Question about RCA HD52W59 HDTV Projection Television

1 Answer

Hd52w59 Approximately 18 months after purchasing this tv it went blurry. I called an authorized repairman and he was not exactly sure how to fix it but he moved something and the picture was better but still not quite right. He said it might need some part replaced so I decided to have it replaced. The picture was a little better but not nearly as clear as it used to be. About 2 months after that the tv just turned off and would not turn back on. When I called the repairman again, he said it could be anything. I wanted to know if it would be worth putting more money into it as I had already paid out over $200. He said maybe not, that I may just need to invest in a new set. So here I am out $1000 +tax plus the $200 in 18 months. Has anyone had this same trouble and had it fixed? Any advise? Thanks.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 137 Answers
Re: hd52w59

Yust go to conversion menu and set the conversions in line. Is the coulours out or the fucus.

Posted on Dec 23, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer


not sure what board you require . there are several boards in this set and most are no longer available

Mar 26, 2014 | RCA HD52W59 HDTV Projection Television

5 Answers

Top, bottom, and sides of screen are blurry

Hello there,
Being a practical technician I would assist you technicaly.
Please find G-Board in your TV and replace IC1502 & IC1506 (STK392-150)
Before replacement of above said ICs, check follwoing Fuses (PS1501-1502-1503-1504-1505 & 1506) all are 2A rating. If you have VOM (Volt Meter) then confirm +15Volt & -15Volt supply on G board. If you need further help, I can provide with pictures of related circuit portion.

Jul 07, 2008 | Sony KP-53V80 53" Rear Projection...

1 Answer

We have the RCA HD52w59 projection tv. The tv shuts itself off at different intervals. It takes approximately 1 minute to be able to turn the power button back on, however, I have to do that many times...

A problem in the deflection board. Could be a Cap. Resoldering the deflection board may take care of the problem. You need to call a TV man to do this kind of work.

Best of luck
Nour Sabre

Jul 28, 2011 | RCA HD52W59 HDTV Projection Television

3 Answers

TV has little stars, and cuts off automatically

Go to the Samsung website, find your model under the search function, and click on one of the returned links. Once there, you should see a link that says "Featured Accessories". Click on that and you will go to the Authorized Samsung parts site, where you can find the EXACT cost of the parts needed. Hope this helps. Mine went out, and it was only $65.

Sep 17, 2009 | Samsung DLP HL-P4663W 46" Rear Projection...

2 Answers

Bad Video Board

I know a company that can fix but I do not know your zip code to verify if they can do it in your area but its worth a shot please do not hate me if they do not work in your area but they specialise in Mitsubishi also do not stop there look on ebay you be surprized on what you may find there.

Jul 17, 2009 | Mitsubishi WS-65869 65" Rear Projection...

1 Answer

RCA projection HD52W59 won't turn on 2 green flashes at power but

Most techs dont know much about the ITC222A chassis which is what your model is. I would double check the ribbon cables that connect the Main deflection board and signal board. There are two of them just be sure they are proerly seated into their sockets as Those connections can cause that type of random operation

Jun 20, 2009 | RCA HD52W59 HDTV Projection Television

1 Answer

HD52W59 Convergence Power Supply

you can get the replacement ITC222 convergence power supply board at the following link. They have one at promotional sale price this week also under the sale items category.

Sep 07, 2008 | RCA HD52W59 HDTV Projection Television

2 Answers

RCA HD Projection TV Model HD52W59

you have a fusible link that has blown. This is what causes the convergence option no be erased from the menu. You will need to locate the blown link and replace it. They are identified by FLpreceeding the location number on the circuit board such FL221 and etc.

Mar 23, 2008 | RCA P61927 61" Rear Projection Television

1 Answer

Hitachi 53SBX59b Rear projection TV out of convergence

from you bought the tv and notice that it has that stain on the edge you should have taken it back as it was covered under it is getting worse it will cost you to get it fix your tv has a factory will have to call the repair man to fix your tv.good luck.

Apr 26, 2007 | Hitachi 53SBX59B 53" Rear Projection...

Not finding what you are looking for?
RCA HD52W59 HDTV Projection Television Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Ron Dufek
Ron Dufek

Level 2 Expert

397 Answers

Are you a RCA Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides