Question about Kodak EASYSHARE 5500 All-In-One InkJet Printer

1 Answer

How do i replace my new printhead for my 3in1 5300 printer

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 87 Answers

At the top of the print head where the ink cartridges go in that is the cradle the print head on mine at the top and in the center there is a tab that you pinch to pull it out. Then set the new one in a push in the center of the top of the print head make sure it snaps into place.

Posted on Jul 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hp printer model A909a indicated new ink cartridge needed. When I installed new cartridge kept giving message needed new cartridge. When I removed new cartridge ink was leaking on outside edge of...


Follow the instructions below to replace the printheads in the All-in-One product.
Video of replacing the printhead
The following video demonstrates how to replace the cartridges and the printhead. You do not necessarily need to replace the cartridges. Simply refer to the video for replacing the printhead, and then stop the video.

">

Aug 28, 2010 | HP Office Equipment & Supplies

2 Answers

Replace print heads. How?


REPLACING HP PRINTER, PRINTHEADS


Follow these steps to replace the printheads in your printer.
  1. Press the Power button (c00636182.gif ) to turn on the printer.
  2. Open the top cover.
  3. Press and hold the Resume button (c01219285.bmp ) until the carriage moves to the left. CAUTION: Be careful not to proceed until the carriage is on the left side of the printer. If the carriage does not move to the left automatically, turn the printer off and back on and then try holding down the Resume button (c01219285.bmp ) again. The printhead can be damaged if the carriage is not all the way to the left for installation.
  4. Lift the printhead latch. Figure 3: Lifting the printhead latchc01290070.gif
  5. Lift the handle of a printhead and use it to pull the printhead out of its slot. Figure 4: Removing the old printheadc01295543.gif
  6. Shake the new printhead at least six times while the printhead is still in its packaging. Figure 5: Shaking the new printheadc01134519.gif
  7. Remove the new printhead from its package, and then remove its orange protective caps. Figure 6: Removing the protective capsc01134520.gif CAUTION: Do not shake the printheads after removing the orange protective caps.
  8. Insert the printhead into its color-coded slot (the label on the printhead must match the label on the printhead latch). Press down firmly on the printhead until it snaps into place. Figure 7: Inserting the new printheadc01290071.gif
  9. Pull the printhead latch all the way forward, and then press down until the latch engages. Figure 8: Closing the printhead latchc01290072.gif
  10. Close the cover. Figure 9: Closing the coverc01290073.gif
  11. The printer should align the printheads automatically in a few minutes, printing an alignment page. If it does not, go to the next section to align manually.
Align the printheadsIf you installed the HP software, use the instructions in the left column below. If you installed a Plug and Play driver or other driver, use the instructions in the right column.

Mar 05, 2010 | HP Office Equipment & Supplies

1 Answer

How to replace the printhead in my kodak printer


Please visit www.kodak.com/go/printheadsupport and click on 3 rd link installing or replacing a printhead.It will show u through diagrams how to take the old printhead out and install the new one. If you do not have new printhead ,kindly call Kodak at 1800 421 6699 and they will send you new printhead after diagnosing your problem. Enjoy.

Dec 01, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

2 Answers

How do i remove old printhead and install new one


Replacing the printhead If your printhead is damaged or broken, you may replace it yourself.
  1. Make sure your printer is turned on.
  2. Open the printer access door by lifting from the recessed hand-holds on the sides of the unit. autourg00977009id2130369.jpg
    The printhead moves to an accessible position for handling the ink cartridges. The ink cartridges are seated in the printhead.
    autourg00977009id2128017.jpg

  3. Pinch the latch on the ink cartridge with your thumb and forefinger and lift it out of the print head. Remove both ink cartridges.
    autourg00977009id2128160.jpg

    caution.gif CAUTION:
    Insert the ink cartridges into the newly installed printhead as soon as possible to prevent any drying of the ink.
  4. Unlatch the printhead by lifting the rectangular latch on the top of the printhead.
    autourg00977009id2128257.jpg

  5. Remove the old printhead from the carriage .
    autourg00977009id2128328.jpg

  6. Remove the new printhead from its bag.
    autourg00977009id2128380.jpg

    caution.gif CAUTION:
    Do not touch copper contacts on the printhead, as this may damage it.
  7. Remove and discard the black plastic casing and the orange protective cap.
    autourg00977009id2128411.jpg

  8. Place the new printhead into the carriage.
    autourg00977009id2128461.jpg

  9. Push firmly against the target label on the printhead until you hear it click into place.
    autourg00977009id2128526.jpg

  10. Re install the ink cartridges. As needed, see Replacing ink cartridges.
    autourg00977009id2128574.jpg
  11. Close the printer access door. The printer should now complete a printhead calibration to ensure that it is ready to for normal operation.

Nov 23, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Replacement of printhead for easyshare 5300


kodak offers free replacement of printheads,if u have new printhead, log on to www.kodak.com/go/printheadsupport and u can see how to install new printhead. call kodak 1800 421 6699 for further issues

Jul 18, 2009 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Have new printhead to replace old one . need to know how to get old one off. and install new printhead


Go to kodak.com/go/printheadsupport it shows live demo on how to replace the printhead. Enjoy .

Apr 29, 2009 | Kodak ESP 5 Printer

5 Answers

How do I remove old printhead and install a new one?


open the access door at the top of the printer

Remove the ink cartridges

Put your finger in the upper left corner of the printhead ( inside)

you will feel a small latch rigth there push it upward

the printhead will loose and you may now remove the printhead

Jan 24, 2009 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Print head problem


Dear palia1234,
Blinking in orange 5 times indicates that the printhead error occurs. You need to replace the printhead with a new one. But be careful before replacing the printhead, check your printhead if any smoke smell or indication of short circuitry present. Replacing the printhead in this case will harm new printhead. You'd better to take your printer to the nearest service center.

Regards,

Source:
Canon Inkjet Printer Forum

Nov 08, 2008 | Canon PIXMA IP5200 InkJet Photo Printer

1 Answer

HP D135 - replaced printhead - still doesn't print in that color


try this link : I followed the directions and fixed the problem. the instructions that came with the new printhead weren't really complete.

Here's essentially all I did for my fix - Opened the printer top, turned the printer off. Removed the "bad" printhead, cleaned the metal contacts on the printhead and printer with windex. Closed the printer. Turned it on. waited for it to reset. Opened the printer. Turned the printer off again. Installed the printhead. Closed the lid. Plugged the printer in again. When it was ready I accessed the HP toolbox and alligned the printheads and cleaned the printheads. It worked. Here's a link with photos.


http://h10025.www1.hp.com/ewfrf/wc/document?docname=bpa02107&lc=en&cc=ca&dlc=&product=64986

Oct 18, 2008 | HP OfficeJet D135 All-In-One InkJet...

Not finding what you are looking for?
Kodak EASYSHARE 5500 All-In-One InkJet Printer Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Cindy Wells

Level 3 Expert

5062 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...