Question about Pioneer Televison & Video

1 Answer

55'' rear projection Phillips (dptv335) Red Tint in 4:3 area

55'' rear projection Phillips (dptv335). just ordered a convergence repair kit as i lost the convergence capability. saw the answer here. question is, i have had a red tint in the 4:3 area of the screen(like a burn in) for a while. When in widescreen, the bars that would be black during 4:3 on the sides have a great clear picture, but red tint in the 4:3 area. What causes this and how to fix, and how much$$$?

Posted by on

  • 1 more comment 
  • poster72 Jul 24, 2009

    when i read that first yesterday on this site, i thought it was a joke. like muffler bearings for example. hehe.



    How much should one expect to get a tech to come replace something like that? hundreds? cuz lcd's are so cheap these days! ive already spent $70 on a covergence chip set or whatever, as its out of whack and unable to adjust right.

  • poster72 Jul 24, 2009

    Jul 24, 2009 - when i read that first yesterday on this site, i thought it was a joke. like muffler bearings for example. hehe.

    How much should one expect to get a tech to come replace something like that? hundreds? cuz lcd's are so cheap these days! ive already spent $70 on a covergence chip set or whatever, as its out of whack and unable to adjust right.

  • poster72 Jul 24, 2009

    sorry about that double post, but one more question. Wouldnt it be red on the whole screen if that was the case? It really is fine on the sidebars that exist when in 4:3 mode when you're watching something in widescreen.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Pioneer Master
  • 1,779 Answers

Sounds like your fluid in the CRT's need replaced. I would recommend a servicer take care of that problem. The corrosion that ethylene glycol can do to components is vast if you spill it on any of the PC boards. ( You know it as Anti-freeze ). Play it safe---Make a Call.!

Posted on Jul 24, 2009

  • Jim Krause Jul 24, 2009

    It's usually about $300.00, might think about cutting your losses now?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Im looking for a projection alighment chip for 60pp9202/17f phillips


you will require two of the STK392-120 Convergence ICs and possibly the 6.8 ohm resistors. The Phillips DPTV305 - DPTV335 convergence repair kit available from www.tvrepairworld.com has the two ICs and the 12 resistors plus the CD with repair instructions.

Sep 25, 2011 | Philips 60PP9202 60" Rear Projection...

1 Answer

My tv shows doble colors how do i fix it


Thats a convergence issue. You can get the Phillips DPTV305 - DPTV335 convergence repair kit from www.tvrepairworld.com which fits your model and also includes the step by step instructions for the repair.

Jun 28, 2011 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

My TV has a double picture?


The convergence ICs need replacement and possibly the 6.8 ohm resistors. You can get the phillips DPTV305 - DPTV335 convergence repair kit from www.tvrepairworld.com which fits your model. The kit contains both ICs and the 12 resistors pluds the cd with repair instructions.

Nov 09, 2010 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

2nd time--i have a phillips projection tv, can't read all of mod. #5----63h/17.( measures 55 inches diag.) 2004 nov.,dptv335, 347h, e 10839 receiver, no man. 2nd owner. My problem is the tv has a double...


Thats caused by failed convergence ICs your model uses two STK392-120 ICs and 12 resistors 6.8 ohm 1watt. You can get the DPTV305-345 convergence repair kit which comes with instructions from www.tvrepairworld.com

Apr 01, 2010 | Televison & Video

1 Answer

I have a philips dptv310 55'' rear projection tv... everything works but picture is in constant red tint... any fixes


The Phillips are famous for the coolant needing replacement in the blue and green CRTs which make the screen take on a red tint and the pic will appear dull. You can get the Phillips coolant Kit at www.tvrepairworld.com The kit also contains the CD with instructions

Nov 26, 2009 | Televison & Video

1 Answer

Picture looks like its red and green 3-d,Phillips 55pp935217


Ur convergence it dead,Need a convergence kit,use what in that kit,Know how to solder righht?Tries Tv Repair World.com,Ebay.com.

Oct 06, 2009 | Philips 55PP9363 55" Rear Projection...

1 Answer

Phillips 55 inch rear projection tv red convergence screwed up


Install the DPTV305_DPTV345 Chassis convergence repair kit. You can get the kit at the following link and it contains the parts plus instructions on CD.
http://www.tvrepairworld.com/

Jul 25, 2009 | Philips 60PP9202 60" Rear Projection...

1 Answer

Philips 55PW9363 looks 3d


You need to replace both convergence ICs they are STK392-120 this is an easy repair that you can do yourself and save yourself around 400.00 for about 45 minutes work. You can order the new ICs at the following link and they provide free installation instructions with pictures and also free online support with a support tech while you do the repair. I am one of their support techs. You would also want to order at least 4 convergence resistors and they send the proper ones for your model as often a couple resistors go. Your model uses 6.8ohm 2watt 5% metal film resistors. So to recap you will need (2) STK392-120 Convergence ICs and (4) Convergence ICs . very inexspensive repair if you do it yourself. here is the link.
http://servicemanuals.vstore.ca/

Apr 12, 2008 | Philips 55PW9363 55" Rear Projection...

1 Answer

Phillips DPTV335 colors out of alignment


you need 2 Convergence ICs STK392-120 you can get them at this link and they provide free step by step instructions with free tech support so you can do the repairs yourself.
http://servicemanuals.vstore.ca/

Mar 16, 2008 | Philips 55PW9363 55" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

304 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...