Question about Kenmore Elite 45986 Front Load Washer

1 Answer

Older style kenmore top load washer wont do anything....

Washing machine just sits there and wont do anything (as if unlpugged from power and water). I turn the knob and nothing....... is this a timer problem ??

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 57 Answers

This machine has an on/off switch built into the timer that is activated when you push/pull the knob.
Either something therein is worn or broken causing this switch to not function. I myself could probably fix this problem and have done so on occasion, but an inexperienced person might find it to be a challenge.
Replacing this timer is expensive unless you can find a used part somewhere.

Posted on Jul 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace water pump on kenmore washer 70 secerise


If that is the older belt driven style you lay it over and remove a few bolts and hoses. It is not too difficult. The new style is even easier. the pump mounts with 2 clips on the motor.
themobilian_3085.jpg

More here

Let me know if I you need further assistance
themobilian_3086.jpg

Oct 28, 2011 | Kenmore 22422 Top Load Washer

1 Answer

Kenmore Series 70 Washing Machine - won't drain water


WHAT IS WRONG WITH YOUR WASHING MACHINE?

small_11_21.jpg For a detailed Washing Machine illustration, click below.

redarrow.gif Top Load Maytag Style
redarrow.gif Top Load Whirlpool Style
redarrow.gif Top Load GE Style
redarrow.gif Front Load Maytag Style
redarrow.gif Front Load Frigidaire/GE/Kenmore Style
Warning! To avoid personal injury or even death, always disconnect your appliance from its power source--that is, unplug it or break the connection at the circuit breaker or fuse box--before you do any troubleshooting or repair work on your appliance. Also, because some components may have sharp edges, use caution while working on your appliance.

Some problems that can occur with your top-loading washing machine are:

There's an error code on the digital display

It doesn't work at all
It won't drain
It doesn't spin
It doesn't agitate
It's noisy
It leaks
It's off balance
There's no hot water
There's no cold water
It's slow to fill
There's no water at all
The clothes are wet after spinning
The cycle doesn't advance
There's no delicate or regular spin or agitate
It's overfilling
It's underfilling
The water temperature is incorrect


Hope this may help;

DON'T FORGET TO RATE:

Aug 10, 2008 | Washing Machines

1 Answer

My Kenmore 80 series wont do anything. It made a loud noise in the middle of washing clothes, cut off and wont turn on or drain the water or anything. I got all the water out but it still wont do anything.


This assumes that you have a basic Kenmore / Whirlpool top load, direct drive, neutral drain (it doesn't spin until the pump removes most of the water) machine.

First, see the Sears parts site for your washer:
http://www.searspartsdirect.com/partsdirect/index.action

Enter your model number and you'll see a list of major sub-components with diagrams and parts.

The following is the Whirlpool installation, operation and maintenance manual for direct drive washers with a troubleshooting section.

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/f7e2147fa98b28cf85257122007475cb/$FILE/L-55.pdf

From your description, it sounds like a power problem.

The first thing to check is if you have power to the machine. Beyond that I'd work through the Whirlpool troubleshooting.


Sep 25, 2009 | Kenmore Washing Machines

1 Answer

Water problem


Apr 01, 2009 | Washing Machines

1 Answer

Machine wash ,but will not rinse or spin


You have a broken lid switch. Assuming you have the same style washer. The switch is #11,

d0dde19.png

Dec 16, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Machine not draining


WHAT IS WRONG WITH YOUR WASHING MACHINE?

small_11_21.jpg For a detailed Washing Machine illustration, click below.

redarrow.gif Top Load Maytag Style
redarrow.gif Top Load Whirlpool Style
redarrow.gif Top Load GE Style
redarrow.gif Front Load Maytag Style
redarrow.gif Front Load Frigidaire/GE/Kenmore Style
Warning! To avoid personal injury or even death, always disconnect your appliance from its power source--that is, unplug it or break the connection at the circuit breaker or fuse box--before you do any troubleshooting or repair work on your appliance. Also, because some components may have sharp edges, use caution while working on your appliance.

Some problems that can occur with your top-loading washing machine are:

There's an error code on the digital display

It doesn't work at all
It won't drain
It doesn't spin
It doesn't agitate
It's noisy
It leaks
It's off balance
There's no hot water
There's no cold water
It's slow to fill
There's no water at all
The clothes are wet after spinning
The cycle doesn't advance
There's no delicate or regular spin or agitate
It's overfilling
It's underfilling
The water temperature is incorrect


Hope this may help;

DON'T FORGET TO RATE:

Aug 10, 2008 | Kenmore 3.8 cu. ft. HE3 Front Load Washer

1 Answer

Whirlpool Duet Front Load Washer


WHAT IS WRONG WITH YOUR WASHING MACHINE?

small_11_21.jpg For a detailed Washing Machine illustration, click below.

redarrow.gif Top Load Maytag Style
redarrow.gif Top Load Whirlpool Style
redarrow.gif Top Load GE Style
redarrow.gif Front Load Maytag Style
redarrow.gif Front Load Frigidaire/GE/Kenmore Style
Warning! To avoid personal injury or even death, always disconnect your appliance from its power source--that is, unplug it or break the connection at the circuit breaker or fuse box--before you do any troubleshooting or repair work on your appliance. Also, because some components may have sharp edges, use caution while working on your appliance.

Some problems that can occur with your top-loading washing machine are:

There's an error code on the digital display

It doesn't work at all
It won't drain
It doesn't spin
It doesn't agitate
It's noisy
It leaks
It's off balance
There's no hot water
There's no cold water
It's slow to fill
There's no water at all
The clothes are wet after spinning
The cycle doesn't advance
There's no delicate or regular spin or agitate
It's overfilling
It's underfilling
The water temperature is incorrect


Hope this may help;

DON'T FORGET TO RATE:

Aug 10, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

LL SIGNAL ON CONTROL PANEL


WHAT IS WRONG WITH YOUR WASHING MACHINE?

small_11_21.jpg For a detailed Washing Machine illustration, click below.

redarrow.gif Top Load Maytag Style
redarrow.gif Top Load Whirlpool Style
redarrow.gif Top Load GE Style
redarrow.gif Front Load Maytag Style
redarrow.gif Front Load Frigidaire/GE/Kenmore Style
Warning! To avoid personal injury or even death, always disconnect your appliance from its power source--that is, unplug it or break the connection at the circuit breaker or fuse box--before you do any troubleshooting or repair work on your appliance. Also, because some components may have sharp edges, use caution while working on your appliance.

Some problems that can occur with your top-loading washing machine are:

There's an error code on the digital display

It doesn't work at all
It won't drain
It doesn't spin
It doesn't agitate
It's noisy
It leaks
It's off balance
There's no hot water
There's no cold water
It's slow to fill
There's no water at all
The clothes are wet after spinning
The cycle doesn't advance
There's no delicate or regular spin or agitate
It's overfilling
It's underfilling
The water temperature is incorrect


hope this may help;

Regards,
VOTIT


DON'T FORGET TO RATE;

Jul 30, 2008 | Whirlpool Calypso GVW9959K Top Load Washer

3 Answers

My washing machine water wont drain,it is a kenmore 90 series.


  • first thing to check is the lid switch. 
  • if the lid switch is bad it will fill up, then agitate then sit there full of water.

Jul 05, 2008 | Kenmore 24032\24036 Top Load Washer

Not finding what you are looking for?
Kenmore Elite 45986 Front Load Washer Logo

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2180 Answers

fordexpert

Level 3 Expert

5520 Answers

Ed Mac

Level 3 Expert

731 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...