiring between the inverter, magnetron, and/or control board, or maybe one of those components has failed.


Due to the lethal voltages used and produced in inverters, I do not recommend that an inexperienced person work on these.

You can find an authorized Panasonic servicer here.

In Canada, you can find an authorized Panasonic servicer here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

May 31, 2010 | Panasonic NN-S254BF Microwave Oven

1 Answer

Power to microwave but does not cook food


You didn't mention your brand or model number, but I'll assume it's a Panasonic since you posted this under a Panasonic category.

See if this describes what's happening:
  • Put in time, push start and unit runs for 2 seconds, relay clicks, unit goes off. Cook time on display goes off and clock time comes back. Bad upper interlock switch and charred connector
If so, see http://207.234.249.73/mwd/safety.txt , http://207.234.249.73/mwd/disassembly.txt and http://207.234.249.73/mwd/doorsw.txt

Otherwise, if the digital programmer circuit / controller does not get a feedback signal from the inverter for a period of 3 seconds, the controller will stop the cook cycle.

If it stops after 7 seconds, it has a problem with the inverter.

If it stops at 16 seconds and is a sensor model, it probably has a defective humidity sensor.

If it stops after 22 seconds, that means the controller has detected a problem, usually a problem with the inverter, controller, magnetron, or a bad connection from one or the other.

Display codes H95, H97, H98 or H99 mean that there's a problem with your inverter, magnetron, or digital programming circuit.

That may be a loose connection in the wiring between the inverter, magnetron, and/or control board, or maybe one of those components has failed.

Due to the lethal voltages used and produced in inverters, I do not recommend that an inexperienced person work on these.

You can find an authorized Panasonic servicer here.

In Canada, you can find an authorized Panasonic servicer here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

May 26, 2010 | Panasonic NN-H264 Microwave Oven

2 Answers

Panasonic Genius Sensor 1300W


See if this describes what's happening:
  • Put in time, push start and unit runs for 2 seconds, relay clicks, unit goes off. Cook time on display goes off and clock time comes back. Bad upper interlock switch and charred connector
If so, see http://www.microwavedisplay.com/safety.txt , http://www.microwavedisplay.com/disassembly.txt and http://www.microwavedisplay.com/doorsw.txt

Otherwise, if the digital programmer circuit / controller does not get a feedback signal from the inverter for a period of 3 seconds, the controller will stop the cook cycle.

That may be a loose connection in the wiring between the inverter, magnetron, and/or control board, or maybe one of those components has failed.


Due to the lethal voltages used and produced in inverters, I do not recommend that an inexperienced person work on these.

You can find an authorized Panasonic servicer here.

In Canada, you can find an authorized Panasonic servicer here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Aug 30, 2009 | Panasonic NN-SN657SMicrowave Oven

1 Answer

Panasonic microwave shuts off


If the digital programmer circuit / controller does not get a feedback signal from the inverter for a period of 3 seconds, the controller will stop the cook cycle.

Due to the lethal voltages used and produced in inverters, I do not recommend that an inexperienced person work on these.

You can find an authorized Panasonic servicer here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Dec 25, 2008 | Microwave Ovens

1 Answer

Microwave runs for 3 seconds and shuts off


This is an inverter-driven model, and this is one way the inverter fails. Often it will tick, too, but the cooling fan may be too loud to hear ticking. If you haven't had smoke, then it may not yet catastrophic. I would bet that a thorough resoldering would take care of it. A good technician can troubleshoot and repair this, as needed, but often they will just replace the inverter. Sometimes that's actually cheaper. Troubleshooting an inverter is way too much for someone without good solid technical experience. I would call a shop and ask for an estimate to replace the inverter. Good luck.

Oct 13, 2006 | Panasonic NN-S252WF Microwave Oven

Not finding what you are looking for?
Panasonic NN-H504WF Microwave Oven Logo

382 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9047 Answers

Devabhakthuni...
Devabhakthuni...

Level 2 Expert

225 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Panasonic Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...