Question about HP Officejet 5610 All-In-One InkJet Printer
I removed and replaced both cardridges on my HP 5610 and I am getting a message to remove and replace black cardridge because it is not installed correctly. I have removed and replaced them several times and I know that they are sitting in there correctly but it is still giving me that message. thanks
Try with another cartridge, maybe you have a faulty one.
try cleaning the connectors on both printer and ink cartridge.
Posted on Nov 25, 2007
This is off the HP web-site Fix #3 worked for me.
When attempting to scan to a computer using the scan to function on the front panel, a No Scan Options: Refer to device documentation to troubleshoot error message displays on the All-in-One control panel.
To resolve the issue, follow the solutions below in the order presented.
Solution one: Verify that the Digital Imaging Monitor is ready
The Digital Imaging Monitor must be running for the scan to feature to function. The Digital Imaging Monitor normally displays in the system tray in the bottom-right corner of the computer screen, which is next to the time. The Digital Imaging Monitor is ready when a check mark displays on the icon. This can take some time after startup to complete the initialization and for the check mark to display on the icon.
If the Digital Imaging Monitor displays in the system tray, proceed to Solution two - Populate the destination list .
If the Digital Imaging Monitor does not display in the system tray, complete the following steps for Windows 98, ME, and XP.
Posted on Jan 22, 2008
Went to this HP site and was able to fix. http://h10025.www1.hp.com/ewfrf/wc/document?docname=buu02180&lc=en&cc=us&dlc=en&product=441125&rule=45466&lang=en
Posted on Dec 02, 2007
Tips for a great answer:
Put the new cartridge inside of your Officejet J4580 by inserting it, label facing upward, into the open slot. Press it back into the unit and down lightly. You will hear it click into place. Close the access door. Wait for the alignment process to complete that will most likely require you to print a alignment page and place it in the scanner bed then press "OK".
I think thats about it
Dec 31, 2010 | HP OfficeJet J4580 All-In-One Laser...
Sep 16, 2010 | Epson Stylus C66 Inkjet Printer
Aug 22, 2009 | Epson Stylus C46 InkJet Printer
Jul 23, 2009 | Dell 924 All-in-One InkJet Printer
Jul 28, 2008 | Lexmark X1270 All-In-One InkJet Printer
Jul 14, 2008 | Printers & Copiers
1,165 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: